Boat Outfitting - Trolling Motor Accessories

MKA-50 Bow-Mount Stabilizer Kit for FortrexFeatures: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flat Foot Recessed Tray for Minn Kota Foot PedalsThis recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Read more less

18" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Adjustable Perspective Bottom Mount for LiveScope™ TransducersThe adjustable perspective mode mount takes your LiveScope real-time scanning sonar to the next level. Attach your LiveScope transducer to the bottom of your Spy pole and access multiple viewing angles with ease. Provides forward (0°), down (0°), and adjustable perspective (0°, 7.5°, 15°, 22.5°) modes.

Read more less

5" Bolt (Extended) for Sea Swivel MountSpecifications: Bolt: 5" Extended

Read more less

Bracket Mounting Disks - Quantity 6An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached. Benefits of Using Mounting Disks: Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment Accessibility:  Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually *When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.

Read more less

18" Straight Trolling Motor Plate for Minn Kota Quest - BlackThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55 and MKA-56 Quest series trolling motors.

Read more less

Large Offset Trolling Motor Plate - BlackThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder-coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate. (18.5” x 15.5” x 1/2”).Suggested Hardware: 1/4" - 20 Phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

1.5" Riser Kit for Sea Swivel Standard MountPrecision-cut CNC-machined 1.5-in starboard riser for the Sea Swivel Trolling Motor Standard Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 1.5" Riser Kit 8"x8" with 4x5" mounting bolts & 6" main bolt

Read more less

3/4" Nut for Center BoltSpecifications: Nut: 3/4" For center bolt

Read more less

3/4" Riser Kit for Sea Swivel MountPrecision-cut CNC-machined 3/4-in starboard riser for the Sea Swivel Trolling Motor Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 3/4" 8x8" King Starboard Riser

Read more less

60A Circuit BreakerUse this 60A circuit breaker when installing a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor Specifications: Amperage: 60a Box Dimensions: 1"H x 2"W x 3"L WT: 0.15 lbs UPC: 753759246495

Read more less