Boat Outfitting - Trolling Motor Accessories

Mount Base Kit for Force® CurrentUse this mounting base kit and hardware to secure your Force® Current trolling motor to your kayak.

Read more less

MKR-DSC-10 DSC Transducer Adapter Cable - Lowrance® 7-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. Only provides traditional 2D sonar.Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

Read more less

i-Pilot System Remote Access w/BluetoothNOTHING COMES REMOTELY CLOSE.The same i-Pilot that lets you lock onto a fishing spot, record and retrace paths, and command speed and steering just got better. Redesigned with a larger LCD screen, more options, and better controls, we've dialed in the technology that lets you dial in your boat position.Redesigned RemoteWe gave it a 33% larger LCD screen that's fully viewable in sunlight, expanded menu navigation, and more intuitive controls - making the i-Pilot remote better than ever.Bluetooth CommunicationThe new i-Pilot system connects via Bluetooth, allowing for easy software updates to add new features to your system via your smartphone.i-Pilot Phone AppBluetooth communication allows new i-Pilot to pair with your smartphone, allowing for easy software updates and quick command of speed, steering, Spot-Lock, high speed bypass, and Advanced AutoPilot.Heading SensorSelect i-Pilot systems feature a new Heading Sensor, which recognizes changes in the boat's heading due to wind andcurrent, and communicates with the i-Pilot system to minimize boat swing for a more accurate, stronger hold.Reinvented Spot-LockEnhanced with new hardware and software algorithms, Spot-Lock works holds you tighter to your fishing spot than ever before, making it the most accurate electronic GPS anchor ever.Spot-Lock JogMove your Spot-Lock five feet forward, backward, left or right - just by pushing a button.Additional Features: iTrack Record/Playback: Store and retrace up to six 2-mile trolling paths to return to later Advanced AutoPilot: Stay on a heading automatically Cruise Control: Precisely dial in and adjust speed in 0.1 mile-per-hour increments CoPilot: Control and monitor speed, steering, prop on/off and high speed bypass *The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Johnson Outdoors, Inc. is under license. Other trademarks and trade names are those of their respective owners.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Powerdrive/Riptide PowerdriveWith an 18' cable and waterproof connector plug, this pedal delivers side-to-side steering control, and includes a momentary/constant ON switch and a speed control knob for precise adjustments. Plug-n-play with PowerDrive V2, new PowerDrive and new Riptide PowerDrive trolling motors.  Compatible with new CoPilot. Compatible with PowerDrive, PowerDrive V2, Riptide PowerDrive and Riptide SP trolling motors manufactured in 2007 and after.*Foot pedal is NOT compatible if motor is equipped with an i-Pilot system.Features: Side-to-side steering control Momentary/constant ON switch Speed control knob for precise adjustments Includes 18' cord with waterproof connector Compatible with CoPilot remote system WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

MKA-50 Bow-Mount Stabilizer Kit for FortrexFeatures: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

These ergonomic handles fit all outboard and trolling motors. Simply twist the handle to loosen, adjust and tighten, then you?re ready to fish comfortably in any situation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Take advantage of easier steering and speed control on any hand control motor. These extension handles let you fish more comfortably and attach easily to your trolling motor?s tiller handle.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

14" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 14" x 8" x ½”Suggested hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

20" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 20" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less

Happy Troller - Large Plate Large Troller: Fits inboard/outboards plus all outboard motors 50 hp and larger.For the Fisherman who thinks he has everything!Slows even big motors down to that "ever-so-slow" fish tantalizing speed.A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.Locks in "down" position for trolling.Locks in "up" position for cruising.Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.Key Features: Reduces troll speed in "down" position Acts as a stabilizer in "up" position Maintains stability in bow-light boats Smooths out ride in rough water Reduces porpoising and cavitation Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish Installs in 15 minutes Stainless steel mounting hardware and installation & operating instructions provided with each unit Owner's Manual (pdf)

Read more less