Boat Outfitting - Trolling Motor Accessories

MKR-US2-13 Universal Sonar 2 Adapter Cable Connects Humminbird ONIX FishfinderUniversal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird ONIX fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.*200 kHz/83 kHz compatible and only provides traditional 2D sonar Brochure (pdf)

Read more less

Force™ Trolling Motor RemoteSimply "point-and-go" and take complete hands-free control of your compatible trolling motor with this remote control. The control has a built-in sunlight-readable display. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Force™ High Efficiency PropReplace your prop without having to replace the entire Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

18" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Ultrex Lift Assist Cylinder for 115LB Motors with 45” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ and Humminbird® MEGA 360 Imaging™ reduces the effort required for motor stow and deploy replaces the factory standard lift assist cylinder Designed for Ultrex™QUEST™ series motors with a shaft length of 45”

Read more less

MKA-57 Quick Release BracketThe bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.Features: Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows trolling motors to be quickly removed from and reattached to the boat deck The dual Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, a lanyard, and a locking pin Upper and lower plates include slots for securing with a padlock (not included) for added security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

Read more less

12" Straight Trolling Motor Plate for Garmin Force® KrakenThe Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate is designed for the Garmin Quick Release Plate System. It offers a robust, reliable solution for installing any Force Kraken Trolling Motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications:Size: 12” x 8” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate designed for the Garmin Quick Release Plate System.

Read more less

14" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:14" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

16" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

16" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 16" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

60A Circuit BreakerUse this 60A circuit breaker when installing a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor Specifications: Amperage: 60a Box Dimensions: 1"H x 2"W x 3"L WT: 0.15 lbs UPC: 753759246495

Read more less

Terrova/Riptide Terrova Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and GPS navigation systems. Compatible with Terrova and Riptide Terrova trolling motors, model years 2017 and after.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options AutoPilot ON/OFF button with LED indicator Momentary/Constant ON button with LED indicator 18' cable with waterproof connector plug Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and new GPS navigation systems Compatible with Terrova and Riptide Terrova trolling motors model year 2017 and after

Read more less