Boat Outfitting - Trolling Motor Accessories

Trolling Motor Mount for MK, Garmin, Rhodan, & Power PoleThe Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.Features:Maneuverability and PositioningThe Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.Adjustable Stowed PositionThe ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.High-Quality MaterialsThe use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.Corrosion ResistanceThe anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.Stainless Lock Pin and HardwareThe utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.Backing Plate for StrengthThe inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.Easy InstallationThe patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.CompatibilityQuick release bracket necessary for install with trolling motorComes pre-drilled for the quick release brackets for the followingMinn Kota Ulterra Terrova Quick release bracket models RTA 54/62 (fits all 36V permanent magnet motors)Minn Kota Quest Instinct Quest Terrova Quest Ulterra Quest Quick release bracket RTA 55/56 (fits all new Brushless/Quest motors)*Minn Kota RTA17 (fits all 24v motors for Smaller units)GarminKraken 24v/36v 48" to 110"Rhodan Large mount 6 bolt 36v 84"/96"108"/120" Smaller mount 4 bolt 24v Power PoleMOVE PV offshore trolling motors up to 96" shaft length (need a Sea Swivel XL for the 110" shaft length model)Limited Lifetime WarrantyFor salt water or fresh water use. Sea Swivel offers a limited lifetime warranty.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MKP-34 Prop & Nut Kit E Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation. Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 (part number 233160 / 1865018) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Prop & Nut Kits "A" (MKP-9) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota® prop dimensions (3/8", 1/2" and 5/16"). Includes prop nut and washer. Requires a crescent wrench for installation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Sea Secure Titanium Trolling Motor Security Bolt for Garmin KrakenTruly game-changing: the first-of-its-kind Grade 5 Titanium Trolling Motor Lock Assembly—engineered to work with multiple quick-release brackets.Features: No more rust stains No more seized locks No more clunky padlocks scratching your gelcoat Just a sleek, corrosion-proof solution that secures with a custom bolt-style key - simple, clean, and built to last

Read more less

Pontoon Outboard BracketThe Toon Kicker outboard motor bracket is designed for mounting a kicker motor to a pontoon.Features & Benefits: Made in the USA Consume less fuel while cruising around the lake Saves hours of wear on a big motor Operating restrictions on certain waters Back-up motor in the event of an emergency

Read more less

18" Straight Trolling Motor Plate for Minn Kota QuestThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55 and MKA-56 Quest series trolling motors.

Read more less

3/4" Riser Kit for Sea Swivel MountPrecision-cut CNC-machined 3/4-in starboard riser for the Sea Swivel Trolling Motor Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 3/4" 8x8" King Starboard Riser

Read more less

14" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:14" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

TMR-1 Remote for Ghost Trolling MotorFeatures: Adjust speed Change direction Set Anchor Includes lanyard Quick Guide (pdf)

Read more less

Weedless Prop for Ghost Trolling MotorAnglers will have no problem fishing in weeds or weedbeds with the optimized design of the Ghost Weedless Prop, which prevent weeds from wrapping around the prop.

Read more less

Mag Mount Trolling Motor Support Arm - 5.75"-9" ***Not compatible with Minn Kota Quest Motors!***The Mag Mount is the first of its kind, neodymium magnetic trolling motor support arm, crafted from high-quality Grade 5 titanium and double-coated UV-resistant rubber magnets. Designed to keep your trolling motor head stable while underway, the Mag Mount deploys with your motor head, keeping your deck clear of trip hazards and line catchers thanks to our flush-mounted magnet system. Installation has never been easier with a single screw mounting system; it can be installed virtually on any flat surface. When not in use with the trolling motor, the magnet serves as a handy place to hold hooks, fishing pliers, and more. With the Mag Mount, you’ll have a snag-free, streamlined deck and reliable magnetic support right where you need it. There's no snag with the Mag!*Please measure your trolling motor before ordering.*Mag Mounts are not compatible with Minn Kota Quest Trolling Motors.Take a measurement from the top of your gunnel to the bottom of your trolling motor shaft (right under trolling motor head) when in the STOWED position. This measurement cannot exceed 9". Completely adjustable height from 5.75" up to 9" when measured from the top of gunnel to bottom of trolling motor shaft. If a longer one is needed, there will be an XL version.

Read more less

Trolling Motor Foot TrayFish in comfort and streamline your deck! Reduce back and foot pain and fish all day with the Panther Recessed Foot-Control Tray. The tray mounts flush to your boat and levels out the foot pedal while you fish. This unit adds a clean look to your deck and easily fits all Minn Kota and MotorGuide foot-control trolling motors. Easy installation and maintenance free. Features: Forward taper design makes the foot pedal level and drains water faster; Water flows through a 3/8" ID x 8' flexible vinyl tube Constructed of high-impact, UV-resistant, high-density polyethylene Color-molded throughout, no paint to chip or fade Installs easily in any brand boat, and includes installation instructions, cutting template, drain tube, and hardware Fits all Minn Kota and MotorGuide foot-control trolling motors

Read more less