Search results for "dometic sealand t series waste discharge pump"

Ballast King Bronze DC Pump without Switch - 15 GPMWakeboard and Ski Boat Ballast PumpFeatures: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). Applications:The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Specifications: Body Materials: Bronze Impeller: Jabsco Neoprene compound Seal: Lip Type Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb  Voltage: 12 (Vdc) Amp Draw: 19 (amp) Fuse Size: 25 (amp) Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible  Duty Cycle: 30 Minutes Max Dimensions: 3 5/8 x 8 x 4 3/4 (inches) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 15 GPM Volts: 12v Box Dimensions: 5"H x 6"W x 12"L WT: 8.6 lbs UPC: 671880626286 Brochure (pdf)

Read more less

Aqua Jet II Duo 2L WPS - 10.4 GPM - 12V - 2.8 BarThe five-chamber Aqua Jet II Water Pressure Systems (WPS) series provides a reliable core for small boat and recreational vehicle water pressure systems. Compared to conventional three- or four-chamber diaphragm pumps, the Aqua Jet II delivers significantly lower noise and reduced water pulsation. For optimal performance, it is recommended to install WPS pumps with an accumulator tank. Always use a PUMProtector inlet strainer before the pump intake.Specifications: Connection: Inlet 3/4” Hose Barb - Outlet 3/4” Hose Barb Fuse Size: 25amp 12V Capacity: 10.4 GPM Pressure Cutoff: Top Pump: 30 psi / 2.1 bar, Bottom Pump: 41 psi/2.8 bar Brochure (pdf)

Read more less

Aqua Jet II WPS 4.0 GPM - 12V - GSP 2.8 BarThe WPS pump is a five-chamber positive displacement diaphragm pump.This pump is ideal for pressurizing water in a closed system, such as one found in a boat or recreational vehicle.It can easily build the pressure required for a pressurized water supply system.Features: Quiet operation Smooth flowing Self-priming Integrated pressure switch turns the pump on and off automatically when the tap is opened and closed Built-in bypass valve which reduces the need for a storage tank (only WPS 3.5) Dry running without damage Low power consumption Quick disconnect fittings Max Suction Lift: 6.5' Owner's Manual (pdf)

Read more less

Marine Elegance™The Marine Elegance is the ultimate in electric marine toilets. Offering the luxury of a full size seat in a one piece china bowl developed with a unique mounting system. It offers a super small footprint at just 8 ½” x 9 ¾”.  All toilets are now supplied with a slow close toilet seat that includes stops to help prevent the seat from shifting while in use during heavy seas. With the same Vortex-Vac technology also offered in the Atlantes Freedom, it creates a vacuum in the bowl, eliminating the need for extra vacuum generation equipment. Unlike typical vacuum toilet systems, a convenient, built-in shredder with stainless steel blades transforms waste into small particles to reduce clogs. The efficient action of the pump quickly and quietly pulls waste from the bowl with the ability to push the waste an amazing 10' vertically and 100' horizontally. Performing at a noise level less than 63 decibels it won’t alert everyone in the boat or on the dock that nature is calling. Benefits: Low water usage Small footprint for compact installation One piece vitreous china bowl Angled back for contoured fit Quiet operation Unmatched rinsing capabilities Low water consumption Built in shredder reduces clogs Can pump 10ft vertically, or 100ft horizontally Heavy Duty Push Button Switch:Providing only the ability to flush with no independent control of water or discharge WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Bone Gallons Per Minute: 3 GPM Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: RAW Suction Lift (ft.): 4' Volts: 12v Type: Toilet Size: Household Size Box Dimensions: 17"H x 23"W x 23"L WT: 53 lbs UPC: 085462024788 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Quad Pump - 24VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity.  BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 24VDC:Four motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  24 VDC (20 – 26 VDC)  Max current: 0.7 amps (24 VDC) Idle Current: 0.03 amps (24 VDC)  Pump:  Maximum flow: 1.0 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight: 2.4 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Aqua Jet II WPS 5.2 GPM - 12V - GSP 2.8 BarThe WPS pump is a five-chamber positive displacement diaphragm pump.This pump is ideal for pressurizing water in a closed system, such as a boat or recreational vehicle.It can easily build the pressure required for a pressurized water supply system.Features: Quiet operation Smooth flowing Self-priming Integrated pressure switch turns the pump on and off automatically when the tap is opened and closed Built-in bypass valve which reduces the need for a storage tank (only WPS 3.5) Dry running without damage Low power consumption Quick disconnect fittings Max Suction Lift: 8.2' Owner's Manual (pdf)

