Boat Outfitting

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Fourtech 15' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 15' Specifications: Cable Length (Feet): 15' Box Dimensions: 8"H x 18"W x 30"L WT: 14.6 lbs UPC: 702755054085

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - BlackSikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 9.84 Box Dimensions: 11"H x 13"W x 13"L WT: 7.8 lbs UPC: 5060114795419 Quick Guide (pdf)Brochure (pdf)

Read more less

EV 077B Professional Grade Black Electrical Tape for Insulating & Splicing - 3/4" x 66' - 10-PackProfessional grade, 7.0 mil, all-weather vinyl insulating tape used for electrical and mechanical protection in temperatures ranging from 0 F to 220 F. UL Listed and CSA Approved, EV 77B black electrical tape is lead-free, flame retardant, and is engineered with a polymeric backing construction, as well as a specialized method of bonding the adhesive to the vinyl backing, which allows the tape to be highly conformable and deliver a moisture-tight seal, even in extreme temperatures.Features: 7.0 mil, professional-grade electrical tape High tensile strength High performance in a wide temperature range Resistant to UV, oils, acids, alkalies, corrosive chemicals, and water Flame retardant Technical Specifications: Tape Width - 3/4" Roll Length - 66' Adhesive - Non-corrosive, rubber-based Adhesion to Stainless Steel - 28 oz/in width Dielectric Breakdown - 10,000V Dielectric Strength - 1,429V/mil Elongation - 300% Service Temperature Range - 0°F-220°F Tensile - 20 lbs/in width Thickness - 7.0 mils Color - Black

Read more less

36V Parallel Kit for 2-36V Batteries to 1 MotorUse with all 36V Trolling Motors, Rigging, and Battery Removal is a Foolproof Plug and Play System with Built-in Onboard Charging Leads integrate your onboard charger through pre-wired connections and heat-shrinkable splices the best marine corrosion protection "Double Time" 36V parallel Kit for (2) 36V batteries to (1) 36V trolling motor W charging Leads.

Read more less

24V 6 Gauge Heavy Duty Series SystemAlways on the cutting edge of rigging and power solutions, CONNECT-EASE has been watching the trolling motor landscape change significantly as Minn Kota, Power-Pole, Garmin, Lowrance, and others launch more powerful and torque-enabled models in everything from 12 to 36 volts; there are even some 48-volt models starting to appear. The upcoming years will be fascinating as Minn-Kota showcases the pre-launched, completely redesigned brushed and new brushless trolling motors—everything from Terrova to Ulterra to Ultrex—as exciting QUEST series versions in these trolling motor families.The same goes for Power-Pole with their recently introduced MOVE brushless trolling motors. Garmin and Lowrance also promise to show some advanced, trolling motor designs.Yes, trolling motors are getting a lot more advanced, and with that, rigging will become an even greater challenge. These brushed and brushless trolling motors require clear, clean, and reliable power, which is where CONNECT-EASE trolling motor rigging and power solution products come in.Features: 6-gauge wire, a quick and easy installation, and powerful, proven performance for any 24V trolling motor installation Lithium-compatible and the best power connection for 60-120 amp lithium batteries and any brand/model 24V trolling motor Heat-shrinkable butt splices

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (5/16" – 9/16") Clamping Range - 10-Pack - SAE Size 3Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 3 Hose Inner Diameter: (inch) 3/16" – 1/4" Clamping Range: (inch) 5/16" – 9/16"  / (mm) 8-14 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

Swivl-Eze Adjustable Pedestal 11-1/2" - 17-1/2"Features: Adjustable Range (inch): 11-1/2" - 17-1/2" Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Read more less

White Foam Compounding PadMedium cut foam for medium to light compounding.Designed with a recessed cup that prevents the backing plate from coming in contact with the buffing surface.Features: Single-sided hook and looppad 8.5" in diameter 1-1/2" thick pure premium foam Specifications: Type: Buffers & pads Box Dimensions: 2"H x 8"W x 8"L WT: 0.15 lbs UPC: 075929701710

Read more less

Grey Foam Polish PadFinishing foam for polishing and swirl removing.Designed with a recessed cup that prevents the backing plate from coming in contact with the buffing surface.Features: Single-sided hook and loop pad 8.5" in diameter 1-1/2" thick pure premium foam Specifications: Type: Buffers & pads Box Dimensions: 2"H x 8"W x 8"L WT: 0.15 lbs UPC: 075929701727

Read more less

Wool Compounding Pad - Black & White Heavy CutHeavy cut, 100% twisted wool compounding pad for removing all grits of sanding scratches.Designed with a recessed cup that prevents the backing plate from coming in contact with the buffing surface.Features: Single-sided hook and loop pad 9" in diameter 1-1/2" thick wool pile Specifications: Type: Buffers & pads Box Dimensions: 2"H x 9"W x 9"L WT: 0.4 lbs UPC: 075929701468

Read more less