Anchoring & Docking

Smart Cleat 6" Stud Mount Investment Cast 316 Stainless SteelThe Stud Mount Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. The stud mounted fasteners are hidden, leaving no exposed fasteners to collect water or debris. Studs are 1/4"-20 x 1-1/2". Installation is easy with two standard bit size holes drilled for the studs (no cutouts or hole saws required). Includes stainless steel washers and nuts. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Finish: Polished Size: 6" Construction: Stainless Steel Box Dimensions: 1"H x 6"W x 11"L WT: 0.7 lbs UPC: 035514041768

Read more less

DeckHand™ 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features 25-lb anchor capacity (anchor not included) Pre-spooled with 60 feet of 800-lb test nylon rope Davit can be mounted at base of DeckHand or in remote position on deck Davit stows most kinds of anchors Stow and deploy switch integrated into the base of the unit Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35) Includes: remote mountable anchor davit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs UPC: 029402027897 Owner's Manual (pdf)

Read more less

Rope Protector Black for Lines 1/2" & GreaterSpiroll rope protectors employ a unique patent-pending technology whereby the device’s rugged polyurethane material wraps snugly around a rope several times to secure itself in place. Application takes less than 20 seconds.Features: Made in the USA Self-wraps around rope for a snug fit (no need to tie off) Extends a rope's life  Protects fixed ropes from abrasion and sharp edges Easy to remove/replace Can be stored on a coiled rope Constructed from advanced elastomeric polymer for maximum durability Specifications: Rope Protector Length: 24” Color: Black Material: Polyurethane

Read more less

Chafe Guard Orange for Lines up to 3/4"-1" DiameterBuilt from rugged and durable polyurethane, this rope protector has a patented technology that allows it to automatically wrap itself around a rope and provide long-term chafe protection.Features: Made in the USA Rugged polyurethane stands up to chafe and abrasion Self-wraps around the line several times for a snug and firm fit Resists rot, grime, and UV longer than other chafe gear Will not streak Removable Fast & easy to apply Specifications: Chafe Guard Size: 23.50″ Long x 9″ wide (unrolled) Fits Lines Up To: 3/4”-1” Weight: 6 oz Color: Orange Material: Polyurethane Ultimate Tensile Strength: 10,000 PSI Ultimate Elongation: 450% Vicat Softening Point: 92 Degrees C

Read more less

Chafe Guard Black for Lines up to 3/4"-1" DiameterBuilt from rugged and durable polyurethane, this rope protector has a patented technology that allows it to automatically wrap itself around a rope and provide long-term chafe protection.Features: Made in the USA Rugged polyurethane stands up to chafe and abrasion Self-wraps around the line several times for a snug and firm fit Resists rot, grime, and UV longer than other chafe gear Will not streak Removable Fast & easy to apply Specifications: Chafe Guard Size: 23.50″ Long x 9″ wide (unrolled) Fits Lines Up To: 3/4”-1” Weight: 6 oz Color: Black Material: Polyurethane Ultimate Tensile Strength: 10,000 PSI Ultimate Elongation: 450% Vicat Softening Point: 92 Degrees C

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Pro-Series Bearings Kit - 2nd GenerationBearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar Pro-Series and Pro-Fish windlasses - Generation 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual 

Read more less

Pro Series Seals, Dowels & Screws Kit Seals, Dowels, and Screws Kit for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Dowel 1/4" x 1 1/4" x three (3) Dowel, 6 x 30 mm x one (1) Dowel, 8 x 45 mm x one (1)  Socket HD cap screw 10-24UNC x 1 1/4" x six (6) Wiper seal x two (2) *Sold as an Individual 

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less

Dock Bumper Straight Dock Guard - 18" - BlackFabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications. Specifications: Color: Black Box Dimensions: 3"H x 5"W x 17"L WT: 0.54 lbs UPC: 776113731079

Read more less

Torpedo Bumper - 18" - BlackThese large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from the same quality material as our Dolphin™ fenders, each weighs a rugged 2.7 lb. and measures 18" tall with a diameter of 5". Place them on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts.WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 6"H x 6"W x 18"L WT: 3 lbs UPC: 057389911182

Read more less

Elite Fender Cover for HTM-4 Fenders - BlackFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet.  The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split.  This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With:HTM-4 FendersFeatures: Hand-crafted with heavy-duty polyester fabric for durability Sun resistant, abrasion-resistant and water-resistant Washable Custom-fit for a tailored look A tough 1/4" line drawstring closure Quick and easy installation *Sold as an Individual Specifications: Color: Black Box Dimensions: 1"H x 8"W x 13"L WT: 1.5 lbs UPC: 743952008075 Brochure (pdf)

Read more less