Anchoring & Docking - Windlasses

Cone and Washer Kit v/CPX and V Series Windlasses Replacement cones and washers for CPX and V series windlasses.Compatible With:CPX and V Series windlassesIn the Box: Cones x two (2) Washers x two (2)  Instruction manual  *Sold as an Indivudual

Read more less

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer. An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use. The RC6 is available only as a low profile unit (no optional capstan drum).Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 10"H x 15"W x 15"L WT: 25 lbs UPC: 1000000004816 Brochure (pdf)

Read more less

CapstansWhy Capstans?Rather than using the hand-over-hand method of retrieving lines, the capstan offers a mechanical advantage that is both faster and safer. The capstan does the heavy lifting with only a small amount of effort. The maximum speed of the line retrieval depends on the rotational speed of the drum. The benefit is that the retrieval speed can be adjusted by decreasing the tension on the retrieved line, maintaining control over a very heavy load with little effort.This useful device, which has been around since the early days of sailing, is still used today. Recreational fishermen, like commercial fishermen, use these for hauling crab and lobster pots and there are many other uses aboard boats. The few mechanical parts and ease of use have made this a favorite of fisherman worldwide. While chains should NEVER be wrapped around a drum, the majority of lines can be handled on a capstan.A capstan, typically operated by an easy to use footswitch (R001459), allows the boater to control lines with ease without having additional crew members. Powerwinch has a model to fit your needs. All Powerwinch capstans come with a foot control switch that allows for hands-free operation.Capstan 1000Multi-purpose rope winch for anchoring, sailing & Fishing1000 pounds of pulling power!Our largest capstan, the Capstan 1000, is a power assisted rope capstan for larger applications with 1000 pound pull power and 40 ft/minute retrieval speed. A great tool for quick retrieval lobster, prawn and crab pots. The Capstan 100 also provides power assist for limited crew sailboats and power assisted anchor retrieval. Uses up to 3/4" diameter rope. Fast 40'/min retrieval speed 1000 lb max pulling power Handles unlimited rope lengths Easy to operate footswitch (included) All aluminum housing with a durable polyester finish Thermal automatic resetting circuit breaker One piece, heat-treated and oil-impregnated gears Stainless steel internal shafts, fasteners, and hardware Two year limited warranty Specifications: Rope Diameter (Inches): 3/4" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 20.9 lbs UPC: 033936770990 Owner's Manual (pdf)

Read more less

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series Full disassembly capability of topworks utilising handle provided and an Allen key The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Full disassembly capability of the topworks utilising only the handle provided and an Allen key Manual override using the emergency crank handle provided Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel All RC Series windlasses are fitted with Maxwell's unique Wave Design™ chainwheel This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and MetricSpecifications Material: Marine-Grade 316 Stainless Steel Power: 12 Volt DC, 600 Watts Chain / Short Link: 1/4" ( 6mm / 7mm ) Maximum Pull: 770 lbs ( 350kg ) Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm) Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min) Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Freefall: Yes Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 17"W x 19"L WT: 31.8 lbs UPC: 1000000004847

Read more less

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.HRC8 Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation High efficiency spur gearbox incorporating a robust non-backwind mechanism High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch Emergency "free fall" function in the event of onboard power failure Revolutionary new chainwheel - see over Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle Specifications: Model: HRC8 Maximum Pull: 900lbs Chain Short Link: 5/16" Rope Size (Nylon): 9/16" Line Speed(Anchor Retrieval): 108'/min Power Supply(DC): 12V Motor Power: 600W Net Weight: 25lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 9/16" Vertical/Horizontal: Horizontal Box Dimensions: 10"H x 14"W x 15"L WT: 29 lbs UPC: 9414761104029 Brochure (pdf)

Read more less

DeckHand™ 40 20- to 40-pound anchor capacity (anchor not included). Pre-spooled with 100 feet of 800-lb test rope. Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in the rope becomes tight, rope is automatically released; lock the winch with the touch of a button. Universal davit can be mounted at base of DeckHand™ or in remote position on boat deck; stows anchor horizontally to eliminate anchor swing. Anchor shackle allows for easy changeover from anchor to anchor. Stow and deploy switch integrated into the base of the unit. Corded remote stow and deploy switch (sold separately) allows operation of DH-40 from anywhere on the boat. Compatible with MKA-16-02 quick release bracket ideal for easy removal for boat cover clearance or clearing the deck during non-use (requires holes to be drilled in top plate of quick release bracket). 12-volt battery operation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 12"H x 14"W x 17"L WT: 24 lbs UPC: 029402017843 Owner's Manual (pdf)

Read more less

V1 Fast Fit Motor Gearbox Assembly - 12 VReplacement motor/gearbox assembly for V1 - 12 V windlasses.Compatible With: V1 windlasses*Sold as an Individual 

Read more less

Pro-Series Horizontal 700 Windlass - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system. Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Instruction manual *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .50 Vertical/Horizontal: Horizontal Box Dimensions: 4"H x 4"W x 18"L WT: 20 lbs UPC: 743683306495 Owner's Manual (pdf)

Read more less

DeckHand™ 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features 25-lb anchor capacity (anchor not included) Pre-spooled with 60 feet of 800-lb test nylon rope Davit can be mounted at base of DeckHand or in remote position on deck Davit stows most kinds of anchors Stow and deploy switch integrated into the base of the unit Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35) Includes: remote mountable anchor davit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs UPC: 029402027897 Owner's Manual (pdf)

Read more less

RC10 Automatic Rope/Chain Windlass Designed for 3/8" chain and 5/8" rope combination Maximum Pull: 1870lbs. Metric chain size: 10mm Motor Wattage: 1200W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass. Manufactured from marine grade chromed bronze for long term durability The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required! A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck. Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Vertical Box Dimensions: 12"H x 17"W x 20"L WT: 47 lbs UPC: 1000000004151 Quick Guide (pdf)Brochure (pdf)

Read more less

V700 Vertical Windlass - 12V (Windlass only)With 100%  316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive and durable windlasses on the market.  It works at the push of a button and has two built-in features that make it unique - motor protection and anchor lock. The V700 comes with a gypsy able to accept 1/4 inch chains.*Does not include contactor or circuit breaker.  Windlass ONLY. Features: For rope, chain, or combination rodes  Built-in motor protection and fail-safe anchor lock Easy installation Fast line speed Manual recovery option Impact-resistant cover Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 35' Mounting Position - Vertical Weight - 14lbs In the Box: Windlass Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Vertical Box Dimensions: 6"H x 8"W x 15"L WT: 20 lbs UPC: 743683303036 Owner's Manual (pdf)

Read more less

Pro-Sport 550G Horizontal Windlass Kit - 12VLewmar’s Pro-Sport windlass is designed as an economical package for rope and chain applications, without compromise on quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice.  Complete with push-button control, anchoring has never been easier. Features: Low power consumption / current draw Dual direction powered operation Convenient above-deck installation Manual freefall DIY ready Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 150 Watt Maximum pulling power - 550lb (250kg) Maximum Working Load - 137lb (62.12kg) For boats up to 28' (9M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Contactor Rocker switch Instruction manual  *Sold as an Individual Owner's Manual (pdf)

Read more less