Mercury/Mariner Outboard Relay with Shroud & GrommetMercury/Mariner outboard relay that will fit Mercury & Mariner Outboards. 12 Volt, 30 AmpReplaces:Mercury Marine 828151Mercury Marine 828151A1Mercury Marine 882751A1*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Parts
Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs
UPC: 693006009575
12V Stainless Steel Power SocketThe power socket with the plate is ideal for installing additional power outlets. Features:
Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate
Installs with two #8 RH fasteners (not included)
Specifications:
Maximum: 12VDC, 16A.
Socket Material: Stainless steel socket and molded cap
Distance Between Mounting Holes: 1-11/16 in.
Height (not including the plate): 1-1/8 in.
Fastener: #8 RH
Weight: .12 lb.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
CKM12 Keypad with CKM to NMEA 2000® Adapter Cable - 0.2MThe CKM12 is a customizable keypad featuring laser-etched legends and LED function lights for each button. The LEDs also provide diagnostics when fault conditions are detected.With the rugged mechanical packaging (IP69K), the CKM12 can be installed inside or outside the cabin. The low-profile design offers a seamless dashboard look, and it can be mounted either vertically or horizontally.The CKM12 offers significant advantages over traditional electromechanical switches, such as a longer actuation cycle (1,000,000), reduced wiring harness, and reduced installation time. The CKM12 is sold off the shelf in two configurations and includes a CKM to NMEA 2000® Adapter Cable.The CKM12 is sold off the shelf in two configurations of legends. Consult the factory for additional options and minimum quantities for customization.Features:
NMEA 2000® CAN Protocol
IP69K Front Panel Sealing Protection
Configurable
Diagnostic Feedback
Standard or Custom Etched Legends
1,000,000+ Button Actuation Cycles.
Low Current Switching
Tactile and Audible Feedback
Circle on buttons
Applications:
The dimmable button switches on the CKM12 are programmable to control any Maretron digital switching loads
Can be paired with third-party systems using the NMEA 2000 standard PGN 127501 Binary Status Report
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Ventura Series 12V Power OutletThe Ventura Series 12V Power Outlet is here to power your adventures, delivering a compact, clean, unified look for your exterior connections.Working seamlessly with the rest of the Ventura Series, integrating power, water, solar, and more into a single, cohesive design language.Power Up Your Outdoor AdventuresWith its compact, rugged design, the Ventura 12V Power Outlet makes it easy to plug in portable tire compressors, cool boxes, inverters, and more, wherever your journey takes you. Whether you're at the beach after an epic surf session or in the mountains after a thrilling trail ride, you’ll always have reliable power at your fingertips. Just park, lift the waterproof lid, and plug in. It’s that simple.Built for DurabilityDesigned with Scanstrut's renowned marine engineering expertise, Ventura outlets are rigorously tested for UV exposure and waterproofing. Featuring marine-grade 316 stainless steel components, they deliver long-lasting performance in the harshest environments.InstallationStandard 32mm (1.25”) holesaw installationFeatures:
IP68, IP69K Waterproof (with lid closed)
Premium click-to-close design
Spring-loaded lid
Marine-Grade 316 stainless steel hardware
Built-in gasket for a watertight seal
Easy install
Specifications:
Input Voltage (12V System Only): 10-15V DC
Input current max: 10A
Output Max: 150W
Standby Draw: 0.01W
Waterproof Rating: IP68, IP69K Front only when lid closed
Certification: CE, ROHS, WEEE
Specifications:
Type: Electric
Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs
UPC: 5060114799462
Quick Guide (pdf)Brochure (pdf)
Temperature Sensor for PowerCombiMastervolt Temp Sensor specifically for PowerCombi.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Contura Single Switch Mounting BracketOne end section. Modular design permits assembly in groups - can be used with part number 1001702.Features:
Used with Rocker Switches and Contoura Switches
Same as Cole Hersee part number 82159-1
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Piezo Buzzer, 30mm 5-30V 85DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a single tone alarm is required.
85 decibel output at 9 Volts
Frequency 3.5KHz
Voltage 5-30 Volts
Power consumption 9mA at 12 Volts
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Double AC ReceptacleThe TWPD is an AC receptacle with dual integrated extension cables, providing maximum flexibility and easy installation. Designed for exterior mounting on any vehicle, it enhances access to the charging port. Built with heavy-duty 14 AWG wire, the TWPD delivers reliable power, rated at 15 amps and 125 volts for optimal performance.
Single AC ReceptacleThe TWPs is an AC receptacle featuring a built-in extension cable for maximum flexibility and easy installation. Designed for exterior mounting on any vehicle, it enhances access to the charging port. Built with heavy-duty 14 AWG wire, the TWPD delivers reliable power, rated at 15 amps and 125 volts for optimal performance.
MEGA Fuse 80A/80V (Package of 5 Pieces)Victron Energy supplies a range of fuse holders and fuses to suit a wide range of installations, and the MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of ceramic Victron MEGA fuses contains FIVE 80 AMP fuses.Features:For 80V productsSpecifications:
Max Current Rating: 80 AMP
Max Voltage Rating: 80V
Lanocote Rust & Corrosion Solution - 8 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features:
Prevents Thread Freeze-up
Combats Galvanic Reaction of Dissimilar Metals
Seals Porous Surfaces
Neutralizes Acids, Alkalies, & Salts
Prevents Corrosion on Electronic Contacts
This product is flammable. Specifications:
Type: Corrosion Protection
Box Dimensions: 1"H x 3"W x 8"L WT: 1 lbs
UPC: 028026188038
Dual XD Flex 2 - Relay/Relay with KnobsFeatures:
Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware.
Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions)
Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.
35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts.
Plug & Play Compatible with Legacy Competitor Products: Single, dual, and triple relays options available with DTM/ATM connectors, pin for pin compatible with ML Series Bi-stable Relays.
90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality.
Applications:
Replaces Two Individual High Amp Relays with One Compact Module, reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear, unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into..
Designed to Replicate Common Multi-Battery Switching and Charge Management Functions: Common dual battery load switching via the outer relays and a central automatic charging relay to share charge current is easily implemented.
Multiple Automatic Charging Relay (ACR) Into One Device: For 2-3 Battery Systems that require 1 or 2 ACRs, a single three-relay ACR provides drastic improvement in off-state quiescent current draw, space used, and reduces unnecessary interconnection cables..
Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories.
Specifications:
Type: Electric
Box Dimensions: 3"H x 4"W x 8"L WT: 2 lbs
UPC: 850035199534