Search results for "dometic sealand t series waste discharge pump"

BLASTER™ II Washdown Pump Kit - 12 VDC - 3.5 GPM w/25' Hose, Nozzle, Strainer & FittingsSHURFLO's 4338 series wash down pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all deck wash down plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the BLASTER II Series pumps are designed for the toughest marine wash down applications. SHURFLO's quality reputation has been built on the reliability and dependability of every pump we build. The BLASTER II Series wash down automatic demand pumps are thermally protected and can run dry without damage. Fittings and nozzle included. Ignition protected.Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 45 Gallons Per Minute: 3.5 GPM Box Dimensions: 6"H x 10"W x 17"L WT: 9.05 lbs UPC: 752324330065

Read more less

Compass Eco Toilet - Low, White - 12VThe narrow footprint and smart back of the Compass toilet give maximum space and maximum flexibility wherever it is installed on board. It can go straight to a wall or even further towards the hull thanks to the cutaway. The Compass is not limited by a vertical back. This way, the visual installation remains perfect with whatever installation space you have. The small footprint and the hose design facilitate a very easy installation. The discharge pipes can easily be connected either below the step or surface-mounted in all directions. By having both a high and a short profile, the Compass range offers maximum flexibility on board.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Both the Compass High and Short versions are equipped with an innovative soft closing system. A gentle finger touch to the lid activates the soft-close damper mechanism, which controls the closing speed of the cover. In addition to user convenience, a slow-closing lid keeps noise to a minimum and prevents potential damage to the toilet seat.The soft-close damper mechanism is a design original to Tecma.Features: Italian ceramic Wide range of control panels (sold separately) Silent flush Low consumption Technical Specifications: Weight - 40 lbs Water Usage - 0.5-2L/0.1-0.5 gal per flush Color - White Seat and Cover - Thermosetting with soft closing Outlet Pump - MAC 4 12/24V Inlet Device - Solenoid This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Inlet Size: 1/2" Operation Method: Electric Outlet Size: 1/4" Rinse Water: Fresh Size: Compact Size Suction Lift (ft.): 13' Type: Toilet Volts: 12v Box Dimensions: 19"H x 25"W x 25"L WT: 51.1 lbs UPC: 850080338315

Read more less

12 GPM Macerator Pump - 24VThe Macerator Pump is engineered to tackle the toughest marine and RV waste management challenges. Featuring a powerful quad-blade chopping system and a triple-sealed motor, this pump is built to easily handle the emptying of holding tanks, fish boxes, and livewells. Its robust design includes anti-clog technology, ensuring consistent operation even with challenging debris.This pump delivers an impressive 12 GPM flow rate, allowing you to empty a 30-gallon tank in less than three minutes. With a self-priming suction up to 4 feet, the Macerator Pump guarantees reliable performance every time. Designed for durability, the pump's sealed motor is o-ring protected, thermally shielded, and powder-coated to resist both internal and external corrosion. The quick-connect wiring system simplifies installation and replacement, making this pump a dependable choice for marine and RV applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows the user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Quad-Blade Chopping Design: The advanced quad-blade system efficiently grinds waste, minimizing the risk of clogs and ensuring consistent operation even with demanding tasks. High Flow Rate: Delivers a powerful 12 GPM (45 LPM), making it ideal for quickly emptying holding tanks, livewells, and fish boxes in less than three minutes. Triple-Sealed Motor for Durability: Features o-ring sealed end bells, sealed bearings, and a powder-coated shell, protecting the motor from internal and external corrosion in harsh marine environments. Self-Priming to 4 Feet: The pump’s self-priming capability ensures reliable suction, making it suitable for varied installation heights and conditions. Anti-Clog Technology: Includes a rear anti-clog system and an easy-access knob for clearing blockages, ensuring smooth operation during waste disposal. Ignition Protected: Designed to meet ISO 8846 Marine standards, making it safe for use in engine compartments and other confined spaces. Quick-Connect Wiring: Simplifies installation and replacement, saving time and effort for users during maintenance or upgrades. Run-Dry Protection: Built-in thermal sensors allow the pump to run dry for short periods, preventing damage during priming or unexpected interruptions. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Voltage: 24V Open Flow Rate: 12 GPM (45 LPM) Ports: 1-1/2” MNPT Inlet, 1” Hose Barb Outlet Impeller Material: Rubber & Copper Max Draw: 12.0A (12V) / 6.0A (24V) Dimensions (L x W x H): 13.78" x 5.12" x 4.33" (35.0 x 13.0 x 11.0 cm) Included Components: Commodore DC Macerator Pump (24V) 1-1/2” MNPT Inlet Adapter 1” Hose Barb Outlet Adapter Quick-Connect Wiring System Specifications: Color: Black/White Gallons Per Minute: 12 Inlet Size: 1-1/2" Operation Method: Electric Outlet Size: 1" Type: Macerator Pumps Volts: 24 Box Dimensions: 5"H x 6"W x 13"L WT: 5.8 lbs UPC: 817683023277

