Boat Outfitting - Trolling Motor Accessories

16" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 16" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Small Offset Trolling Motor Plate for Garmin KrakenThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

12" Straight Trolling Motor Plate for Garmin Force® KrakenThe Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate is designed for the Garmin Quick Release Plate System. It offers a robust, reliable solution for installing any Force Kraken Trolling Motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications:Size: 12” x 8” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate designed for the Garmin Quick Release Plate System.

Read more less

24V Trolling Motor Wiring Kit with 70A Plug & ReceptacleThe Marinco Trolling Motor Wiring Kit makes trolling motor installation simple, packaging everything you need for a clean and professional set-up into a single box. Take the guesswork out of trolling motor installation with the Marinco Trolling Motor Wiring Kit. Bringing together the industry’s most trusted brands, the kit features marine-grade equipment for quality installations that go the distance. Clear instructions and color coding make installation quick and easy. And get total peace of mind, knowing you’ve got everything you need for a professional set-up – all in a single box.Features: Pre-terminated Connections for Quick and Easy Installation Bonded Cable for Ease of Routing Ancor® Lugs and Heat Shrink Tubing Includes Jumper to put Batteries in Series Kit Includes: 44ft of 6/2AWG Bonded Cable 50A Blue Sea Systems® 285 Series Circuit Breaker Pre-terminated Lug Connections (5/16” lugs for universal battery terminal connections, color coordinated for positive and negative) One Series Jumper for Battery Connection 70A Marinco Trolling Motor Plug and Receptacle

Read more less

When wiring, use these heavy-duty, 10-gauge connectors where a plug and socket can't be used. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MKP-23 Prop & Nut Kit D Quickly, easily remove or replace your prop with this kit. A crescent wrench is required for installation. Compatible with Minn Kota Props:MKP-24 Weedless Wedge (part number 2331130 / 1865013) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Weedless Wedge™ 2 Props (MKP-32) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" Compatible with Motor Models With Serial Number Prefix "WW"55AT, 55AT/H, 70AT, TERROVA 55, TERROVA 55/US2, TERROVA 55/AP, TERROVA 55/AP/US2, MAX 55/SC, MAX 55, MAX 55/SC/H, MAX 70, MAX 70/H/3X,MAX 70/SC, MAX 70/SC/H, MAX 70/US, MAX 55T, MAX 70T, 50PD v2, 55PD v2, 55PD V2/US2, 55PD V2/AP, 55PD V2/AP/US2, 65PD V2, 70PD V2, 70PD V2/AP ,70PD V2/AP/US2, 54PD V2 pontoon, 68PD V2 pontoon, 55HC pontoon, 70HC pontoon, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US, 65PD, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 70, VECTOR 70/3X, EDGE 45, EDGE 55, EDGE 55/H, EDGE 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55XL, RT 55/ST/CP , RT 55/ST/CP/AP, RT 55/SP/CP, RT 55/SP/CP/AP, RT 70/SP/CP, RT 70/SP/CP/AP, RT 55/SM /L&D, RT 55/SM/L&D/SC, RT 55/SM/L&D/3X, RT 55/SM/BG/3X, RT 70/SM/L&D/SC , RT 55/SE/L&D, RT 70/SE/L&D, RT 55/B/H, RT55/B/SC/L&D, RT55/B/L&D/3X, RT55/B/3X, RT65/B/SC, RT65/B/SC/L&D/3X, RT 70/B/H, RT 70/SC, RT50/S, RT55/S, MK55EM, RT 55EM, TRAXXIS 70, TRAXXIS 55, TRAXXIS 55/SCWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Foot Control Mount for Spy™ PoleInstall a quick-release mounting puck to your Spy pole for foot control.

Read more less

Gesture Remote Mount Kit for Spy™ PoleThis kit includes all mounting options for your Spy pole gesture remote, including a lanyard holder, hat mount, and rod mounts.In The Box:Gesture remote mount kit with mounts for: 1 hat 1 lanyard 2 poles/blanks 2 poles/bands

Read more less

16" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Flat Foot Recessed Tray for Minn Kota Foot PedalsThis recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Read more less

Adjustable Perspective Bottom Mount for LiveScope™ TransducersThe adjustable perspective mode mount takes your LiveScope real-time scanning sonar to the next level. Attach your LiveScope transducer to the bottom of your Spy pole and access multiple viewing angles with ease. Provides forward (0°), down (0°), and adjustable perspective (0°, 7.5°, 15°, 22.5°) modes.

Read more less