DeckHand 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features
25-lb anchor capacity (anchor not included)
Pre-spooled with 60 feet of 800-lb test nylon rope
Davit can be mounted at base of DeckHand or in remote position on deck
Davit stows most kinds of anchors
Stow and deploy switch integrated into the base of the unit
Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button
Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35)
Includes: remote mountable anchor davit
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Rope Diameter (Inches): 3/16"
Vertical/Horizontal: Horizontal
Freefall: No
Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs
UPC: 029402027897
Owner's Manual (pdf)
Class 36'Automatic Helm-Operated Free-Fall WindlassThe Safest Way to Anchor!
Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
Built with durable stainless steel fasteners - Resists corrosion for easy removal
Watertight seals - For additional protection against corrosion
One piece motor plate - For smooth power transmission & improved gear life
Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
Stainless steel drive shafts - For years of smooth, reliable performance
Replaceable Rode-Glide - Smoothly channels rope and chain below deck
Use tapered back splice - For smooth rope-to-chain transition
Specifications:
Freefall: Yes
Rope Diameter (Inches): 1/2"
Vertical/Horizontal: Horizontal
Box Dimensions: 9"H x 11"W x 16"L WT: 18.6 lbs
UPC: 033936777364
Owner's Manual (pdf)
G-6 Twin Eye Fender 11" x 30" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 30" (27.9 x 76.2cm)
Eye Diameter - .875" (2.2cm)
Circumference - 34.6" (87.8cm)
Volume - 8.5 gallons (32.2L)
Boat Size - 35' - 40' (10.7 - 12.2M)
Weight - 6.7lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: Black
Height: 30"
Width: 11"
Box Dimensions: 1"H x 3"W x 6"L WT: 6.65 lbs
Brochure (pdf)
Stainless Steel Open Base Cleat - 8"The Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH thru-bolts (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Size: 8"
Construction: Stainless Steel
Finish: Polished
Box Dimensions: 2"H x 4"W x 12"L WT: 0.7 lbs
UPC: 035514041027
Elite Fender Cover for G-5, HTM-2, F2 and NF-5 Fenders - BlackFender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With:
G-5 Fenders
HTM-2 Fenders
F-2 Fenders
NF-5 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual Specifications:
Color: Black
Box Dimensions: 1"H x 9"W x 14"L WT: 0.7 lbs
UPC: 743952008037
Brochure (pdf)
HTM-3 Fender 10.5" x 27" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: White
Height: 27"
Width: 10.5"
Box Dimensions: 1"H x 3"W x 6"L WT: 7.4 lbs
Brochure (pdf)
REMOTE UP/DOWN CONTROLEasy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids.
Manufactured from marine-grade materials.
Splash proof.
Suitable for use with DC 12V or 24V dual-directional solenoids.
Quick Guide (pdf)Brochure (pdf)
Nylon Fendermate™ Fendermate™ is the latest in fender brackets. Clamps securely on both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire. Unique double locking action locks the clamp on the rail or wire while still allowing full adjustment of the height of the fender. When the proper height is reached, the final locking action clamps the rope quickly and securely. Constructed of marine grade reinforced injection molded nylon. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Open Base Cleat - Flat Head - 10" - Die Cast AluminumThese Flat Head Open Base Cleats feature a large base to distribute loads evenly. Designed for use on aluminum docks, vessels, or other aluminum surfaces. Constructed of die-cast aluminum. Installs with two FH fasteners (not included).Specifications:Fastener: 5/16" FH Specifications:
Construction: Aluminum
Finish: Silver
Size: 10"
Box Dimensions: 1"H x 2"W x 10"L WT: 0.4 lbs
True Fit 2 Fender Holder Kit - 12" Diameter Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.The modular system fits rails from 7/8" to 1" at any height or angle. Because of its modular design, you can add on additional fender holders as your needs change. Compatible With:F-5 Fenders, G-6 Fenders, NF-5 and HTM-3 FendersFeatures:
A versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Technical Specifications:
Made from 304 Stainless Steel wire
Dimension (individual Fender Holder) Inside Diameter - 12"
Dimension (individual Fender Holder) Length - 25"
Weight (kit) - 3.7 lbs
In the Box:
Two (2) TFR-280 Holders
Three (3) TFR-402 Swivel connectors (7/8" - 1" Rail)
Two (2) TFR-403 Parallel connectors
*Sold as a Kit
Folding Ladder - 5 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Step Count: 5 Step
Construction: Plastic
Box Dimensions: 4"H x 9"W x 14"L WT: 2.5 lbs
UPC: 035514582094
13.5" CM Mooring Buoy w/Galvanized Iron - White Blue StripeThe CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring. With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide). The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide. Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual Specifications:
Color: White
Diameter (Inches): 13.5"
Box Dimensions: 8"H x 8"W x 32"L WT: 11.8 lbs
UPC: 743952007061