Boat Outfitting - Trolling Motor Accessories

Large Offset Trolling Motor PlateThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate. (18.5” x 15.5” x 1/2”).Suggested Hardware: 1/4" - 20 phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

XL Trolling Motor MountThe Sea Swivel XL is designed for trolling motors 100"+ and has a larger surface area (10" X 10") and also a larger backing plate (10" X 10"). They distribute the load to a larger surface area of the fiberglass. The patented Sea Swivel is a rotating trolling motor mount designed to pivot a trolling motor to the correct position while deployed. Also, it has the benefit of adjusting the stowed position to match the angle of every boat! The ultimate trolling motor mount!A quick-release bracket is necessary for installation with a trolling motor. Comes pre-drilled for the quick-release brackets for the following: Minn Kota - Ulterra, Terrova Quick-release bracket models RTA 54/62 (fits all 36V permanent magnet motors) Minn Kota Quest - Instinct Quest, Terrova Quest, Ulterra Quest Quick-release bracket RTA 55/56 (fits all new Brushless/Quest motors) Minn Kota RTA17 (fits all 24v motors for smaller units) Garmin Kraken 24v/36v 48" to 110" Rhodan Marine large mount 6 bolt 36v 84"/96"/108/120" Rhodan Gen 5 motors up to 120" Rhodan Marine smaller mount 4 bolt 24v Power Pole Move PV 36V/24V  Power Pole Move PV offshore

Read more less

Trolling Motor Power ReceptacleUse this to add a 70A power receptacle to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

Quick Release Mounting Bracket for Axis & Shallow Water Anchors - BlackRemoving your Lewmar shallow water anchor is a breeze with our compatible quick-release mounting bracket. Available in black or white, this dovetail-style bracket mounts directly to your boat’s transom or our other available mounting brackets, allowing for slide-out removal of your shallow water anchor for trailering, storage, or switching between boats.The motor mounting bracket for shallow water anchors attaches directly between the outboard motor and the transom, eliminating the need to drill into your boat's hull. Its powder-coated aluminum finish offers long-lasting durability in marine environments. Designed for use with Lewmar shallow water anchors, this bracket offers a secure and reliable fit. Professional installation is recommended, as specialized equipment is required to support the motor properly during installation. Using basic tools, the motor mounting bracket is compatible with the Quick Release bracket for easy anchor removal. Features: For use with the Axis™ and Vector™ shallow water anchors DIY installation with included hardware Dovetail style mounting bracket securely holds the anchor in place Compatible with other Lewmar shallow water anchor mounting brackets Allows anchor to be easily removed with simple hand tools for transport, storage, or use on other vessels Durable powder-coated aluminum finish withstands harsh marine conditions Designed for port or starboard mounting Measures 8" x 6" x 1.5" Specifications: Color: Black Anchor Style: Shallow Water Hardware Type: Mounting Hardware Item Length: 8" Item Width: 6.5" Item Height: 1.5" What's Included? Mounting hardware Installation instructions

Read more less

G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Actuator Caps, Position Sensors & 30' CableActuator Upper Hinge with Coil – PortWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Get the power you need to push through the thick stuff with the Power Prop. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips 2-connector kit Safe and easy Semi-gloss finish

Read more less

Talon 6" Setback Bracket Riser Just like Talon locks you to your spot in the water, Minn Kota's mounting and adapter brackets keep Talon locked on your boat in any condition. Unparalleled strength combined with an innovative modular design, so it's easy to select the right mount and get Talon rigged up on any boat. Features: Provides 6" of additional setback For direct transom mount application only Provides precise boat positioning Quickly and quietly stops boat Easy to install

Read more less

Force™ Weedless PropFishing in heavy vegetation? Use this weedless prop to help push weeds away from your compatible trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

MKA-16-03 Quick Release BracketFor quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.- Allows trolling motor to be quickly removed from and reattached to boat deck- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw- Solid, anodized aluminum construction- Includes stainless steel mounting hardware- Brackets can be secured with padlock (not included) for additional securityWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Advanced GPS Navigation Wireless RemoteThe Advanced GPS Navigation system can be paired with up to three wireless remotes. Add extra remotes to your setup for added flexibility. The waterproof remote is lightweight with intuitive user menus and a simplified keypad with four customizable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models, or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included). Features: The Advanced GPS Navigation system can be paired with multiple remotes. Add extra remotes to your setup for increased flexibility. Features four programable One-Boat Network buttons Compatible with Bluetooth-enabled Advanced GPS Navigation systems only Waterproof and lightweight Wireless Remote is powered by 2 AA batteries (included) Lanyard and carabiner are included

Read more less