HTM-2 Fender 8.5" x 20.5" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 26.7" (67.9cm)
Volume - 4.7 gallons (17.8L)
Boat Size - 25' - 30' (7.6 - 9.1M)
Weight - 4.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: White
Height: 20.5"
Width: 8.5"
Box Dimensions: 1"H x 3"W x 6"L WT: 5.05 lbs
Brochure (pdf)
HTM-3 Fender 10.5" x 27" - GraphiteIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 33" (83.8cm)
Volume - 9.2 gallons (34.8L)
Boat Size - 30' - 40' (9.1 - 12.2M)
Weight - 7.7lb
*Sold as an Individual Specifications:
Color: Graphite
Height: 27"
Width: 10.5"
Box Dimensions: 8"H x 8"W x 25"L WT: 7 lbs
UPC: 743952032032
Brochure (pdf)
Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures:
1000 Watt 12 Volt Replacement Windlass Motor
Designed for Maxwell 800 / 1000 windlasses
4 hole flange motor replaces the 1000 Watt 12 volt P11112 2 hole flange motor
Maxwell has made a change to the mounting flange of CIMA series-wound motors
The change consists of adding a second set of mounting holes which allows the motor to be mounted 90? from the original orientation
Replaces Maxwell P11112
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Motor Cima - 1200W - 24V - 4-Hole Flange
24V
1200W DC
3500RPM
IP66
Diameter: 114 x 181mm
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
G-2 Twin Eye Fender 4.5" x 15.5" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm)
Eye Diameter - .5" (1.3cm)
Circumference - 14.1" (35.9cm)
Volume - .7 gallons (2.6L)
Boat Size - 10' - 15' (3 - 4.6M)
Weight - 1.4lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: Sand
Height: 15.5"
Width: 4.5
Box Dimensions: 1"H x 3"W x 6"L WT: 1.5 lbs
Brochure (pdf)
G-1 Twin Eye Fender 3.5" x 12.8" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Hangs vertically or horizontally
Unique Polyform valve for years of service
Technical Specifications:
Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm)
Eye Diameter - 0.375" (1 cm)
Circumference - 11" (27.9 cm)
Volume - 0.4 gallons (1.5 L)
Boat Size - Up to 10' (3 M)
Weight - .7 lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: Sand
Height: 12.8"
Width: 3.5"
Box Dimensions: 1"H x 3"W x 6"L WT: 0.8 lbs
Brochure (pdf)
18" Smooth Rolling Wheel Offers substantial dock cushioning and features molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind andcurrent conditions.Integrally molded ribs both top and bottom of these wheels makes them valuable dock and boat protection and formidable guards against impacts. Specifications:
Color: White
Box Dimensions: 11"H x 18"W x 20"L WT: 19.1 lbs
UPC: 776113950777
Owner's Manual (pdf)
Dock Edge Postlite Solar LED Post Light 2PK
Powerful solar charging performance
6 possible colors to choose from
Change colors with a flip of a switch
Easy twist-on lid with large rubber seal
360 Degree lenticular light diffusing lens and domed reflector maximize light output
Installs easily with no wires
Universal fittings for 1-5/8", 1-7/8", 2-3/8", Brock Post and 3-1/4" ID posts, universal flat surfaces
Product Specifications:
Part No.: 96-258-F
Description: PostLite, Solar, LED White, (2pk)
Owner's Manual (pdf)
HTM-1 Fender 6.3" x 15.5" - Blue with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: Blue
Height: 15.5"
Width: 6.3"
Box Dimensions: 1"H x 3"W x 6"L WT: 2.7 lbs
Brochure (pdf)
G-3 Twin Eye Fender 5.5" x 19" - White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 5.5" x 19" (14 x 48.3cm)
Eye Diameter - .625" (1.6cm)
Circumference - 17.3" (43.9cm)
Volume - 1.4 gallons (5.3L)
Boat Size - 15' - 20' (4.6 - 6.1M)
Weight - 1.9lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit Specifications:
Color: White
Height: 19"
Width: 5.5"
Box Dimensions: 1"H x 3"W x 6"L WT: 2.1 lbs
Brochure (pdf)