Boat Outfitting

Trapez Polishing Pad - Fine Cut - 150mm *2-PackRecommended for use in combination with DiTEC Fine Cut Polish. For use with (DA) oscillating machines. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. It can also be used in other combinations, such as with Hologram Remover or Medium Cut. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 850019168310

Read more less

Elite Boat Wash - 32ozDiTEC's Elite Boat Wash offers superior penetration and removal of soot, salt, stains, dirt, oil, and other contaminants. Its advanced surfactant chemistry provides exceptional cleaning power and lubrication for physical agitated cleaning. One gallon of concentrate makes 128 gallons of boat wash.Readily biodegradable, true pH-neutral concentrate. Safe for all exterior surfaces, including ceramic-coated and waxed boats. Highly concentrated, gel productSuper sudsy formulaSafe to rinse into all waterways. Dries streak-free. One gallon of concentrate makes 128 gallons of boat wash, MARPOL-compliant and classified as ‘not a marine pollutant’Use & Application:For use on: All painted, ceramic, gelcoat, plastic, fiberglass, rubber, silicon, teak decks, and all polymer surfaces. Clean surface with a soft brush or wash mitt.Environmental Impact:MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Contains no propylene glycol, does not contain formaldehyde, and does not contain glycol ether. Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.25 lbs UPC: 850019168792 Quick Guide (pdf)

Read more less

Polishing Compound - Fine Cut - 32ozThis advanced fine cut, anti-hologram polish removes polishing haze and swirl marks for a 100% hologram-free finish. Featuring next-gen, self-grinding alumina abrasives, it's safe for all paint types - fresh, cured, and scratch-resistant. Water-based, silicone- and solvent-free.Features: Effectively removes holograms Free of solvents and silicone Appearance: Cream/Paste Solubility: N/A pH: 8 Use & Application:For the DiTEC Fine Cut Compound, we recommend using the DiTEC Red Trapez foam polishing pad.Application: Apply a sufficient amount of the polishing compound to the polishing pad or to the painted surface. Spread the compound at a low speed (about 1000 rpm) on the defect and at about 1600 rpm using moderate pressure. Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.35 lbs UPC: 850019168440 Brochure (pdf)

Read more less

METALON PX Multi Surface Metal Cleaner & Polish - 8ozDiTEC's METALON PX is an all-in-one cleaner, polisher, and protectant that is safe to use on all metal surfaces, including your stainless steel, brass, chrome, and silver. METALON PX cleans the surface and leaves a protective coating to prevent rust and corrosion, as well as reduces dirt adhesion. All-in-one, one-step marine metal treatment Applies and removes easily, requiring minimal effort for timely and efficient job completion Cleans the surface and leaves a protective coating to prevent rust and corrosion Appearance: Beige viscous liquid Solubility: 100% in water pH: 2.2-2.8 Use & Application:For use on: Stainless steel, aluminum, chrome, brass, silver.Application: Apply with a microfiber or cotton cloth and polish metal thoroughly.Environmental Impact:MARPOL Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No ammonia, and Does not contain kerosene. Specifications: Type: Metal Box Dimensions: 2"H x 2"W x 8"L WT: 0.7 lbs UPC: 850019168105 Quick Guide (pdf)

Read more less

Trapez Polishing Pad - Medium Cut - 150mm *2-PackIt can be used in other combinations, such as with Heavy or Fine Cut, depending on the situation. Good for finishing work after heavier corrections.For use with (DA) oscillating machines.Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 850019168327

Read more less

Trapez Polishing Pad - Heavy Cut - 150mm *2-PackIt can be used as a one-step choice in the correct combination of polish and matched to paint hardness. For use with (DA) oscillating machines. Recommended for use in combination with Ditec Heavy Cut polish. It can also be used in other combinations, such as with our Medium Cut. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes as a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.15 lbs UPC: 850019168334

