Products

Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02).The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably. Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Freedom XC PRO Marine 2000W Inverter/Charger - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Freedom XC PRO Marine 3000W Inverter/Charger - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Gateway Communication DeviceXantrex Gateway allows you to conveniently monitor and control all your favorite Xantrex products via wireless Wi-Fi connection using your smartphone, tablet, PC, or the Xantrex Gateway Touchscreen Panel 808-0890. Whether it is configuring the transfer relay on your inverter, troubleshooting your inverter/charger, checking your battery status, or turning your inverter off to save power, Gateway helps you do it all. Monitoring and configuring settings on your Xantrex devices has never been this easy.Features: Save dashboard real estate in your RV or boat by monitoring and controlling all your Xantrex products on one device Connect to your Xantrex devices via smartphone/tablet/PC wirelessly with Xantrex Gateway Monitor the status of your devices, including current, voltage, and battery state of charge Configure settings such as the transfer relay, or enable/disable your inverter to save power

Read more less

Gateway Touchscreen DisplayNo more compatibility issues or complex setups. Xantrex Gateway gives you power at your fingertips to integrate, monitor, and control all your essential components — batteries, inverter/charger, and solar controller into one seamless system for effortless operation.Xantrex offers a complete energy system that includes easy-to-use connectivity. The Xantrex gateway provides a coordinated view and easy drill-down access to control and monitor your system as a whole rather than single separate components. Remote monitoring with WiFi and Bluetooth capabilities makes your life easier than ever before.Features: Replace multiple displays with one Error alerts to monitor performance Coordinated system control What's Included?Xantrex Gateway Touchscreen PanelHDMI and USB 39" (1.0M Cables)Specifications: Housing/Mounting System: ABS Plastic, Wall Mount 4 screws IP Rating: Indoor IP42 front; IP21 back Display Resolution: 1024 x 600 Weight: 0.8lb (360g) Dimensions: 7.2 x 5.5 x 0.975in (183 x 140 x 25mm)

Read more less

Convenient Dual Battery Bank ChargingXantrex digital echocharge (part#82-0123-01) is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex echocharge detects when the house battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by echocharge is limited to 15 amps.Product Features 15 A maximum charge current Automatically adjusts for 12 or 24 volt battery banks (both battery banks must be the same DC voltage and battery type) Automatically switches on/off without affecting the in-house battery bank or over-charging Utilizes excess current from the primary charging source Built-in thermal and over-current circuits Reverse polarity protection Easy three wire installation WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 15a Charging Banks: 1 Portable: No Charger Input - Voltage: 120v Charger Output Voltage: 12/24v Box Dimensions: 3"H x 7"W x 10"L WT: 1.2 lbs UPC: 647912105722 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Heart FDM-12-25 Remote Panel, Battery Status & Freedom Inverter/Charger Remote ControlProvides Valuable Inverter/Charger System Monitoring and ControlThe Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458, and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate, and install, and all controls can be accessed directly from the front panel.Note: Not for Freedom HF or Freedom SW Series.Features: Independent invert and charge on/off controls Push button control of power sharing, equalizing, and battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage, and DC amperage LED warning indicators for low battery and overload warning Splash-resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One-year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

PROwatt SWInline Transfer RelayAn easy to mount 15A Inline Transfer Relay provides switching between shorepower and inverter AC source. It comes with a power plug for convenient connection to the inverter GFCI and a hardwire cord for the AC input and output interface. It is available as an accessory to the Prowatt SW product line.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

LinkLITE Battery MonitorBattery Status At A GlanceThe LinkLITE battery monitor can measure currents up to 1,000Amps. It selectively displays voltage, charge and discharge current, consumed amp hours and remaining battery capacity. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.DescriptionDefining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkLITE to measure currents up to 1,000Amps respectively.The LinkLITE selectively displays voltage, charge and discharge current, consumed amp hours and remaining battery capacity. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.Performance Features Read your battery bank like a fuel gauge Provides critical information about the status of your battery bank Displays voltage, current, consumed amp hours and remaining battery capacity Two battery inputs Auto sensing battery voltage inputs Large backlit LCD Display Quick nut mounting construction Programmable alarm relay Shunt selection capability enables flexible system integration Splash proof front panel 500 Amp shunt included CE and e-mark certified WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

LinkPRO Battery MonitorBattery Status At A GlanceDefining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkPRO to measure currents up to 10,000 Amps.The LinkPRO selectively displays voltage, charge and discharge current, consumed amp hours, remaining battery capacity and the time remaining of your battery bank. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery.It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.Performance Features Read your battery bank like a fuel gauge Provides critical information about the status of your battery bank Displays voltage, current, consumed amp hours and remaining battery capacity Two battery inputs Auto sensing battery voltage inputs Large backlit LCD Display Quick nut mounting construction Programmable alarm relay Shunt selection capability enables flexible system integration Splash proof front panel 500 Amp shunt included CE and e-mark certified Displays time remaining Communication/expansion port Stores a wide range of history events in internal memory Advanced programmable alarm relay Battery temperature sensor input WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

PowerHub 1800A Clean, Green, Backup Power SolutionThe Xantrex PowerHub is a combination of an inverter/charger module capable of delivering up to 1800 watts of household power. It is the first backup power solution to operate with solar and wind inputs. Power from a generator or the utility grid can also be used with the PowerHub system to recharge its batteries. The PowerHub provides an affordable, high-output, primary power solution for an off-grid cottage or cabin, as well as backup power for grid-connected homes when the power goes out. It is scalable up to 400 amp-hours of energy, allowing customers to build their system based on their power requirements.Features: Never worry about running out of power – renewable power sources, solar and wind, sustain the PowerHub’s battery charge indefinitely An excellent alternative to a generator – designed for indoor use, with no fuel, fumes or noise Add it to a grid-tie solar energy system for backup power Modified sine wave inverter/charger with battery box The battery box stores up to 200 amp-hours of battery power (single battery box included; batteries purchased separately) A second battery may be connected to double the battery capacity (additional battery box and batteries sold separately) Designed to include a generator as part of the system; generator power can pass through the unit to the AC outlets, and recharge the batteries Integrated transfer switch 40-amp three-stage charger Four AC outlets with hardwire option Two DC inputs for solar and/or wind connections Full-feature LED display for system monitoring WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Cont. Output Wattage: 1440w Charger Input - Voltage: 120v Charging Banks: 1 Charger Output - Amps: 40a AC Connection Type: GFCI Outlet DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 2880w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: Modified Sine Wave Charger Output Voltage: 12v Box Dimensions: 17"H x 19"W x 24"L WT: 66.45 lbs UPC: 715535114626

Read more less