Boat Outfitting - Trolling Motor Accessories

Prop & Nut Kits "A" (MKP-9) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota® prop dimensions (3/8", 1/2" and 5/16"). Includes prop nut and washer. Requires a crescent wrench for installation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKP-34 Prop & Nut Kit E Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation. Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 (part number 233160 / 1865018) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Pontoon Outboard BracketThe Toon Kicker outboard motor bracket is designed for mounting a kicker motor to a pontoon.Features & Benefits: Made in the USA Consume less fuel while cruising around the lake Saves hours of wear on a big motor Operating restrictions on certain waters Back-up motor in the event of an emergency

Read more less

20" Straight Trolling Motor Plate for Minn Kota’s QuestThe Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Force® Kraken LiveScope™ Mounting BracketUse this bracket to mount your compatible LiveScope transducer to your Force Kraken trolling motor by running the cable through the shaft of the motor.

Read more less

Small Offset Trolling Motor PlateThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate (18.5" x 13.5" x 1/2").Suggested Hardware: 1/4" - 20 phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

20" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 20" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Powerdrive/Riptide PowerdriveWith an 18' cable and waterproof connector plug, this pedal delivers side-to-side steering control, and includes a momentary/constant ON switch and a speed control knob for precise adjustments. Plug-n-play with PowerDrive V2, new PowerDrive and new Riptide PowerDrive trolling motors.  Compatible with new CoPilot. Compatible with PowerDrive, PowerDrive V2, Riptide PowerDrive and Riptide SP trolling motors manufactured in 2007 and after.*Foot pedal is NOT compatible if motor is equipped with an i-Pilot system.Features: Side-to-side steering control Momentary/constant ON switch Speed control knob for precise adjustments Includes 18' cord with waterproof connector Compatible with CoPilot remote system WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Trolling Motor Propeller Cover- 2-Blade Cover - 12"- BlackExtend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy-duty marine grade vinyl.One-year warrantyWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

G-Force EQUALIZER Trolling Motor Lift Assist - BlueThe G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water.  Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straightforward to install. A must-have for any Motorguide owner, the EQUALIZER™  is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.Includes: 2X EQUALIZER™ Trolling Motor Assist Air Pistons Drilling template Marine-grade stainless steel hardware Instructions Picture of the mount and basic guidelines Equalizer decal Spacer set available for certain boats that need a riser spacer on gunnel NOTE:  Not compatible with Motorguide X3 motors WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

18" Straight Trolling Motor Plate for Minn Kota’s QuestThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55 and MKA-56 Quest series trolling motors.

Read more less