Boat Outfitting - Trolling Motor Accessories

Replacement Cable for Trolling Motor Pull RopeNever worry about that trolling motor pull rope breaking again. This stainless steel vinyl coated braided cable is used to replace the manufacturer's pull rope on your trolling motor. This replacement cable will not rust, break or rot. It comes with complete, easy to follow installation instructions. Don't wait for your rope to break, replace it with this durable steel cable now. 

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less

Pontoon Outboard BracketThe Toon Kicker outboard motor bracket is designed for mounting a kicker motor to a pontoon.Features & Benefits: Made in the USA Consume less fuel while cruising around the lake Saves hours of wear on a big motor Operating restrictions on certain waters Back-up motor in the event of an emergency

Read more less

Force® Kraken Transducer Replacement KitEasily remove, replace, or upgrade the built-in Garmin transducer on a compatible trolling motor with this kit. It’s recommended to replace all O-rings and compression seals so the motor returns to its original factory waterproof sealing. The nose cone is not included.Specifications: Color: Black Includes Transducer Replacement Part: Force® Kraken Compatible Devices:Force® Kraken trolling motor

Read more less

Force® Pro Trolling Motor High Power Lift Assist Gas SpringThis optional spring upgrade reduces the force needed to stow your Force or Force® Pro Trolling motor, ideal for trolling motors with Spy™ pole.

Read more less

Large Offset Trolling Motor Plate for Minn Kota Quest - BlackThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 tapered Phillips machine screws, fender washers, and lock nuts 3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

20" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 20" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

16" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

36V Standard Trolling Motor SystemToday’s high-output trolling motors require good power sources. This easy-to-use system is designed for those who take their fishing seriously.Easy battery removal and replacement from tight boating compartments now only takes seconds and no tools are needed.Created for the sportsman who wants to easily connect, replace, or just disconnect their 36-volt marine battery systems from tight boat compartments in seconds. This connection kit keeps trolling motor connections intact, whether the batteries are connected or out of the boat.Connect-Ease's patented system takes the hassle and frustration out of remembering how to connect 36-volt trolling motors with the proper 36-volt series for battery hookups. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA

Read more less

60A Circuit BreakerUse this 60A circuit breaker when installing a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor Specifications: Amperage: 60a Box Dimensions: 1"H x 2"W x 3"L WT: 0.15 lbs UPC: 753759246495

Read more less

Dogbone Stabilizer for Spy™ PoleThe dogbone stabilizer securely braces the Spy pole to Force® and Force Pro trolling motors while allowing independent rotation and shaft height adjustments. The stabilizer is required on Spy pole whenever two transducers are installed on the pole.

Read more less