Electrical - Accessories

Original Equipment Quality Replacement Solenoid for BRP-OMC & Evinrude E-TECReplacement solenoid that will fit BRP-OMC, EVINRUDE E-TEC, 2010-UP 15 HP-300 HP.Replaces:BRP-OMC 587020*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1810Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800 - can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Flip Pro Multi - Dual USB-C & 12V Power SocketCombining the features of the high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution.When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Electrical Information: 120 -150W max power (12V system only) Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Quick Guide (pdf)

Read more less

MasterBus Cable - 6MSuitable for data traffic and powering peripheral equipment in harsh environments, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface. A DIY kit is optional. Brochure (pdf)

Read more less

PowerCombi Remote Control PanelControl and monitor your PowerCombi inverter/charger via this easy to use remote monitor.The LCD display is used for setting up the inverter/charger operation, as well as viewing current status of fault messages.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required. 97 decibel output at 9 Volts Frequency 2.8 KHz Voltage 5-20 Volts (Suitable for use with 701-MDCZ battery switch) on 24 volt systems) Power consumption 12mA at 12 Volts WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Universal Plug Holder - WhiteFeatures: White AC Universal Plug Holder is designed for all standard 120V AC plugs Plug clamp insert included - converts plug holder to an AC inlet for battery chargers No cutting, stripping, or rewiring of AC power cord Watertight and UV resistant cover Stainless steel mounting screws included Easy to reach safe AC power cord connections

Read more less

4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini VoltmeterEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness.  Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

1811Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

ERC-12-15 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power supply to act as a “trickle” battery charger without any additional modification.When loss of DC voltage is sensed by the ERC, it employs a fast-acting S.P.D.T. relay to automatically switch the equipment’s DC input over to a standby battery to allow continued operation. When the power supply is returned to service, the ERC disengages the battery and puts the supply back online to provide DC voltage. While the power supply is operating normally, a small portion of the output current is directed to the battery to trickle-charge and maintain it at full voltage. (Note: Battery float voltage will be maintained at .7 volts lower than the power supply voltage.)Note: If the power supply is down for an extended period, the backup battery may become significantly discharged while powering the radio. When the supply returns to service, the trickle charge rate of the ERC may be insufficient to restore the battery to full charge in a timely manner. In the event this occurs, a supplemental charger may be necessary to bring the battery to full charge.InstallationSelect a suitable location as close to the battery as possible where there is no likelihood of accidental contact and shorting of the terminals. The ERC may be mounted vertically, horizontally, or even upside-down, if necessary, without affecting its operation. Two # 10 sheet metal or wood screws will be needed. Mounting on a metal surface is acceptable as the inputs and outputs are isolated from the mounting bracket.Note: If the battery is stored in an unventilated enclosure, it is not recommended that users mount the ERC within the same enclosure. As with any relay, it should not be in an area where there may possibly be battery gases or any other potentially explosive gases present.WiringThe wiring should be as direct as possible. Ensure that the battery posts are free from corrosion. Determine the correct gauge wire using the information below. The wire length is the total length of the run (ERC-to-Radio + Power Supply-to-ERC) or (ERC-to-Radio + Battery-to-ERC), whichever is longer. 5 ft. wire length = #14 AWG 10 ft. wire length = #12 AWG 15 ft. wire length = #10 AWG 20 ft. wire length = #10 AWG Use the provided crimp ring lug connectors to secure wiring to the ERC. Models ERC-12-15 and ERC-24-15 are provided with yellow plastic terminal covers, which must be reinstalled after wiring to prevent accidental shorting.Specifications: Input Range: 10.0-14.5 VDC (12V) Relay Rating: 10 amps continuous & 15 amps intermittent Float Trickle (typical): 0.1 amps Dimensions (inches): 5-1/8" x 2-7/8" x 2-3/8" Weight: 0.5 lbs. Owner's Manual (pdf)

Read more less

Round USB & USB-C Power Plug with VoltmeterUSB 3.0 & USB-C Power Plug with Volt Meter charges two devices simultaneously while the LED screen displays voltage status. Can be used on a boat, car, or RV. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Features:  This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle Constructed of aluminum and injection molded nylon Blue LED display FCC, CE, RoHS compliant Specifications: Output DC: 5V/6A  Input: 8-32VDC  USB-C Watts: 60W@24V  USB 3.0 Watts: 36W@12V Plug-In Side Diameter: (inch) 1-1/4" Length: (inch) 2-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Power Socket & CapStamped Brass/Injection Molded Nylon & ABS. Power Socket with Plug easily adds 12V power almost anywhere. Constructed of injection molded nylon and ABS socket with stamped brass plug contacts. Installs with two #8 FH fasteners (not included). Maximum: 12VDC, 16A. Cap and plug may be included or sold separately. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less