Boat Outfitting - Gauges
VDO SingleViu 100mm (4") Tachometer - 2500 RPM [A2C3832820030]
SingleViu 100mm (4") Tachometer - 2500 RPMSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.Features: 0-400kHz Default Input RGB LED Illumination (default illumination set to White) Water Resistant Front & Rear Includes Wire Harness Voltage 12-24V Molex MX 150 8 and 12 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Tachometer Gauge Size: 100mm Box Set: No Box Dimensions: 4"H x 8"W x 8"L WT: 1.1 lbs UPC: 4103590683373 Owner's Manual (pdf)
$269.99$187.50
Veratron LinkUp - Pyrometer Kit [B00042301]
LinkUp - Pyrometer KitThe system includes a Veratron LinkUp Gateway Module that enables the Pyrometer Sensor to be connected to and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement. Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play. Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.*Includes sensor and Link Up Gateway.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: LinkUp Gauge Type: Pyrometer Gauge Size: N/A Voltage - Input Range (Volts): 12v Box Set: No Box Dimensions: 4"H x 4"W x 16"L WT: 1.4 lbs UPC: 7640178729506 Owner's Manual (pdf)Brochure (pdf)
$448.70$403.83
Veratron Professional 85MM (3-3/8") Rudder Angle Indicator f/NMEA 0183 [B00067401]
Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication.It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class.Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it.The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration.Features: Designed for NMEA 0183 Easy programing and installation Technical Specifications: Operating Voltage - 8 to 32 V Protection Class - IP6K7 Illumination - Red LED Dial - Black w/graphics Pointer - Red Illuminated Lens - Plastic Double Lens (anti-reflective) Operating Temp. - -40°C to 115°C Connector - Molex MX150 - 12 pin In the Box: Gauge Wire Harness Mounting Spinlock Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 8-32v Series: OceanLink Gauge Type: Rudder Angle Gauge Size: 3-3/8" Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 0.65 lbs UPC: 7640178729452
$315.00$283.50
Veratron 52MM (2-1/16") ViewLine Transmission Oil Pressure 30 Bar/435 PSI - Black Dial Round Bezel [A2C59514141]
52MM (2-1/16") ViewLine Transmission Oil Pressure 30 Bar/435 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug Red LED Via Plus And Min Warning Light Operating voltage 8–32 V Input signal: standard Ω values Optional make-point switch can be connected Reverse polarity protection Anti-fog double lens Front side protection rating IP67 52 mm installation diameter 50 mm installation depth In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Oil Pressure Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.35 lbs UPC: 7640178723009 Owner's Manual (pdf)
$85.00$76.50
Veratron 52MM (2-1/16") ViewLine Fuel Level Gauge Empty/Full - 240-33.5 OHM - Black Dial Round Bezel [A2C59514094]
52MM (2-1/16") ViewLine Fuel Level Gauge Empty/Full - 240-33.5 OHM - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug Red LED Via Plus And Min Warning Light Operating voltage 8–32 V Input signal: standard Ω values Optional make-point switch can be connected Reverse polarity protection Anti-fog double lens Front side protection rating IP67 52 mm installation diameter 50 mm installation depth In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Fuel Level Gauge Size: 2-1/16" Box Set: No Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 7640178722934 Owner's Manual (pdf)
$85.00$76.50
Faria Euro Black 4" Tachometer w/Hourmeter - 6,000 RPM (Gas - Inboard) [32832]
Euro Black 4" Tachometer with Hourmeter - 6,000 RPM (Gas - Inboard)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Technical Specifications: 7 character LCD display 0-999999.9 Hours Updates in .1 increments Factory P/N TC9122*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/Hourmeter Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266328327 Quick Guide (pdf)
$169.99$149.50
Faria Newport SS 2" Cylinder Head Temperature Gauge w/Sender - 60 to 220 F [25011]
Newport SS 2" Cylinder Head Temperature Gauge with Sender - 60° to 220° FThe Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro. Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations. Perimeter lighting makes reading these gauges easy to read Day/Night. Features: Perimeter lighted Retro White Dial Black and Gray Graphics Domed fog resistant lens Two-piece Black pointers Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications: Operating Range - 60° to 220° F Includes Temperature Sender (TS5026) 2.06" (53 mm) Mounting hole Operating Voltage - 12/24 V In the Box: Gauge Mounting Hardware Installation Manual Factory P/N GP8188*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Voltage - Input Range (Volts): 12/24 V Series: Newport SS Gauge Type: Cylinder Head Temperature Gauge Size: 2" Box Dimensions: 4"H x 4"W x 5"L WT: 0.35 lbs UPC: 759266250116
$62.99$48.50
VDO SingleViu 80mm (3-1/8") Tachometer - 4,000 RPM [A2C3832990030]
SingleViu 80mm (3-1/8") Tachometer - 4,000 RPMSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.Features: 0-400 kHz Default Input RGB LED Illumination (default illumination set to White) Water Resistant Front & Rear Includes Wire Harness Voltage 12-24V Molex MX 150 8 and 12 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Tachometer Gauge Size: 80mm Box Set: No Box Dimensions: 5"H x 8"W x 8"L WT: 0.95 lbs UPC: 4103590683441 Owner's Manual (pdf)
