Anchoring & Docking

A-3 Buoy 17" Diameter - WhiteThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 17" x 23" (43.2 x 58.4cm) Eye Diameter - 1.125" (2.9cm) Circumference - 53.4" (135cm) Volume - 14.5 gallons (54.9L) Boat Size - 40' - 50' (12.2 - 15.2M) *Sold as an Individual Specifications: Color: White Diameter (Inches): 17" Box Dimensions: 8"H x 18"W x 23"L WT: 6.8 lbs Brochure (pdf)

Read more less

A6 - 34" x 46-1/2" - Double Layer - BlackThe A-Series are double layered making them softer, more durable & reversible.Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Black Box Dimensions: 4"H x 14"W x 15"L WT: 4 lbs UPC: 817382010479

Read more less

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.Kit Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Clutch Release Handle Features The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope. The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope. The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck Case Material: Anodized Aluminum The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck,routine maintenance. Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up. The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain). The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. High quality Stainless Steel chainwheels The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system. The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required. The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. Exclusive Maxwell 3 YEAR Limited Warranty Specifications Maximum PUll: 1540 lbs Chain Short Link: 5/16" or 8mm Chain Speed (Anchor Retrieval): 79 ft per Minute Rope Speed (Anchor Retrieval): 65 ft per Minute Rope Size (Nylon 3 strand or 8 Plait): 5/8" Power Supply (DC): 12VDC Motor Power: 1000 Watts Net weight: 42 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 17"W x 19"L WT: 56 lbs UPC: 1000000002683

Read more less

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs UPC: 1000000002638 Brochure (pdf)

Read more less

Generation 3 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 3 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

LFX-10 Anchor - Anodized Aluminum - 10lbThe new LFX anchor has been developed to complement our existing range, offering style with practicality.  Made from high-grade anodised aluminium, the LFX anchor demonstrates exceptional anti-corrosion performance with enhanced aesthetics. The large flukes perform superbly under high loads while being extremely lightweight, making the LFX easy to handle and use.  The anchor has the additional feature of being simple to disassemble and store in a locker. Features: Made from lightweight and strong, high-grade aluminium alloy Tough, durable and corrosion-resistant anodised finish  Performs at its best in mud and sand environments  Super high holding power Adjustable fluke angle for different conditions  Easily detachable for locker storage Technical Specifications: Material - Anodized Aluminum  Weight - 10lb (4.5 kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 10 Box Dimensions: 4"H x 7"W x 32"L WT: 11.1 lbs UPC: 743683181726 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Quick Draw Fender AdjusterFeatures: Tightly holds to bow rails, grab rails, lifelines, cleats, and more! Instantly adjust the height of your fender with a push of a button Stainless steel screws and internal spring Fits 1/4" - 1/2" fender lines Two Quick Draw Hangers can be used together to horizontally hang a Big B, Storm Gard, or Hull Gard fender. 

Read more less

12' King Pin Anchor Pole - 2-Piece - WhitePanther KPP120W King Pin Anchor Pole comes as a 2 Piece with a length of 12' and color white. 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4" diameter, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8', single-piece pole also available.)Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4" diameter, high-impact fiberglass Equipped with molded foam grips

Read more less

Fender Holder w/Adjuster - WhiteTough and durable PVC mounting strap snaps over railings, lifelines or stanchions. Allows fender lines to be adjusted to length in a matter of seconds.

Read more less

Dock Edge Standard "D" PVC Profile 16ft Roll - WhiteThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide. Packaged in easy to use rolls for fewer joints.Product Specifications: Part No.: 1190-F Description: "D" Profile, (16 Ft/Roll), White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 4"H x 23"W x 23"L WT: 10.6 lbs UPC: 776113119006

Read more less

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44lb. AnchorsStainless Steel Jaw Jaw Swivel

Read more less

Anchor Kit797 50' Premium Nylon Line 1.5lb Folding Anchor Watertight Buoyant Container - doubles as a bailer Nylon Snap Hook, for easy attachment to vessel For still water use. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less