Read more less

MACERATOR Pump w/180° Port - 12 VDC, 13 GPMSHURFLO's MACERATOR is designed to accommodate the need for a reliable, high performance waste evacuation pump. This pump incorporates a high quality motor with a new seamless shell design that is thermally protected. The unique features of the MACERATOR include a premium impeller design with run dry capability, a dual blade and housing construction for problem free operation.Features: 180° Port 12 VDC Seamless Motor Shell Sealed Manual Turn Key Run Dry Capability Dual Blade Design Ignition Protected Thermally Protected 1 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 13 GPM Type: Waste Pumps Box Dimensions: 5"H x 6"W x 11"L WT: 5.08 lbs UPC: 752324010141

Read more less

AquaT Electric Marine Toilet - Super Compact - 12VPriced competitively, the fine finish and design of this toilet are remarkable. Made from white vitreous porcelain with corrosion-resistant parts, this AquaT marine toilet is quiet, robust, and easy to clean.It is probably fair to think of most toilets as commonplace products, but one look at the features and it's easy to see that the AquaT is far from ordinary. Quiet, hygienic, and reliable, the AquaT marine toilet is perfect for almost any marine toilet room. Features: Limited 2-Year Warranty Silent flush and discharge operation Included control panel for rinse and discharge pump; one-button multi-function discharge and rinse Flexible hole pattern on the base for easy substitution with the most common toilets on the market Smooth design for easy cleaning Accessible mounting points for fast installation Standard fastenings, logic located, no need for special tools High-capacity discharge pump Built-in rinse pump for raw water or fresh water from a separate toilet water tank (do not connect the toilet rinse pump to the boat's fresh/ drinking water system) Specifications: Volts: 12V Style: Super compact (smaller and lighter bowl, requiring less space) Specifications: Color: White Operation Method: Electric Type: Toilet Box Dimensions: 16"H x 17"W x 18"L WT: 25.8 lbs UPC: 7330717013462

Read more less

Macerator Pump TA3P10-19, 12vThe Johnson Pump brand TA3P10-19 Macerator pump takes care of the toilet/livewell waste, shredding it before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.Features: Ignition protected motor, conforming with ISO 8846 Marine Mounting bracket for easy replacement Extremely energy efficient Rotary cutter casing of PET (thermoplastic polyester) Directly connected to sewage line or holding tank Capacity at 0.2 bar (6.7 ft):37 l/min - 10 GPM Inlet Connection:11/2" (dia 38 mm) hose or 11/2"NPT Amperage: 15 A Fuse Size: 20 A Outlet Connection: 1" (25.4 mm) hose Motor: 12V DC (with built-in thermal protection) Pump Body: Phenol Plastic (PF) Impeller: Nitrile Cutter Casing: Thermoplastic Polyester (PET) Shaft: Stainless Steel Seal: Lip Seal Length: 230 mm - 9.06" Width: 108 mm - 4.25" Height: 82 mm - 3.23" Weight: 1.9 kg - 4.2 lbs *CE-Approved Specifications: Volts: 12v Outlet Size: 1" Inlet Size: 1-1/2" Gallons Per Minute: 10 GPM Type: Waste Pumps Box Dimensions: 4"H x 6"W x 11"L WT: 4.8 lbs UPC: 787766709018

Read more less

Gulper 320 High Capacity Waste/Bilge Pump 24VHigh Capacity Waste Pump- Fast Drainage and space saving on boardNo clog, no filter waste pump built on more than a decade of market leading pump technologyGulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited.Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High - dry and protected - Remote mounting allows easy access Long life - runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Inlet Size: 3/4" Operation: Non-Automatic Outlet Size: 3/4" or 1" Suction Lift (ft.): 10' Volts: 24v Type: Waste Pumps Operation Method: Non-Automatic Box Dimensions: 6"H x 8"W x 13"L WT: 4.5 lbs UPC: 766478942739

Read more less

Rule-Mate 1500 GPH 12 Volt Fully Automated Bilge PumpThe Rule-Mate® 1500 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate IntelligenceRule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 1500 GPH (6819 LPH) at 0' (13.6V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 25 GPM Gallons Per Hour: 1500 GPH Type: Electric Box Dimensions: 5"H x 7"W x 8"L WT: 4.3 lbs UPC: 042237114198 Owner's Manual (pdf)

Read more less

Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry ProtectionWaste EvacuationThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operationIt is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.Fish Box and Livewell Tank EvacuationThe Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.Features: Impeller: Jabsco Nitrile compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design Seal: Lip Type WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 1-1/2" Outlet Size: 1" Volts: 12v Type: Waste Pumps Box Dimensions: 4"H x 5"W x 13"L WT: 5.3 lbs UPC: 671880564373 Owner's Manual (pdf)

