Boat Outfitting - Trolling Motor Accessories

Force™ Trolling Motor Foot PedalUse the wireless foot pedal for instant control and responsiveness while using your compatible trolling motor. The pedal feels and steers like a cable-steered pedal. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Trolling Motor Power PlugUse this to add a 70A power plug to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

MOB Tag with Black Quick Release BandProtect yourself with this wireless, wearable MOB tag. The tag can be worn on a wristband, carabiner, or key ring float.Specifications: Dimensions (HxWxD): 43.94 mm x 37.26 mm x 11.96 mm Wireless range: Up to 66 ft (20 m) Battery type: CR 2032 coin cell Battery life: >1,200 hours of connected time What's In The Box? Wireless MOB Tag CR2032 coin cell battery 20 mm Quick Release Band Carabiner with 20 mm Quick Release attachment Floating foam keychain Documentation

Read more less

Trolling Motor Power ReceptacleUse this to add a 70A power receptacle to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

MKA-62 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors

Read more less

MKP-39 Weedless PropThis 100% weedless prop helps you move through heavy vegetation – even at slow speeds all the while conserving battery power. Designed to work exclusively with QUEST Series motors. includes a prop pin, nut, and washer.Features: Weedless Prop, made exclusively for QUEST Series motors, is designed to power through heavy vegetation and prevent weeds from wrapping around the prop and lower unit, even at slower speeds Helps you move through heavy weeds and vegetation – even at slow speeds while conserving battery power Fits 4-1/2" QUEST Series lower units For use with a 1" x  3/16" Prop/Drive Pin Prop nut thread 3/8"-24

Read more less

MKA-21 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Talon Quick Release Disconnect PlugThis heavy-duty, waterproof connector features an all-inclusive screw-lock design.

Read more less

Ulterra/RT Ulterra Corded Foot PedalDual mode operation controls AutoStow/Deploy and Power Trim as well as steering, speed, prop on/off, Spot-Lock, and AutoPilot. Includes an 18' cord with a waterproof connector.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options AutoPilot ON/OFF button with LED indicator Momentary/Constant ON button with LED indicator Rotary speed control dial 18' cable with waterproof connector plug Works in conjunction with i-Pilot, i-Pilot Link, and new GPS navigation systems Compatible with Ulterra and Riptide Ulterra trolling motors model year 2017 and after

Read more less

RTA-17 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features: Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

20" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:20" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Large Offset Trolling Motor PlateThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate. (18.5” x 15.5” x 1/2”).Suggested Hardware: 1/4" - 20 phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less