Products

Defender Atomizer - CordedThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!Features:Version with cordIncludes: 28oz canister 16 ft. cord Adjustable spray nozzle Jog wheel The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 7"H x 8"W x 11"L WT: 4.05 lbs UPC: 860007772726

Read more less

Dock & Deck Cleaner - 1 GallonKeep the dock and deck looking great while reducing harmful chemical runoff!The base structure for the Xanigo Marine Dock & Deck Cleaner formula is made from plants, which enables it to have 94% bio-content as certified by the USDA. This uses next-generation renewable biosurfactant technology, is regarded as readily biodegradable, and is high-performing with high efficacy. Does not contain: Palm Oil, 1, 4-Dioxane, Formaldehyde, Proposition 65 Chemicals, Sulfates, Sodium Hydroxide, Glycol Ethers, Phosphates, Phthalates, Parabens, and AmmoniaInstructions for Use: For docks and decks, Xanigo Marine recommends a 1:5 to 1:20 dilution rate to enable proper cleaning. 1 gallon of Dock and Deck Cleaner to 5 to 20 gallons of water, depending on the job. This dilution ratio will provide effective cleaning power for composites, wood, and concrete Use a proper deck and dock brush with a minimum 2" bristle. The stiffness of the bristle should be tested on the dock users are trying to clean to determine which is the most effective For tough stains like blood, set-in bird drippings, or oils/greases, pour full strength into a spray bottle and spray the spots before scrubbing. After scrubbing the deck or dock, rinse with fresh water Specifications:Bottle Size: 1 gallonThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly!

Read more less

Mold & Mildew Preventer - 1 GallonSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life of 1.5 years unopened, 1 year opened Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 6"H x 6"W x 12"L WT: 8.6 lbs UPC: 860007772719 Quick Guide (pdf)

Read more less

Marine Mold & Mildew Preventer - 1qtSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.25 lbs UPC: 860007772702 Quick Guide (pdf)

Read more less

Marine Mold & Mildew Preventer with FREE Defender AtomizerMold & Mildew PreventerSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture. Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days. Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life of 1.5 years unopened, 1 year opened Defender Atomizer - CordedThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!

Read more less

Mold & Mildew Stain Remover - 16ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 16 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 860007772771 Quick Guide (pdf)

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Professional Formula Rust Remover - 16ozCorrosion happens. When it does, it is not forever. Our Professional Formula rust remover is designed to eliminate rust stains. When combined with our Corrosion Inhibitor, you can establish a protocol to reduce rust stains and ongoing corrosion.Xanigo Marine Rust Remover is a concentrated, acid-based cleaning solution formulated to dissolve iron oxide (rust) and mineral-based corrosion from compatible surfaces. The formulation combines fast-acting acidic components with wetting and penetration agents to ensure e cient rust removal, even on heavily oxidized areas. The product is designed for professional and industrial use where controlled, effective corrosion removal is required.Recommended Uses: Rust and corrosion removal Iron oxide staining elimination Surface preparation before compounding Industrial, automotive, marine, and maintenance applications Performance Characteristics: Rapid rust dissolution Effective at room temperature Penetrates porous corrosion layers Minimal residue when properly rinsed Controlled foaming for vertical surfaces Safe On: Base steel and iron Carbon steel Ferrous metal components Gel coat Paint Not Recommended For: Prolonged exposure to aluminum and stainless steel Anodized metals Natural stone (marble, limestone, travertine) Decorative or soft metal finishes *Always test on an inconspicuous area prior to full application Specifications: Type: Hard Water Box Dimensions: 3"H x 6"W x 11"L WT: 1.4 lbs UPC: 860012752553 Quick Guide (pdf)

