Boat Outfitting - Accessories

Non-Tipping 20oz Tumbler – TealThe Toadfish Non-Tipping 20oz Tumbler is made from high-grade stainless steel and is double-wall vacuum insulated to keep your drink icy cold or hot to the last sip. Featuring the SmartGrip suction technology, this tumbler will keep your drink upright and mess-free, along with being hard to tip but easy to lift.  Every tumbler comes with Toadfish's shatterproof lid, keeping you on the go without worrying about spilling your drink. Toadfish Model Number: TFNOTIP20OZTUM-TEALFeatures: Color: Teal SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant. Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use, simply place the Tumbler on any smooth surface, and it will keep your drink in place (securely upright) To remove, lift directly up This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Hatch Lift Assembly Regal OEM 750 DT - 12VLenco's custom Regal hatch lift is used to replace the existing one.Specifications: Voltage: 12V OEM 750 DT

Read more less

Stainless Steel Flagpole Hole Mount Pennant Clips - Set of 4 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 2"W x 6"L WT: 0.05 lbs UPC: 035514328555

Read more less

A.C.E. Transducer EpoxyThe perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull is perfect every time. The Vexilar A.C.E. transducer adhesive works extremely well for mounting all types of transducers. Everything you need is in the package, including a pre-sized two-part system of the epoxy, a Scotch-Brite pad for surface preparation, and an alcohol wipe to clean the area. Complete instructions are on the back of the card. The package contains enough to do one transducer installation. Vexilar's A.C.E. is the right material for your fiberglass or aluminum in-hull transducer installation.Features: Specially design adhesive for best sound conduction Super strong and long lasting hold Made in the USA WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T5 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.Mounting hardware included*The NE option has NO ELECTRONICS to be used with a Trollmaster.  Please see item 550503 for Electro Steer with Electronics.

Read more less

Mercury Mariner 9.9, 15 (1990-2004) & Yamaha 9.9, 15 (1990-2006)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

 Power Pole Cover f/Pro Series & Sportsman 8' Models OnlyPower Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.

Read more less

Yamaha 6, T8 (All Years) & 9.9 (2008-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP, and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Tac Free Protective Topcoat - 12ozTac Free is a flexible satin top coat used to eliminate plasticizer migration on coated surfaces.   Features: Eliminates tackiness on refinished vinyl Wet on wet application saves time Protective coating Resistant to alcohol based cleaners Applications:Vinyl previously coated with Color Coat, Classic Coat or Vinyl Coat Quick Guide (pdf)

Read more less

Swim Platform Outboard Motor BracketBuilt extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP.Features: Adjustable outboard motor bracket designed to mount on most swim platforms Rated for 2- and 4- stroke motors up to 20HP Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance Comes complete with a transom support bar for weight support and torque resistance Do NOT use without Panther 55-0415 safety cable – included

Read more less

Carbon Fiber Flag Pole with J-Lock System - 26"Take your marine flag display to the next level with the Easy n’ Secure Fit Carbon Fiber Flagpole. Built for today’s boater, these flagpoles pair ultralight durability with high-strength carbon fiber construction, delivering exceptional performance without added weight. Featuring our patented twist-and-lock technology, they install effortlessly into existing hardware and stay firmly in place— no rattle, no fuss. The result is a clean, premium presentation that enhances vessels of any size.Features: Fits 12” x 24” flags Patented twist-and-lock system for quick, secure install/removal Lightweight Carbon Fiber material with clear, Awl Grip UV-protection Corrosion-resistant hardware, built for harsh saltwater conditions 360° tangle-free swivel keeps flags flying freely Fits standard 1-5/8” rod holders and gunwale mounts Rattle-free fit with precision tapered wedges (including 30° wedge) Stable and secure, even at cruising speeds Versatile mounting options Brochure (pdf)

Read more less

Tele-Sun Aluminum Shade Poles with Carry BagExtend your time on the water and at the sandbar with the new Aluminum Tele-Sun Shade Poles! Made from a strong, lightweight drawn aluminum tube, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles, and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 44.6” to 69.37” tall.Features: Lightweight drawn and anodized aluminum tube material  Built to withstand the harsh marine environments  Easy installation on deck-mounted rod holders with a 1/4” pin  The nylon cleat allows for easy adjustment of line tension  The tip ring feature provides for an alternative fabric clamping bungee cord system  Extends from 44.6” to 69.37”  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material *Comes as a pair Brochure (pdf)

Read more less