Products
Xantrex Remote f/Freedom HF Series Inverter/Chargers [808-1840]
Remote for Freedom HF Series Inverter/ChargersReplacement panel for Freedom HF Series inverter/chargers.*Does not include connection cable.Compatible With:Freedom HF Series inverter/chargersFeatures: View key system information Configure and monitor important parameters and settings Conveniently view fault and error codes Technical Specifications: Input Voltage: 12V AC Output: GFCI and/or Hardwire In the Box: Remote panel Instruction manual *Sold as an Individual
$42.35$41.50
Xantrex Remote On/Off Switch f/Freedom SW Series [808-9002]
On/Off Remote Control PanelXantrex On/Off Remote Control Panel is made specifically for Xantrex Freedom SW2012 and SW3012.Features: The Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter via the Remote port on the AC/DC side panel to turn the Freedom SW Inverter ON or OFF from a more convenient location The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter When this feature is enabled, the Freedom SW Inverter will shutdown if the vehicle's ignition is not engaged (not in ACC position) to prevent unnecessary battery drain Includes a 25 foot (7.6-m) communications cable Choose a location that is dry, free from corrosive or explosive fumes, and appropriate for installing an electronic device WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
$33.37$30.50
Xantrex Remote Panel w/25' Cable f/ProWatt SW Inverter [808-9001]
The Prowatt SW remote provides the convenience of a simple on/off remote function to the user. It also has an automatic ignition lockout feature to shut down the inverter's output when the vehicle's ignition or a 12 VDC enable is not engaged. A 25' remote cable is included with the remote panel.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
$33.37$30.50
Xantrex Solar Starter Cable Kit [708-0150]
Solar Starter Cable KitXantrex's Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery.Features: Designed to connect a PV array to a charge controller and battery Weather-resistant and certified cables PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller Battery cables have built-in fuse and ring terminals In the Box: (1) Pair of (black/red) 20-foot MC4-type PV cables (1) Pair of (black/red) 10-foot MC4-type battery cablesBuilt-in 30A DC ATC fuse on the red cable
$163.11$117.50
Xantrex Statpower Prosine 1800 GFCI 24V [806-1850]
Provides 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.Product Features 1800 watt inverters (2900 watt surge capability) True sine wave AC output (crystal controlled) Removable LCD display can be mounted remotely for control and monitoring Unique DC terminals offer 180-degree connections for easy installation in tight places Powersave mode draws only 1.5 watts under no load Two year warranty Protection Features Over temperature shutdown and automatic overload protection Over voltage and under voltage protection Short circuit and AC backfeed protection With less than 3% total harmonic distortion, Prosine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.Light and compactProsine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 2000w Inverter Input Voltage: 24v Waveform: True Sine Wave Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 7"H x 13"W x 19"L WT: 19 lbs UPC: 715535618506 Quick Guide (pdf)Owner's Manual (pdf)
$2,558.12$1,712.50
Xantrex Statpower Prosine 1800 GFCI [806-1800]
Provides 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.Product Features 1800 watt inverters (2900 watt surge capability) True sine wave AC output (crystal controlled) Removable LCD display can be mounted remotely for control and monitoring Unique DC terminals offer 180-degree connections for easy installation in tight places Powersave mode draws only 1.5 watts under no load Two year warranty Protection Features Over temperature shutdown and automatic overload protection Over voltage and under voltage protection Short circuit and AC backfeed protection With less than 3% total harmonic distortion, Prosine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.Light and compactProsine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 2000w Waveform: True Sine Wave Inverter Input Voltage: 12v Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 8"H x 14"W x 19"L WT: 19.4 lbs UPC: 715535618001 Owner's Manual (pdf)Brochure (pdf)
$2,278.24$1,591.50
Xantrex Statpower XPower Powerpack 1500 [802-1500]
Portable PowerpackXPower Powerpack 1500 is a portable power system that can supply up to 1500 watts of household electricity enough to run almost any electronic product or appliance you might connect to your wall outlet at home. XPower Powerpack 1500 consists of a battery pack that stores electrical energy, state-of-the-art electronics that convert 12 volts from the battery pack to household power, an AC power panel that contains two standard outlets, and a DC power panel that is used to run 12 volt products. These components are packaged into a rugged cart with a removable waist handle that allows XPower Powerpack 1500 to be wheeled from room-to-room or outdoors over rough terrain.XPower Powerpack 1500 is an excellent alternative to a generator no noise, no fumes, no fuel, and no moving parts. With the accessories provided, recharge XPower Powerpack 1500 using utility power from your wall outlet, from your vehicle, or from a solar panel.Features Powers AC products up to 1500 