Read more less

Quick Wash - 32ozStreak Free - Clean Rinse - Fresh Scent! The Quick Wash provides solid cleaning power and a long-lasting, tropical fragrance that will deodorize and leave your boat smelling fresh and clean for hours. Simply dilute the professional concentrate to achieve the necessary cleaning power and be amazed at the speed and ease with which it does the job. The Quick Wash rinses clean, leaves no streaks, and controls odors.Xanigo Marine professional streak-free Quick Wash is an integral part of keeping your boat clean, fresh, and mold and mildew-free. Designed as a part of the Xanigo Marine Mold and Mildew Prevention System, the Quick Wash ensures that once your boat is protected with Xanigo Marine Mold and Mildew Preventer, it remains protected for as long as possible. To achieve the best results overall, use the full Xanigo System, which includes this non-ionic wash, which does not break the mold and mildew preventer's bond.We say it all the time, "your results are dependent on how well you follow the protocol:' We designed our chemistry and protocol to work together, and the results will speak for themselves. Welcome to the Xanigo Marine family.Features: VOC Free and pH Neutral Controls odors with a fresh, tropical scent Keeps mold & mildew preventer active Directions for Use:  Quick Wash is a concentrated formula that can be used with a garden hose sprayer, pressure washer, or bucket and brush. Dilute the product based on your cleaning needs. (Do not brush surfaces that have been treated with Xanigo Marine Mold and Mildew Preventer. Wipe using a microfiber cloth. Light Duty Cleaning / Refresh: Dilute 2oz. per gallon of water Medium Duty Cleaning: Dilute 4-6oz. per gallon of water Heavy Duty Cleaning: 12-16oz per gallon of water

Read more less

Shore Power Cord & Rub Rail Cleaner - 32ozEnsure your boat is always in pristine condition with Xanigo Marine's Shore Power Cord & Rub Rail Cleaner. This powerful, bio-based solution is designed to clean and restore your shore power cords and rub rails with ease. Our product includes an innovative abrasive mitt to provide a simple, effective cleaning method. Perfect for routine maintenance to prevent problems before they start.Instructions for Use:1. Spray a small amount in an inconspicuous area to test compatibility.2. Spray the cleaner on the surface of the cord or rub rail and let it sit for 30 seconds.3. Use the included abrasive mitt, placing the cord in the palm of the mitt.4. Wrap your mitted hand around the cord or use the mitt flat on rub rails.5. Clean with a back-and-forth motion and watch as your cord and rub rail return to a like-new condition.

Read more less

Shore Power Cord & Rub Rail Cleaner with Glove - 1 GallonEnsure your boat is always in pristine condition with Xanigo Marine's Shore Power Cord & Rub Rail Cleaner. This powerful, bio-based solution is designed to clean and restore your shore power cords and rub rails with ease. Our product includes an innovative abrasive mitt to provide a simple, effective cleaning method. Perfect for routine maintenance to prevent problems before they start.Instructions for Use: Spray a small amount in an inconspicuous area to test compatibility. Spray the cleaner on the surface of the cord or rub rail and let it sit for 30 seconds. Use the included abrasive mitt, placing the cord in the palm of the mitt. Wrap your mitted hand around the cord or use the mitt flat on rub rails. Clean with a back-and-forth motion and watch as your cord and rub rail return to a like-new condition.

Read more less

Throttle Shine Marine Quick Detailer - 32ozYour boat shouldn’t just be clean. It should look fast sitting still. Throttle Shine Quick Detailer is a high-performance marine detail spray designed to remove light contamination while restoring deep gloss and creating an ultra-slick surface feel. Perfect for a quick wipe-down at the dock, before guests arrive, or after a day on the water.The fast-ashing formula lifts light dust, salt film, and residue while enhancing clarity and reflectivity across gelcoat, paint, metals, and more. The result is a smooth, high-gloss finish that buffs effortlessly and leaves no streaks or haze behind.The Benefits: Instant Gloss Enhancement Quickly restores clarity and reflectivity to surfaces for a freshly detailed appearance. Ultra-Slick Surface Feel Leaves behind a smooth, low-friction Finish that looks sharp and feels incredible. Fast Dockside Cleanup Perfect for quick wipe-downs before guests arrive or after a day on the water. Streak-Free Finish Flashes quickly and bu s e ortlessly without haze or residue. What it Does: Removes dust, salt film, and light residue Restores clarity and reflectivity Enhances gloss instantly Creates a smooth, low-friction finish Leaves a streak-free, residue-free surface Safe On: Gelcoat Marine clearcoat Fiberglass Painted surfaces PPF & wraps Vinyl plastics Polished metals Specifications: Type: All Purpose Box Dimensions: 4"H x 9"W x 11"L WT: 2.25 lbs UPC: 860012752546 Quick Guide (pdf)

Read more less