$249.99$182.50
Digital Yacht Engine Link NMEA 2000 Engine Monitor [ZDIGELINK]
Engine Link NMEA 2000 Engine MonitorENGINELink interface is an NMEA 2000 wireless device that allows mobile phones, iPads, and tablets to display engine data as well as provide a link to boat AIS, depth, and GPS information for popular apps such as Navionics, NavLink, iNavX, SavyNavy, AquaMaps and 100's more. Now boaters can have boat engine data plus their favorite charting app displayed on their mobiles and tablets in real-time.Engine information such as RPM, temperature, pressure, and battery voltage is displayed as an attractive dashboard display through the web browser so there’s no need for a custom app. Setup and installation are easy. Just “T” into the boat's NMEA 2000 backbone and ENGINELink is self-powered from the network. It creates a secure, password-protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP-IP protocols are supported for compatibility with 3rd party apps.Either single or dual-engine installations are supported. If the vessel is fitted with NMEA 2000 compatible trim tabs or jack plates, then the status of these performance-critical systems is also displayed on the dashboard.You can configure ENGINELink through its own simple web interface - just open your web browser, enter its IP address and you'll access the attractive dash to display and configure your gauges. No complicated programming software or app is required. iOS and Android devices can display a navigation app and a web browser side by side - so you can have your favorite charting app open alongside engine instrument displays.You can change the network name & password and even merge the wifi to an existing wifi network on board. NMEA 2000 data can be viewed and logged in the web browser allowing for easy fault finding of issues. If the engine generates diagnostic alerts then these can be displayed and interrogated too.Features: Connect to any NMEA 2000-ready engine or network Built-in web gauge display – no app needed Display single or dual-engine gauges Configurable gauges – choose the parameters you want to monitor Set alarm/alert thresholds and view diagnostics TCP/UDP streaming of navigation data (GPS/AIS/Depth) for popular navigation apps Tank levels, fuel flow, and trip computer-type displays Tilt, trim tabs, and jack plate support Manufacturer-specific engine modes Specifications: Powered from NMEA 2000 Network – fits in seconds Password-protected wireless interface 802.11b/g/n AP or STA mode (can join another boat wifi network) TCP/UDP streaming of navigation data (AIS, GPS, and depth) to popular apps like Navionics, TZ, AquaMaps, iNavX etc Supported PGNs (1st Release) 127488, 127489, 127493, 130312, 130316, 127505, 130576, 128780 Preset gauge displays for leading manufacturers or customize your display Flexible, upgradeable interface Target Markets & Applications: Brings boat engine data to mobile devices Primarily aimed at the US center console and sports fishing market where outboard-powered craft have NMEA 2000 networks with engine data available but will work with any NMEA 2000 ready engine installation – inboard or outboard Provides additional data displays and extra functionality than MFDs Low-cost dashboard repeater accessible anywhere onboard Ideal test tool for service technicians Will be at the leading edge of electric propulsion PGN implementation Logging and replay of data for onshore analysis Support for the latest jack plate and trim tab PGNs, for optimizing boat performance Connects to Navionics app (and 100s more) for AIS, GPS, and depth data
$309.95$241.50
Faria Dress White 2" Hourmeter (Digital) [13130]
Dress White 2" Hourmeter (Digital) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens.Hourmeter operates by applying battery voltage across the gauge's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours. 2"- Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N MH0240*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Hourmeter Box Set: No Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Series: Dress White Box Dimensions: 4"H x 5"W x 5"L WT: 0.3 lbs UPC: 759266131309
$62.99$61.50
Faria Kronos 4" Tachometer w/Hourmeter - 7,000 RPM (Gas - Outboard) [39040]
Kronos 4" Tachometer with Hourmeter - 7,000 RPM (Gas - Outboard)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed. All instruments include two piece Newport pointer with White hub. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: 7 character LCD display 0-999999.9 Hours Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N TCH305*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/Hourmeter Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266390409 Quick Guide (pdf)
$199.99$174.50
Faria Platinum 2" Oil Pressure Gauge - 80 PSI [22024]
2" Oil Pressure Gauge - 80 PSIFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look. All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5089*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: Platinum Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Gauge Type: Oil Pressure Box Set: No Box Dimensions: 3"H x 4"W x 4"L WT: 0.3 lbs UPC: 759266220249 Brochure (pdf)
$69.99$60.50