Electrical - Accessories

400A Inverter Installation Kit f/3500W InverterSamlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.Specifications:Input: 2500-3500 Watts / 5000-7000 WattsOutput: 12 V / 24 VAmps: 400 AmpsFuse: 400 AmpsWeight: 17.5 (lbs)Weight: 7.93 (kg)Dimensions: *comes with 10ft of cable x 2Warranty: 2 Year LimitedApplications:The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

ROKK 10W Waterproof Wireless Charger - HiddenThe IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 5060114798045 Quick Guide (pdf)

Read more less

4367 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 3x Blank AperturesEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.Tank levels can be read out locally in the system, see screenshot, as well remotely through our VRM Portal.The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required.Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that.Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5 V.To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

VE Direct Cable - 10MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.  Quick Guide (pdf)

Read more less

Red 16 AWG Wire Ferrule - 8mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 16 Insulation Color: Red Ferrule Length: 8mm (0.31 in.) Stripping Length: 10mm (0.39 in.) Quick Guide (pdf)

Read more less

APS-160 Automatic Power Selector - 160AThe Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, and the operation continues uninterrupted.Two independent power sources are wired to the APS and routed as a single output to the vital load. Alarm sense wires can be easily attached to input studs, providing a loss of power source signal. Features: Easy installation Rugged, rust-proof anodized aluminum case Specifications: Max Loads: 160 amps Voltage Rating: 6 – 50 VDC, neg. ground Stud Terminal Size: 6mm Dimensions (inches): 9.0 x 4.5 x 3.1 Weight (lbs): 5

Read more less

ROKK 10W Catch Waterproof Wireless Phone Charging MatCatch 10W is one of the most convenient ways to store and wirelessly charge your phone onboard indoors or out! Designed to install onto any flat surface, perfect for use on top of boat consoles.Place your phone onto the center of the charging mat and start wirelessly charging.The cleverly designed edging bumpers stop your phone from sliding out, and lets the mat Catch your phone from any angle!Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up. The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables.Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up.  The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. Simple Install with one easy cut (2.5” (65mm) hole saw) into your chosen mounting location, then peel off the 3M self-adhesive backing paper and firmly press down.  Connect to a 12/24V power source.  The catch is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: - 2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging mat Wireless charger Instruction manual *Sold as an Individual  Specifications: Type: Chargers Box Dimensions: 2"H x 5"W x 8"L WT: 0.4 lbs UPC: 5060114798038 Quick Guide (pdf)

Read more less

Flip Pro with Front Fit Bezel 12/24V Fast Charge Dual USB-A/C SocketUltra-fast USB charging for the next-generation boater. Flip Pro is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard.Ultra-fast USB charging for the next-generation boater. Flip Pro with a front bezel is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.Flip Pro with front bezel was manufactured as an adaption to the original SC-USB-F1 to offer flexibility to installation, as in some cases, it is not possible to gain access to behind panels. Therefore, the front fit bezel provides an alternative route for installation, allowing the option to fit the product from the front using screws.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.Featuring a super compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.Flip Pro is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.Universal: Universal fit for any USB-A or USB-C connectors. Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof:IPX4 waterproof with the cover closed.Marine Ready: Internal anti-corrosion protective coating UV resistant 316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended)  Standby power draw: 0.01W USB – C output:  60W max on 24V system 36W max on 12V system USB – A output: 36W maxThe charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. What is USB-C? More powerful - Our USB-C has no problems charging even the largest iPad Pro at twice the speed as a USB-A. More Compact:The slim, oval shape is smaller than USB-A and is also symmetrical and reversible - no more having to flip the cable over to get it into the port!More Flexible:It’s fast becoming the universal connector/charge type on all devices, replacing the USB-A, USB-B, and Micro-USB. New devices are being launched with this charge option only e.g. iPhone 13.

Read more less

TouchView Controller for Dolphin Charger PROThe TouchView lets you view operations and access remote charger setting menus. The color touch screen provides an intuitive selection of measurements (amperage, voltage, charge percentage), charging phases (boost, absorption, float), and allocated available power and possible operation faults.Features: Color touchscreen measurements: voltage, amperage, charging mode, and operating parameter settings Anomaly display: battery voltage too low, internal temperature too high, fuse Operation log Fault and alarm display (activation of relays or not) Communications protocol: CAN bus Connection via an RJ11 plug External diameter 3-5/8" (chrome plated trim), mount using 4 screws. Can be mounted on front panel of Pro chargers. Works with Pro and 12V-60A, 24V-30A Premium chargers.

Read more less

1014 Mounting Bracket f/1011 12V SocketSocket not includedFeatures: Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system - plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Battery Switch Key Lock Replacement - BlackReplacement Key Lock for Battery SwitchWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less