Boat Outfitting

Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes.  Opens to service deck plates or strainer caps with key holes up to 7" apart.  Hangs conveniently near the strainer(s) location.   C83600 bronze

Read more less

Female Quick Connect with CapThe standard connector that comes with every FatSac ballast bag and allows you to connect various FatSac Quick Twist adapters.  Fitting system comes with the Quick Twist adapter and the Quick Twist Cap connected together for ease of use.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac ballast bag a quick and simple task.  No more struggling with old waterbed valves and water spilling inside the boat.  Simply twist, pull, replace and you're ready to go! Features:Sac valve threads*Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 817177021352 Brochure (pdf)

Read more less

12" Straight Trolling Motor Plate for Garmin Force® KrakenThe Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate is designed for the Garmin Quick Release Plate System. It offers a robust, reliable solution for installing any Force Kraken Trolling Motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications:Size: 12” x 8” x 1/2”Recommended Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate designed for the Garmin Quick Release Plate System.

Read more less

BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The BPS-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Universal Flush Mount Frame for NRX50S Compressor Refrigerators - Stainless SteelA universal stainless steel flush mount installation frame for the Dometic™ NRX 35S, and NRX 50S fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 20"W x 24"L WT: 6.25 lbs UPC: 6975399592594

Read more less

Generation 2 Single Joystick Thruster ControllerLewmar’s range of thruster controls provides superior tactile control of single or dual thruster installations. The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws.  A cover is also included, providing additional security against accidental use and giving extra environmental protection.  If replacing a previous generation touch panel, joystick panel, or dual joystick panel, the existing mounting hole and fixing screw positions can be reused. Compatible with:Lewmar TT, RT, SRT & VRT thrusters are fitted with a blue box and can be fitted to thrusters fitted with a black box using a controller adapter.*Requires Lewmar connecting cable.Features: The ergonomic control ‘pad’ gives tactile feedback  Membrane switch panel sealed from dust and moisture ingress  Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions.  Fit existing cut-out of Lewmar joysticks  Removable cover  Technical Specifications: Power - 12/24 Volt DC Cut-out - 2.5" Diameter *Sold as an Individual Owner's Manual (pdf)

Read more less

Trolling Motor Propeller Cover- 2-Blade Cover - 12"- RedExtend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy-duty marine grade vinyl.One-year warrantyWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 13"L WT: 0.75 lbs UPC: 040011807878

Read more less

Medium Center Console Cover - Vinyl WhiteKeep your seats and consoles from cracking and fading! Boat seat and consolecovers are designed to protect your seats from damaging ultra-violet rays,wind, mildew and water. All Covers fold easily for storage and keep yourseats cool and clean!Dimensions: 44"H x 40"W x 30"DFeatures: Mildew and water repellant UV Protection Waterproof Air vents Heavy duty Drawstring hem Specifications: Color: White Cover Type: Console Box Dimensions: 3"H x 10"W x 14"L WT: 3.4 lbs UPC: 040011114877

Read more less

Charlevoix® Flag Clip For 7/8" - 1" PoleThe original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi-permanently to your pole and will keep your flag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired. Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 040011579287

Read more less

12" x 18" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954183

Read more less

16" x 24" Deluxe Sewn US Yacht Ensign FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011951243

Read more less

E3 Pencil Zinc w/Brass CapLength: 2.00"Diameter: 0.75" Specifications: Material: Zinc Box Dimensions: 1"H x 1"W x 3"L WT: 0.5 lbs UPC: 8059617819101 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less