Chesapeake White SS 4" Speedometer - 60MPH (Pitot)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Electronic speedometers operate by capturing pulses produced by a sensor. the pulses are then electronically converted to a speed reading very much like a tachometer converts ignition pulses to RPM.Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism.∗ Pitot tube sold separately.4" - Hole Size: 3.375" (85mm)Specifications:
Anti-scratch glass lens
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Imperial and Metric
Factory P/N SE9521*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Speedometer
Series: Chesapeake White
Box Set: No
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 4"
Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs
UPC: 759266338111
85mm (3-3/8") VMH-35 Multifunction GaugeThe Veratron VMH 35 is engineered for single inboard or outboard engine applications. The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters. This saves the need for an additional external converter. Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines.An integrated GPS makes the VMH 35 the perfect standalone navigation solution. It integrates speed, compass, and position into the engine data information. A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities.The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display. A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors. Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back. It fits a standard 3-3/8" panel cutout size.Features:
Integrated high-performance GNSS receiver
Integrated Analog to NMEA 2000 Gateway
Waterproof to IPX7
Stylish black-glass design with brushed stainless-steel ring
New generation sun-readable color hybrid display
Intelligent Battery Sensor (IBS) port
NMEA 2000® certified
In the Box:
VMH35 Gauge
Mounting Spinlock
Wire harness
Safety Instructions
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 3-3/8"
Gauge Type: Multifunction
Series: VMH-35
Box Dimensions: 4"H x 6"W x 6"L WT: 0.75 lbs
UPC: 7640178729773
Owner's Manual (pdf)Brochure (pdf)
Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication.It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class.Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it.The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration.Features:
Designed for NMEA 0183
Easy programing and installation
Technical Specifications:
Operating Voltage - 8 to 32 V
Protection Class - IP6K7
Illumination - Red LED
Dial - Black w/graphics
Pointer - Red Illuminated
Lens - Plastic Double Lens (anti-reflective)
Operating Temp. - -40°C to 115°C
Connector - Molex MX150 - 12 pin
In the Box:
Gauge
Wire Harness
Mounting Spinlock
Safety Instructions
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 8-32v
Series: OceanLink
Gauge Type: Rudder Angle
Gauge Size: 3-3/8"
Box Set: No
Box Dimensions: 4"H x 6"W x 6"L WT: 0.65 lbs
UPC: 7640178729452
Chesapeake Black 4" Tachometer - 4000 RPM (Diesel) (Mechanical Takeoff & Var Ratio Alt)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TD9127*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Tachometer - Diesel
Box Set: No
Series: Chesapeake Black
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 4"
Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs
UPC: 759266337428
Quick Guide (pdf)
Chesapeake White SS 2" Trim Gauge f/Honda EnginesPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Honda EnginesSpecifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N GP7440*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Gauge Type: Trim Guage
Series: Chesapeake White
Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs
UPC: 759266138896
Chesapeake White SS 5" Tachometer w/Digital Hourmeter - 6000 RPM (Gas) (Inboard)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.5" - Hole size: 4.375" (112mm)Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Scale - 0 to 10000 Hours
Factory P/N TC9381*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 5"
Voltage - Input Range (Volts): 12/24 V
Gauge Type: Tachometer w/Hourmeter
Series: Chesapeake White
Box Dimensions: 9"H x 9"W x 9"L WT: 1.35 lbs
UPC: 759266338630
Euro Black 2" Fuel Level Gauge - MetricPerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Fuel Level gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9357*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Gauge Type: Fuel Level
Series: Euro Black
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266128026
Chesapeake Black 2" Depth Sounder with In-Hull Transducer Perimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, and domed glass lens.The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists. Depth Sounder includes a Faria SN2010 In-hull transducer w/20' cable.2" - Hole Size: 2.0625" (53mm)Specifications:
Imperial and Metric Values
Domed Glass Anti-fog, Scratch Resistant Lens
Programmable Keel Offest
Stainless Steel Bezel
199 Foot (61m) Depth Capability
Audible and Visual alarm for Shallow/Deep Water Conditions
Factory P/N DS0111*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Depth Sounder
Box Set: No
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Series: Chesapeake Black
Box Dimensions: 8"H x 8"W x 8"L WT: 2.35 lbs
UPC: 759266137516
Quick Guide (pdf)
Euro Black 2" Oil Pressure Gauge (100 PSI)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm) Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Dual Scale - Imperial and Metric
Factory P/N GP9597*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Oil Pressure
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Series: Euro Black
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266128453
Chesapeake White SS 4" Multifunction GaugePerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.4" - Hole size: 3.375" (85mm) Multi-Function Gauge Displays:
Fuel (E-1/2-F)
Voltmeter (10 - 18 VDC)
Oil Pressure (0 - 80 PSI)
Water Temperature (120 - 220° F)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N GF0008*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Multifunction
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 4"
Box Set: No
Series: Chesapeake White
Box Dimensions: 5"H x 6"W x 6"L WT: 1.05 lbs
UPC: 759266338517
Transom Mount Transducer - 235kHzWith a low profile this depth unit offers little drag and easy installation for dead rise angles up to 30°. Recommended for boats up to 22' (7M) and speeds up to 55 knotsDesigned with a release bracket to protect against impact damage. Comes with a Faria HW0197 connection to easily connect to a Faria Depth Sounders with a 2-pin Packard connection.Specifications:
25" Cable included
HW0197 Connector
235KHz performance
Factory P/N SN2011*Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Kronos 2" Fuel Level Gauge (E-1/2-F)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed. All instruments include two piece Newport pointer with White hub.Fuel Level gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications:
Flat Scratch Resistant Lens
Polished Stainless Steel bezel
LED Illuminating around the Perimeter of the Dial
Newport style White Pointer
Factory P/N GP7683*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Fuel Level
Series: Kronos
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266190016
Quick Guide (pdf)