Read more less

Electric Marine Toilet - Twist Flush - Regular SizeThe Commodore Electric Marine Toilet – Regular Size offers the perfect combination of modern convenience, durability, and performance for any marine environment. Equipped with a powerful electric flush pump and a built-in macerator featuring a stainless steel chopper plate, this toilet ensures efficient waste grinding and evacuation. The soft-close seat adds comfort, while the easy-to-clean ceramic bowl with smooth contours enhances hygiene and prevents buildup.Designed for versatility, the CM2RMT marine toilet is suitable for above and below-waterline installations and supports both left- and right-handed configurations. Its permanent magnet motor with a stainless-steel shaft delivers reliable performance and long-lasting operation, even in the harshest marine conditions. Built with corrosion-resistant materials, this electric toilet is the ideal upgrade for boat owners looking to convert a manual head into a hassle-free electric solution.Features: Powerful Electric Flush Pump: The integrated flush pump provides an open flow rate of 18.9 LPM, delivering a reliable, powerful rinse that ensures a clean and efficient flush every time. Built-In Macerator with Stainless Steel Chopper Plate: The self-priming macerator pump grinds waste efficiently, reducing the risk of clogging and enabling smooth discharge through the plumbing system. Soft-Close Seat for Comfort: The soft-close seat eliminates slamming, providing a quiet and luxurious experience while ensuring durability in high-use marine settings. Easy-to-Clean Ceramic Bowl: Featuring a smooth, crevice-free design, the high-quality ceramic bowl is simple to clean, improving hygiene and reducing maintenance time. Flexible Installation Options: Suitable for both above- and below-waterline installations with left- and right-handed compatibility, offering versatility for any marine setup. Corrosion-Resistant Marine-Grade Construction: Built with all corrosion-resistant materials and a stainless-steel motor shaft to withstand saltwater environments and ensure long-lasting durability. Converts Manual Heads to Electric Operation: Upgrade your existing manual toilet to an electric system without replacing the entire unit, saving time and costs while adding modern convenience. Permanent Magnet Motor: The enclosed, permanent magnet-type motor with stainless steel components ensures quiet operation, low power draw, and a long service life. Specifications: Type: Electric Control Type: Switch Panel Max Draw: 24A @12V 13A @24V Size: Regular Diameter: 3/4" Inlet 1" Discharge Material: Ceramic Bowl, Soft Close Seat Dimension: 19.29"L x 17.52"W x 16.93"H Included Components: Commodore CM2RMT Electric Marine Toilet – Regular Size Heavy-Duty Rotary Switch Panel 3/4" Inlet and 1" Discharge Hose Adapter Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" Type: Toilet Volts: 12 Box Dimensions: 15"H x 20"W x 21"L WT: 39.2 lbs UPC: 817683023420 Brochure (pdf)

Read more less

500GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104786

Read more less

Motor Pump Assembly 12V for Quiet Flush E2Jabsco motor pump assembly for the Quiet Flush E2, 12V toilets.

Read more less

Single Pump - 24VDCBILGE-B-DRY is the world’s only Smart Device-enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device-enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly, low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. Newly designed, ruggedized, single pump which includes: An anodized aluminum enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing.  Four hard points for mounting in extreme conditions. Reduced size for easy installation in tight compartments. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 24VDC: One motor/diaphragm pump 10 feet of input tubing provided (for pickup) 6 feet of output tubing provided (for discharge) Input tubing diameter (PVC or PU) - 1/4” OD  Output tubing diameter (PVC or PU) - 3/8” OD Included with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup.  BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  24 VDC (20-26 VDC) Max current: 0.18 amps (24 VDC) Idle Current: 0.03 amps (24 VDC) Pump:  Maximum flow: 0.25 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 2.25 H x 4 W x 5.25 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure:57.15 H x 101.6 W x 133.35 L   Rectangular Pickup: 25 H x 60 W x 100 L Weight 1.6 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Dual Pump - 24VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina! Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal.  The pump diaphragm design can run dry for extended periods without damage.  A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.BBD Dual Pump 24VDC:Two motors/diaphragm pumps10 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU)-3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  24 VDC (20-26 VDC)  Max current: 0.37 amp (24 VDC) Idle Current: 0.03 amp (24 VDC) Pump:  Maximum flow: 0.50 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.0 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Nano Eco Compact Toilet Raw Water Kit with Inlet Pump - 24VFrom the experts in macerating toilets, Nano toilet utilizes Turbine Technology to produce a powerful, clog-resistant flush. This model is the ultimate combination of a highly efficient marine toilet and the smallest design capable of offering the same comfort as bigger units. It’s the result of a strong relationship with the market and fulfills new requirements for vessels below 50′ (45m). The Thetford Marine product development team has created an extremely elegant design, but also very flexible to install, thanks to its compact size.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Features: Uses 2 check valves, and this, combined with a water trap, ensures there are no odor issues Incredibly quiet operation Can use both raw water and pressure water flush Leaves a clean, dry bowl after every powerful flush User-friendly Eco rocker switch (to reduce energy and water consumption) or a smart flush controller with high-end flush and tank control features This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less