Boat Outfitting

Vinyl Coat™ - Light Grey - 12ozMarine Vinyl Coat is a line of flexible aerosol coatings to match, restore or change the color of most marine vinyl and plastic surfaces. Features: Covers stains, fading and prepped mildew Superior adhesion Outstanding UV protection  Stays flexible, will not crack Excellent hiding  Quick drying Applications: Vinyl Plastic marine surfaces Quick Guide (pdf)Brochure (pdf)

Read more less

Poly Rail Mount Motor Bracket - WhiteInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

BOLT 18x12 Electric Trim Tab System - Control Switch Required Electric Trim Tab Systems For Trailered BoatsBoaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for: Trailered boats from 17-28 feet Single actuator use, due to the inability to synchronize two electric actuators on the same tab Features: Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment Robust, water-tight black nylon actuator provides trouble-free operation Main seal located high to protect against marine growth and water intrusion failures Quieter than any other system on the market - No more scaring the fish away! Installation is fast - no need to disassemble parts of the actuator Controls sold separately  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Actuator Type: Electro-Mechanical Box Dimensions: 5"H x 15"W x 25"L WT: 25 lbs UPC: 666285600054 Owner's Manual (pdf)

Read more less

Poly Rail Mount Motor Bracket - BlackInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Tube Rail Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Medium table is 20" wide by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible knife and pliers holders, large table features additional hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 20" Box Dimensions: 3"H x 17"W x 21"L WT: 6.6 lbs UPC: 035514326780

Read more less

Boat Hook Three Sided Bristle Brush - Stiff Bristle These three-sided bristle brushes fit all Sea-Dog® boat hooks and all universal threaded devices. Stiff bristles are effective for jobs below the waterline, teak and other tough cleaning jobs. Side bristles make it easy to clean in hard to reach places. 10-1/2” head is longer than industry standard covering a larger cleaning area. Universal/Acme ThreadWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 5"W x 11"L WT: 0.65 lbs UPC: 035514491877

Read more less

Boat Hook Silicone Squeegee Heavy duty silicone blade provides a wide (12”) coverage area to easily clean and clear any type of window or marine surface. Comfort grip allows for manual use or attach to any Sea-Dog® boat hook and all universal threaded devices. Universal/Acme ThreadWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 6"W x 14"L WT: 0.65 lbs UPC: 035514491907

Read more less

Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - E1-1014 - 3-Blade - 10.38" x 14 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Diameter (Inches): 10-3/8" Material: Stainless Steel Pitch: 14 Box Dimensions: 7"H x 12"W x 12"L WT: 8.2 lbs UPC: 652480200939 Quick Guide (pdf)Brochure (pdf)

Read more less

30 AMP SmartPlug/Twist Type Cordset w/Black Inlet Cover- 50'For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 50' Cordset Color - Orange Inlet Color - Black Boatside Connection - 30 AMP/125 V SmartPlug Dockside Connection - 30 AMP/125 V Twist Type Plug In the Box: 50' Cordset Inlet cover Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30 Length: 50' Type: Cordset Voltage: 125 Box Dimensions: 5"H x 13"W x 14"L WT: 15.6 lbs UPC: 614458746191 Owner's Manual (pdf)Brochure (pdf)

Read more less

Multi-Surface Cleaner - 16oz303 Multi-Surface Cleaner quickly removes even the most stubborn spots from coffee, oil, grease and ink from virtually any material or surface.  This all-in-one cleaning solution can be used on everything from vehicle interiors to RV awnings to car covers. Safe to use anywhere in your car, motor home or other places where vinyl, fabrics and surfaces are in need of an intensive cleaning. Features: Effective surface cleaning stain removing formula All in one cleaner with ultimate cleaning power with no greasy residue Leaves surfaces looking new with no streaks left behind Designed for all water-safe materials Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including 1, 4-Dioxane,Ethylbenzene which are known to the State of California to cause cancer, and di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: All Purpose Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 082043304451

Read more less