Boat Outfitting

Actuator Lower Bracket with Pin Replacement of lower bracket with pin for the actuator.  Attaches to lower ram on actuator with a pin.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

XL Wave Mop HeadShurhold x-large wave mope head with Shur-Lok quick release. 

Read more less

Universal V-Throttle CableNot redundant 5V cable/1 engineLength: 2M(6.6') Quick Guide (pdf)Brochure (pdf)

Read more less

Wired Magnetic REED SwitchMagnetic reed switches are used to report unauthorized entry into a main cabin through a door or external hatch. Reed switches can be connected in series to monitor multiple entry points, providing secure protection against theft. In the event of unauthorized entry, the switches will trigger an entry alert to the boat owner, and can also be configured to sound an audible alarm on the boat.Specifications: Dimensions: 1x1in (2-part body, 0.5x1in each) 12in (wire) Screw mount and adhesive mount included Grounds directly to security input Works with MTC and Siren 3 Pro

Read more less

Blue Ice Ceramic Shield - QuartBlue Ice Ceramic Shield is a topcoat protectant that is based on Si02, or silica. Silica is the basis for all ceramics. Smoove has formulated a version that is easy to apply and has great durability.For best results, hand-apply a very thin layer, up to 15 feet at a time, let it haze, then buff off with a clean polish pad.Features:It is easy to apply and has great durabilitySpecifications:Size: Quart Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 3"W x 9"L WT: 2.3 lbs UPC: 794811504726

Read more less

Pro-Cut 2500 Professional Cutting Compound - QuartPro-Cut 2500 is a professional cutting compound that will cut down 2500-grit scratches. This compound is safe for gel-cote and marine-grade paints such as AwlGrip or Alexseal.Features:Will cut down 2500 grit scratchesSpecifications:Size: Quart Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 9"L WT: 3 lbs UPC: 794811504740

Read more less

Blue Ice Ceramic Shield - GallonBlue Ice Ceramic Shield is a topcoat protectant that is based on Si02, or silica. Silica is the basis for all ceramics. Smoove has formulated a version that is easy to apply and has great durability.For best results, hand-apply a very thin layer, up to 15 feet at a time, let it haze, then buff off with a clean polish pad.Features:It is easy to apply and has great durabilitySpecifications:Size: Gallon Specifications: Type: Ceramic Coating Box Dimensions: 4"H x 7"W x 11"L WT: 8.7 lbs UPC: 794811504733

Read more less

Pro-Cut 1000 Professional Polishing Compound - QuartPro-Cut 1000 is a revolutionary fiberglass polishing compound; this compound takes advantage of microbead technology. The micro-bead compound is a cutting compound that rapidly cuts through the heaviest oxidation. As the buffing continues, the unique micro-bead abrasive system breaks down into finer, tiny particles that eventually become a super-fine micro-polish. This metamorphosis enables the professional user to compound and then polish in one easy step. Pro-Cut is wax/silicone-free and micro-bead exact side cutting beads assure perfect cutting grade every time with minimal residue.Features: Use as a finishing polish or for heavy oxidation Turn a three-step into a two-step – Pro-cut to wax Specifications:Size: Quart Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 9"L WT: 3 lbs UPC: 794811504597

Read more less

Pro-Cut 2500 Professional Cutting Compound - GallonPro-Cut 2500 is a professional cutting compound that will cut down 2500-grit scratches. This compound is safe for gel-cote and marine-grade paints such as AwlGrip or Alexseal.Features:Will cut down 2500 grit scratches Specifications:Size: Gallon Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 7"W x 12"L WT: 11.8 lbs UPC: 794811504757

Read more less

Beadcoat Ceramic Sealant Sio2 + Graphene Paint Protectant - 16ozFeaturing a SiO2+ graphene structure, this easy-to-use sealant provides ultra-durable hydrophobics and a high gloss, super slick finish to a variety of automotive exterior surfaces.No. 100 Beadcoat SiO2 + Graphene Spray Sealant quickly provides ultra-durable hydrophobics + a high gloss, super slick finish to a variety of automotive exterior surfaces. Featuring a functional ceramic-graphene resin structure, this easy-to-use formula provides 6+ months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim.Features: Available in 16 fl oz Average Spread/Coverage: 600-1,000 sq ft TIPS: Always test the product first in a small, inconspicuous area to ensure the desired result.*For optimal bond/protection, ensure the surface is free of above-surface contamination; this can be achieved with iron remover + clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish (e.g. Collinite’s No. 390)As a lubricating drying aid: Following a wash while the vehicle surface is still wet-apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfiber towel, wipe the entirety of the panel until dry. Flip towels as necessary, and change towels as they become saturated. Repeat the process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.Use: 6+ months of stand-alone paint protection Extreme hydrophobic beading effect Applied over ceramic coatings, paint protection film For paint, glass, wheels, exterior trim Easy wipe on-wipe off high gloss shine Drying aid (once a base layer is applied) UV and detergent-resistant Not For Use On: Removal of surface defects (swirls, scratches) Not for use on contaminated surfaces; untreated by iron (chemical) or clay (mechanical) processes Interior surfaces Tires Applied over waxes and sealants Hot surfaces Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 3"W x 9"L WT: 1 lbs UPC: 638234001007

Read more less

SLICKR 3-In-1 Ceramic DetailerSuper versatile Booster-Drying Aid-Topper & more features a Si02+polymer structure, hyper-slick finish, and fast hydrophobic results.No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With a SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant, or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant, or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.Features: Available in 16 fl oz Average Spread/Coverage: 600-1,000 sq ft TIPS: Always test the product first in a small, inconspicuous area to ensure the desired result.As a lubricating drying aid: Following a wash while the vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe the entirety of the panel until dry. Flip towels as necessary, and change towels as they become saturated. Repeat the process on all painted surfaces (and glass).As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move the decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface to maintain slickness/lubrication and to avoid marring. Remove the product from the panel with a dry microfiber towel. Repeat the process on all painted surfaces (and glass).Use: Paint, glass, wheels, and trim Extremely slick finish Removes light dust, fingerprints, and smudges Up to 3 months of hydrophobic Easy wipe on wipe off high gloss shine Clay lubricant, drying aid, show car prep Topper over waxes, sealants, ceramic coatings, paint protection film Not For Use On: Interior surfaces (Leather, Vinyl, Dash) Surface defects, swirls, scratches Heavily soiled or contaminated surfaces Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 3"W x 10"L WT: 1.15 lbs

Read more less

Insulator Speed Wax High Gloss Sealant TopperBuilt from Insulator Wax technology, this super slick Topper/Maintainer combines high gloss shine and durable hydrophobics in a fast and easy sprayable application.Features: Provides high gloss shine Provides durable hydrophobic weather protection Can be layered over other Collinite waxes/sealants (#845, 476, 915) It can be used as a stand-alone protectant For automotive and marine use Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 4"W x 10"L WT: 1.15 lbs UPC: 638234005487

Read more less