Anchoring & Docking

DeckHand PontoonManufacturer item #1810141For pontoons, this DeckHand gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. Automatically raise and lower your anchor at the touch of a button. DeckHand 40 has a 40-lb anchor capacity (anchor not included) and is pre-spooled with 100 feet of 800-lb test nylon rope. Universal davit can be mounted at base of DeckHand or in remote position on boat deck. Davit also stows anchor horizontally to eliminate anchor swing. Anchor shackle allows for quick changes between anchors. A special anti-drag system senses the bottom to allow for controlled drifting. Runs on 12-volt battery (not included).Includes: Standard DeckHand 40 anchor winch MKA-16-02 Quick Release Bracket Corded Remote Accessory (DH-40) MKR-12 quick connect plug WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Freefall: No Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 14"W x 17"L WT: 30.8 lbs UPC: 029402027880 Owner's Manual (pdf)

Read more less

FootswitchSafety cover prevents accidental operation.

Read more less

FX-23 - Mud Palm Set - Pair Original replacement mud palms for the FX-23 anchor.Includes mounting hardware.*Sold as a Pair

Read more less

1/2" Double Braid Dock Line - White - 35'Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking.Applications: Dock line - ≤40' (12.2 M) vessel Mooring line - ≤ 20' (6.1 M) vessel  Technical Specifications: Color - White Material -  Double braid nylon  Rope Diameter - 1/2" (12mm) Rope Length - 35' (10.7 M) Tensile Strength - 8,000 lb *Sold as an Individual Specifications: Rope Type: Braided Nylon Tracer: No Color: White Length (Feet): 35' Rope Diameter (Inches): 1/2" Box Dimensions: 5"H x 6"W x 8"L WT: 3 lbs UPC: 753963153848 Brochure (pdf)

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove NOTE:Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Quick Guide (pdf)Brochure (pdf)

Read more less

EZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. NOTE:Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Quick Guide (pdf)Brochure (pdf)

Read more less

Fender Holder w/Adjuster - WhiteTough and durable PVC mounting strap snaps over railings, lifelines or stanchions. Allows fender lines to be adjusted to length in a matter of seconds.

Read more less

Fender 'TOON Accessory KitDock Edge's Fender 'TOON Accessory Kit

Read more less

5/8" Double Braid Dock Line - White/Gold with Tracer - 25'Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking.The Double Braided White/Gold with tracer makes for the perfect anchor line.   Applications: Dock line - ≤55' (19.8 M) vessel Anchor line - ≤ 40' (13.7 M) vessel Mooring line - ≤ 30' (10.7 M) vessel  Technical Specifications: Color - White/Gold with tracer Material -  Double braid nylon  Rope Diameter - 5/8" (16mm) Rope Length - 25' (7.6 M) Tensile Strength - 13,100 lb *Sold as an Individual Specifications: Tracer: Yes Rope Type: Braided Nylon Color: White/Gold Length (Feet): 25' Rope Diameter (Inches): 5/8" Box Dimensions: 6"H x 6"W x 8"L WT: 3.2 lbs UPC: 753963153787 Brochure (pdf)

Read more less

Dock Bumper Corner Dock Guard - BlackThe black roto-molded bumper is fabricated from soft vinyl with UV inhibitors and Fungicides and has angled ends to deflect Craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications. Specifications: Color: Black Box Dimensions: 5"H x 12"W x 12"L WT: 1.4 lbs UPC: 776113731048

Read more less

MOORING ARMS4 Feet in length for watercrafts from PWCs to mid-sized cruisers.An economical alternative or enhancement to bumpers and dock bumper profiles, these Mooring Arms retain your watercraft a safe and convenient distance from the dock face to minimize the possibility of damage from wind, wake and waves. These easy-to-install mooring arms apply vector based forces to the bow and stern of the watercraft allowing it to freely and effortlessly follow wave and water action such as tidal fluctuations, yet securely keep the craft at arms length from the dock surface. Manufactured from the same durable Cross-wound fiberglass as our DockEdge and Howell mooring whips with polyethylene tie-retainers and stainless steel hardware. Hot-Dipped Galvanized cleats, mooring lines and DockEdge Quality craftsmanship is included in every Mooring Arm kit. Specifications: Length: 4' Box Dimensions: 6"H x 6"W x 49"L WT: 10 lbs UPC: 776113303405 Owner's Manual (pdf)

Read more less

Dock Edge Postlite Solar LED Post Light 2PK Powerful solar charging performance 6 possible colors to choose from Change colors with a flip of a switch Easy twist-on lid with large rubber seal 360 Degree lenticular light diffusing lens and domed reflector maximize light output Installs easily with no wires Universal fittings for 1-5/8", 1-7/8", 2-3/8", Brock Post and 3-1/4" ID posts, universal flat surfaces Product Specifications: Part No.: 96-258-F Description: PostLite, Solar, LED White, (2pk) Owner's Manual (pdf)

Read more less