Read more less

PROTEC1 Ceramic Alternative/Paint Protectant - 100ml (3.2oz)DiTEC PROTEC 1 is a premium one-step resin coating for boats and cars. Unlike wax or ceramic, it won’t crack—it flexes with your paint or gelcoat. This non-ceramic, SiO2-free formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size.Performance/Protection: Provides up to one year of protection on paint/gelcoat (1.5-3 years if supplemented with Quick Coating every 60-90 days), non-skid surfaces: up to one year, metals: 3-6 months, isinglass: 6-12 months.Features: Creates a strong protective shield with great hydrophobic properties Offers great protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Excellent protection for non-skid surfaces Makes maintenance much easier, reducing cleaning time by 50% Can be used and applied by any applicator, regardless of experience level (when used as directed) Coverage: 1.6 oz (50 ml) bottle covers approximately a 15-20 ft. boat, or standard-sized automobile or pick-up truck. 3.2 oz (100 ml) will cover a 30-40 ft. boat. Non-skid surfaces will require more product than smooth surfaces Appearance: Clear colorless Solubility: 100% in water pH: N/A Use & Application:For use on: Paint/gelcoat surfaces, metal, non-skid, and glass surfaces.Application: For best results apply PROTEC 1 coating at room temperature. Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 7"L WT: 0.65 lbs UPC: 850019168525 Quick Guide (pdf)

Read more less

Trapez Polishing Pad - Medium Cut - 175mm *2-PackIt can be used in other combinations, such as with Heavy or Fine Cut, depending on the situation. Good for finishing work after heavier corrections.For use with (DA) oscillating machines.Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168365

Read more less

G200 Glass Polishing Compound - 16ozDiTEC's G200 is a cerium oxide-based glass polishing product that blends ceramics with mild abrasives and other nano components to create an extremely user-friendly and effective product. When used with a glass polishing pad, it quickly removes water spots and other stains. G200 can also remove fine-to-medium wiper scratches and swirls without distorting or warping the glass like traditional cerium oxide compounds.Features: Removes surface contamination and minor scratches from glass surfaces Appearance: Clear liquid Solubility: 100% in water pH: N/A NOTE: A dual action or forced rotation polisher is highly recommended when using this product. An RPM speed of 320-420 is suggested, but may vary based on type of glass product is being applied to, in addition to the type of pad being used.Use & Application:For use on: Glass, ceramic, stone and tile.Application: Apply using a microfiber applicator pad or rayon glass polishing pad. Polish glass thoroughly to remove all staining, etching and mineral deposition. Specifications: Type: Glass Box Dimensions: 3"H x 3"W x 8"L WT: 1.25 lbs UPC: 850019168068

Read more less

Trapez Polishing Pad - Heavy Cut - 175mm *2-PackIt can be used as a one-step choice in the correct combination of polish and matched to paint hardness. For use with (DA) oscillating machines. Recommended for use in combination with Ditec Heavy Cut polish. It can also be used in other combinations, such as with our Medium Cut. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes as a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168372

Read more less

PROTEC1 Ceramic Alternative/Paint Protectant - 50ml (1.6oz)DiTEC PROTEC 1 is a premium one-step resin coating for boats and cars. Unlike wax or ceramic, it won’t crack—it flexes with your paint or gelcoat. This non-ceramic, SiO2-free formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size.Performance/Protection: Provides up to one year of protection on paint/gelcoat (1.5-3 years if supplemented with Quick Coating every 60-90 days), non-skid surfaces: up to one year, metals: 3-6 months, isinglass: 6-12 months.Features: Creates a strong protective shield with great hydrophobic properties Offers great protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Excellent protection for non-skid surfaces Makes maintenance much easier, reducing cleaning time by 50% Can be used and applied by any applicator, regardless of experience level (when used as directed) Coverage: 1.6 oz (50 ml) bottle covers approximately a 15-20 ft. boat, or standard-sized automobile or pick-up truck. 3.2 oz (100 ml) will cover a 30-40 ft. boat. Non-skid surfaces will require more product than smooth surfaces Appearance: Clear colorless Solubility: 100% in water pH: N/A Use & Application:For use on: Paint/gelcoat surfaces, metal, non-skid, and isinglass surfaces.Application: For best results apply PROTEC 1 coating at room temperature. Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 850019168518 Quick Guide (pdf)

Read more less

Female Quick Connect with CapThe standard connector that comes with every FatSac ballast bag and allows you to connect various FatSac Quick Twist adapters.  Fitting system comes with the Quick Twist adapter and the Quick Twist Cap connected together for ease of use.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac ballast bag a quick and simple task.  No more struggling with old waterbed valves and water spilling inside the boat.  Simply twist, pull, replace and you're ready to go! Features:Sac valve threads*Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 817177021352 Brochure (pdf)

Read more less