Search results for "dometic sealand t series waste discharge pump"

Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI CylinderNow with ORB Port Connection manifoldReversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.Benefits of the Octopus Reversing PumpsPiston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.Features: Average Current 4-6 amps Max Current 19amps 12vDC Cylinder Size: 11-22ci Flow Rate(adjustable): 600cc - 1.2 litre/min Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.35 lbs UPC: 628309272777

Read more less

52MM (2-1/16") OceanLink Waste Water Gauge - White Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tank Level Box Set: No Voltage - Input Range (Volts): 12/24 V Gauge Size: 2-1/16" Series: OceanLink Box Dimensions: 3"H x 5"W x 5"L WT: 0.35 lbs UPC: 7640178721357

Read more less

Shower Drain Box with 800 GPH Pump - 24VThis compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer. Specifications: Type: Shower Drains Gallons Per Hour: 800 GPH Volts: 24v Box Dimensions: 6"H x 10"W x 14"L WT: 4.2 lbs UPC: 042237106568

Read more less

Joker/Check Valve KitFor use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits.Fits inside the discharge elbow and the connection of the pump cylinder.

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841894 Brochure (pdf)

Read more less

Mastercraft Ballast Pump - 12VThe Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.Features: Same electrical connection as original OEM Same mounting as the OEM unit, no need to drill more holes The leader for flexible Impeller Ballast Pumps WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 5"H x 6"W x 10"L WT: 6.8 lbs UPC: 671880629003

Read more less

Heavy Duty Bilge Pump 1600 series 12v:The best choice when you are looking for high performance, heavy duty pumpsdesigned to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.CE-ApprovedFeatures: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs Specifications: Gallons Per Hour: 1600 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 6"L WT: 3.53 lbs UPC: 729321160049

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve Specifications: Type: misc Box Dimensions: 4"H x 6"W x 8"L WT: 0.2 lbs UPC: 733572050653

Read more less

Supersub 12V 500GPH Low Profile Non-Automatic Bilge PumpThe narrow low profile compact bilge pump rangeSupersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features and Benefits Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 0.76 lbs UPC: 766478951014

Read more less

Stainless Steel Washdown SpigotThis is a rugged all-316 stainless steel washdown spigot. It has a standard 3/4-in. garden hose thread that provides easy hose attachment for quick washdowns.Specifications: Water Connection (inch): 1/2" NPS-M threaded shaft  Flange Diameter (inch): 2-1/4" Mounting Hole (inch): 1" Shipping Weight: 2 lbs. Installation:For extra-thick bulkheads, use a 2" extender, Scandvik #10092*The "P" within the part number indicates retail packaging

Read more less

1100 GPH Livewell Pump Straight Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 1100 GPH Inlet Style: Straight Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 1-1/8" Voltage: 12VDC Amp Draw @ 12VDC: 4.7 AMP Fuse Size: 7.5 AMP Replacement Motor Cartridge PN: 67DR Quick Guide (pdf)

Read more less

Pressure Storage Tank - 0.5 Gallon DrawdownA pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications: Diameter: 8" Mounting: Stand 30/50 Drawdown: 0.5 gallon Thread NPT: 3/4"

Read more less