Boat Outfitting - Gauge Accessories

Type E Plastic Bulb SocketFeatures: Material - Plastic Class - Type E Connection - Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 1"H x 5"W x 7"L WT: 0.5 lbs UPC: 754059017082

Read more less

NMEA 2000® Male Terminator Standard NMEA 2000® Male Terminator to be used with CAN BUS, Acqualink and OceanLink Gauges and Equipment.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Water Temperature Sensor - M16x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M16x1.5 Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/2"-14NPT Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Engine Oil Temperature Sensor - M14x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M14x1.5 Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Reed Switch Fuel Sender - 230 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 9.2" (230mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064512

Read more less

Reed Switch Fuel Sender - 600 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 23.6" (600mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064468

Read more less

Fresh Water Level Sensor (Resistive) with Adjust Lever & Seal Kit #750 - 12/24V - 200-600mm LengthFresh Water Level Sensor (resistive) with adjustable lever, sealing kit N05-008-750. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

52MM (2-1/16") Gauge SpinlockFeatures: Spinlock nut for 52MM ( 2-1/16") gauges Color - White *Sold as a singleThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Box Dimensions: 2"H x 3"W x 7"L WT: 0.1 lbs UPC: 7640178726819

Read more less

Light Diffuser for Type D Peanut Bulb - Red - 4 PackFeatures: Red in color Application - Type D Peanut Bulbs *Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 754059005980

Read more less