Boat Outfitting

Quick Wax®16ozThe spray wax method can quickly add protection and gloss to large surfaces typical on boats and RV's. Whether the surface is wet or dry, this specialized formulation will create a brilliant gloss while adding wax protection. Suitable for use on fiberglass, painted surfaces, stainless steel, and clear plastics. *Use wax only after surface has been cleaned & restored to a "like new" or "average" finish.Benefits Utilizes the highest grade of carnauba to protect all paint surfaces Effortless application and wipe-off in full sun Long-lasting protection Product can be applied by hand Prevents aging and protects surface from contaminants Protects against UV damage and browning VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 10"L WT: 1.3 lbs UPC: 070382159160

Read more less

Soft-Mate Can and Air Horn HolderFeatures: Perfect size for beverage cans, hand held air horns Flexible P.V.C. Includes mounting screws Height: 3-2/2" (8.9cm) Width: 4" (10.1cm) Diameter: 2-3/4" (7.0cm)

Read more less

Elastometric 3 oz (89ml) Sealant Tube - ClearA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Primer-206 G+P Black 250ml BottlePigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes.  Features: Enhanced adhesion on a wide variety of substrates Easy to apply Usage:Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces, and some plastics and metals.Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

Cleaner Wax - Paste *Case of 6*Meguiar’s versatile, one-step wax is specially formulated to produce eye-dazzling results on all finishes. Rich conditioning oils with gentle cleaning ability make it an excellent choice for daily drivers exposed to the elements.Features: Cleans your paint while you wax Rich conditioning oils polish & protect Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 5"W x 5"L WT: 5.4 lbs

Read more less

BPO Cream Hardener White 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures.

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Bubble Gum Micro Polish + High Gloss Polymer - QuartThe micro-polish will remove fine swirls and light oxidation, and the high-gloss polymer protectant will deliver a super shine and extreme durability. For best results, use a rotary machine with a yellow polish pad or random orbital polisher and finish with a topcoat of Smoove White Cloud.Features:It contains a micro-polish with a high-gloss polymerSpecifications:Size: Quart Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 9"L WT: 2.3 lbs UPC: 794811504603

Read more less

Teak Brite® Powder Cleaner - Jumbo - 64ozOne-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready for teak oil sealer application. Designed for decks, swim platforms, furniture and horizontal surfaces. Specifications: Type: Teak Box Dimensions: 5"H x 5"W x 9"L WT: 4.15 lbs UPC: 020537011850

Read more less

Force®/Force® Kraken Anode KitUse this to replace the anode included with the Force trolling motor.

Read more less

48” Routed Ruler - 6mm - Brushed Texture - Storm Grey/BlackThe SeaDek 48 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Storm grey/black Overall Dimensions: 4″ x 50″ Material Thickness: 6mm Texture: Brushed

Read more less

14” x 36" 20mm Dual Density Small Teak Helm Pad with SeaDek Logo - Brushed Texture - Gray/Black (355.6mm x 914.4mm x 20mm)SeaDek's softest, most comfortable SeaDek Helm Pad yet! Dual-Density Helm Pads are the perfect way to add extra comfort and protection to a boat’s helm. Featuring an ultra-comfortable, low-density 17mm foundation with SeaDek's legendary standard 3mm brushed top layer for traction and durability, no boat is complete without this essential addition. SeaDek helm pads utilize a robust adhesive for an easy peel-and-stick installation and are sure to be a go-to anti-fatigue pad for longer and more comfortable days on the water.Features: Teak style Absorbs impact Protects the knees and backs of boaters Specifications: Style: Teak (classic teak look, but with the comfort of SeaDek) Color: Storm Gray/black Overall Dimensions: 14″ x 36″ (355.6mm x 914.4mm) Material Thickness: 20mm Texture: Brushed

Read more less