watts Easy to monitor, dual-outlet, AC panel Built-in 1500 watt inverter with protection features Industrial design Quick and easy to recharge One year warranty 115 volt AC Section AC output power (10 minutes) 1500 watts AC output power (continuous 1350 watts AC surge power (max) 3000 watts AC output voltage (nominal) 115 volts AC output frequency 60 +/- 4 Hz AC output waveform Modified sine wave Inverter no-load current 0.3 amps (battery drain with no load on inverter) 12 Volt DC Section Internal battery type Sealed lead acid, AGM Internal battery capacity 51 amp-hours Internal battery voltage (nominal) 12 VDC DC power socket (circuit breaker) 12 amps (automatic reset) Charging System AC charger bulk charging current (max) 5 amps Peak charging voltage (nominal) 14.4 volts Float charge voltage (nominal) 13.6 volts General Specifications Operating/Storage temperature 32°F - 104°F (0°C - 40°C) Inverter low battery alarm (nominal) 10.7 volts Inverter low batter shutdown (nominal) 10.0 volts WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: DC Connection Type: Cigarette Lighter GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 3000w Waveform: True Sine Wave AC Connection Type: Outlet Inverter Input Voltage: 12v Inverter Output Voltage: 120v Inverter Cont. Output Wattage: 1500w Box Dimensions: 16"H x 19"W x 19"L WT: 59.5 lbs UPC: 715535215002 Owner's Manual (pdf)Brochure (pdf)
$829.40$632.50
Xantrex Telephone to Network Cable Adapter [808-9010]
Telephone to Network Cable AdapterThe Freedom SW Remote Adapters (TEL to Xanbus cable) allow Xanbus-enabled devices to establish a Xanbus network using a 4 pin RJ11(a regular telephone cable) or a 6 pin RJ12 cable (a Xantrex remote cable) that comes supplied andinstalled in many recreational vehicles and in pleasure crafts. One cable is red and the other is black.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
$26.50
Xantrex TRUECHARGE2 60A Battery Charger - 12V [804-1260-02]
TRUECHARGE™2 60A Battery Charger - 12VNow with the PARALLEL STACKING FEATURE. This feature allows two chargers to work together to combine the output current, achieving up to 120A for large battery banks.In addition to meeting global safety and regulatory standards, TRUECharge2 battery chargers feature low electrical interference and efficient, power factor corrected multistage charging. TRUECharge2 battery chargers can be mounted in a variety of positions, given their drip-proof design. TRUECharge2 battery chargers enable quick installation with easy-to-access AC and DC wiring compartments.Auto-ranging AC input voltage capability (90-265 volts AC) makes traveling abroad and handling poor-quality power a breeze. The easy-to-read onboard display can be augmented with an optional remote panel.Features: 12V models available in 20A, 40A and 60A Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Settings for flooded, gel, AGM, or lead-calcium batteries Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources Temperature-compensated charging Power factor corrected for efficient charging Battery-equalization feature Ability to charge 'dead' batteries Battery temperature sensor available (Part #808-0232-01) Optional remote panel (#808-8040-00 for 60 A Charger, #808-8040-01 for 20 A & 40 A Chargers) Reverse battery polarity protection Drip-proof design Over- and under-temperature protection DC over-voltage protection Battery overcharging protection Specifications: 60 Amp 90-265 Vac / 47-63 Hz WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 60a Charging Banks: 3 Portable: No Charger Input - Voltage: 120v Charger Output Voltage: 12v Box Dimensions: 6"H x 11"W x 17"L WT: 9.6 lbs UPC: 715535909628 Quick Guide (pdf)Owner's Manual (pdf)
$1,013.84$494.50
Xantrex TRUEcharge3 10A 3 Bank Battery Charger - 24V [804-2410-10]
TRUEcharge™3 10A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 10 A Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4 Minimum Recommended Battery Bank Size: 20 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F) Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb) Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 10a Charger Output Voltage: 24v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 14"L WT: 5.95 lbs UPC: 715535920890 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
$616.78$393.50
Xantrex TRUEcharge3 20A 3 Bank Battery Charger - 12V [804-1220-10]
TRUEcharge™3 20A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 20 A Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4 Minimum Recommended Battery Bank Size: 40 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F) Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb) Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 14"L WT: 5.95 lbs UPC: 715535920777 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
$522.69$333.50
Xantrex TRUEcharge3 20A 3 Bank Battery Charger - 24V [804-2420-10]
TRUEcharge™3 20A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 20 A Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4 Minimum Recommended Battery Bank Size: 40 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F) Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb) Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 20a Charger Output Voltage: 24v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 13"L WT: 6.15 lbs UPC: 715535920937 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
$784.04$499.50