Read more less

Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12VThis is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Kit Includes: Attwood Tsunami Mk2 500 GPH Pump Washer / Non-Return Valve 90-degree Outlet Straight Outlet 3/4" x 5' Pump Hose 3/4" Thru-hull fitting 2-way on/off switch with bezel plate Snap-It hose clamps Wire Kit Installation Kit Easy Installation & Service: GPH (Gallons Per Hour): 500 GPH 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlets reduce time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12VDC Fuse Size: 3 AMP Wire Length: (inch) 29" / (mm) 735mm Hose Diameter: (inch) 3/4" and 1" *Caution: Bilge pump switches are not external ignition protected Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Electric Volts: 12v Box Dimensions: 6"H x 7"W x 9"L WT: 1.75 lbs UPC: 022697024213 Quick Guide (pdf)

Read more less

VersiJet Industrial Diaphragm Pump - 115V, 4 GPM, 60 PSIVersiJet Series pump is engineered for applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing. Each pump is constructed with a glass-filled polypropylene upper housing, coated motor, co-molded Santoprene diaphragm, and EPDM check valves and seals to maximize durability and service life. The integrated pressure switch ensures automatic operation, while the self-priming design allows for up to 8 feet of dry lift. VersiJet pumps can run dry without damage, and their quiet, smooth performance minimizes disruptions in busy work areas. Quick-connect ports streamline installation and maintenance, so operators can attach or remove hoses and fittings quickly without tools for fast pump swaps or service. It delivers up to 4 GPM and handles a maximum pressure of 60 PSI. This pump is self-priming up to 8 feet, and it includes a built-in pressure switch that automatically shuts off the pump when system pressure reaches 60 PSI. Upgrade your pumping system today and keep your operation flowing without interruptions!Benefits: Self-Priming: Draws liquid efficiently with up to 8 feet (2.4 meters) of dry prime, allowing the pump to pull fluid from the source without manual priming. Runs Dry Without Damage: Designed to operate safely even when the fluid supply is interrupted, meaning the pump will not suffer internal damage if left running without liquid, giving operators added protection from accidental dry runs and helping prevent costly downtime. Integrated Excessive Pressure Protection: A pressure switch shuts off the pump automatically when system pressure reaches 60 PSI. This feature helps prevent over-pressurization, protecting downstream equipment and extending pump life by minimizing unnecessary wear. Quiet, Efficient Operation: Reduces noise and energy usage through a four-chamber diaphragm design and noise-dampening baseplate. Reliable Performance: Designed for industrial fluid transfer and spraying in harsh environments. Long-Lasting Chemical-Resistant Construction: Features glass-filled polypropylene housing and EPDM seals for enhanced chemical resistance and durability. Easy Installation: Quick-connect fittings speed up maintenance and replacement. Applications: Liquid Transfer Spraying Cooling, Circulation Filtration Dispensing Specifications: Model: Q40FF-118S-2P Open Flow Rate: 4 GPM (15 LPM) Pressure Switch Cut-Off: 60 PSI (4.1 BAR) Max Operating Pressure: 60 PSI (4.1 BAR) Max Inlet Pressure: 30 PSI (2.2 BAR) Self-Priming Capability: Up to 8 ft (2.4 m) Run-Dry Capable: Yes Nominal Voltage: 115 VAC Voltage Range: 104–126 VAC Max Current Draw: 1.3 Amps @ 60 PSI Leads: 14" (355mm) 18 AWG Wire Connection: Stripped Wire Duty Cycle: Intermittent Port Fittings: 2 x 3/4" (19 mm) straight hose barb Fluid Temperature Range: 32ºF – 140ºF (0ºC – 60ºC) Internal Bypass: Yes Self-Priming Capability: Up to 8ft (2.4m) Dry Prime Run-Dry Capable: Yes Upper Housing: Glass-Filled Polypropylene Lower Housing: Cast Aluminum Diaphragm: Santoprene Check Valve Retainer: Polypropylene Pump Head: Seals: EPDM, Fasteners: Stainless Steel Baseplate: Nylon, Rubber Feet Dimensions: 11.25 x 5.47 x 5.07 in (286 x 139 x 129 mm) Weight: 5.2 lbs (2.4 kg) Mounting: Horizontal (preferred) or vertical with the pump head down Certifications: UR listed; IPX6 rated Replaces Flojet Models; 04300042A, 04300043A

Read more less

Self-Priming Dual Blade Macerator Pump - 24VDC, 13GPMDesigned specifically for sanitation waste and fish box evacuations, SHURFLO®'s Macerator pump features a premium impeller design with run-dry capability and includes our seamless shell motor with o-ring sealed end bells and a sealed manual turn key. SHURFLO®'s unique dual blade and housing construction ensures problem free pumping, providing superior performance in harsh marine environments. Thermally protected and ignition protected. 1 Year WarrantySpecifications: 24 VDC, 13 GPM [49 LPM] 9 Amps (Max.) 1-1/2" [38.1mm] Inlet Barb 1-1/2" [38.1mm] NPT Outlet Port 1" [25.4mm] Barb Dimensions: 10.6" [269mm] x 4.9" [125mm] x 3.8" [97mm]This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Outlet Size: 1-1/2" Inlet Size: 1-1/2" Gallons Per Minute: 13 GPM Volts: 24v Type: Waste Pumps Box Dimensions: 5"H x 6"W x 11"L WT: 5.2 lbs UPC: 752324004157

Read more less