Boat Outfitting - Accessories

Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the  port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010626

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

Universal T-Top Center Console Cover - BlueThis trailerable T-Top Console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the deck) of 18' or less. All console covers measure 48"W x 60"L x 66"H.Features: Adjustable straps allow the cover to conform to most console configurations Boats with smaller consoles and T-Tops can also cover and protect the helm seats Heavy duty marine grade zipper allows easy installation and removal Specifications: Type: Covers Box Dimensions: 7"H x 9"W x 16"L WT: 7.4 lbs UPC: 040011714541

Read more less

Yamaha High Thrust Large Power Head 9.9, 15 (2005)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Code Flag "Q" 12" x 18"All flags measure 12" x 18" with brass grommets.Single sided screen printed on vibrant bright nylon colors. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 040011949516

Read more less

Universal T-Top Center Console Cover - GreyThis trailerable T-Top Console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the deck) of 18' or less. All console covers measure 48"W x 60"L x 66"H.Features: Adjustable straps allow the cover to conform to most console configurations Boats with smaller consoles and T-Tops can also cover and protect the helm seats Heavy duty marine grade zipper allows easy installation and removal Specifications: Type: Covers Box Dimensions: 7"H x 9"W x 16"L WT: 7.6 lbs UPC: 040011714558

Read more less

Tele-Sun Aluminum Shade Poles with Carry BagExtend your time on the water and at the sandbar with the new Aluminum Tele-Sun Shade Poles! Made from a strong, lightweight drawn aluminum tube, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles, and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 44.6” to 69.37” tall.Features: Lightweight drawn and anodized aluminum tube material  Built to withstand the harsh marine environments  Easy installation to deck-mounted rod holders with 1/4” pin  The nylon cleat allows for easy adjustment of line tension  The tip ring feature provides for an alternative fabric clamping bungee cord system  Extends from 44.6” to 69.37”  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material *Comes as a pair Brochure (pdf)

Read more less

Adjustable Heavy-Duty Transom Saver - 24"-36"Protect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during trailering.Features: Support the cantilevered weight of the motor Stabilize engine and steering mechanism when trailering The Attwood Difference:Tough components - You'll get long life from our adjustable toggles with replaceable rubber pads

Read more less

Flex TrimLength: 25'"A": 3/8""B": 5/8"Color: WhiteTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom Mounting Hardware KitBuilt tough for serious anglers, Power-Pole's transom mounting hardware kit makes direct-to-transom mounting simple and reliable. Designed for all Power-Pole shallow water anchor models, the kit comes with bolts, washers, and nuts—engineered to handle the demands of life on the water.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 7"L WT: 0.5 lbs Owner's Manual (pdf)

Read more less

10' Black Stern Flex Hose with Transom FlangeThis Trident Stern Flex Hose is black (Trident Marine 129 series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142-2000.Features: Highly resistant to crushing, abrasion, and UV and has good resistance to chemicals  Extraordinary flexibility Construction: Hose: Lightweight polyethylene copolymer Reinforcement: Integral Polyethylene Helix Temperature Range: -40°F to 140°F (-40ºC to 60ºC) Specifications: Color: Black Inner Diameter: (inch) 2” / (mm) 50.8 Outer Diameter: (inch) 2.35” / (mm) 60 Bend Radius: (inch) 3.5” / (mm) 88.9 Weight: (lb/100 ft.) 26 / (kg/m) 11.8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Mercury 15, 20 EFI Remote Throttle/Tiller (2018-Present) & Tohatsu 9.9, 15, 20 EFI Remote Throttle/Tiller (2018+)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less