Electrical - Battery Chargers

TRUEcharge™3 20A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 20 A  Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 40 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb)  Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 13"L WT: 5.95 lbs UPC: 715535920777 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Orion-TR Smart 12/12-30A (360W) Isolated DC-DC Charger or Power SupplyThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.Bluetooth Smart Enabled Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product Fully programmable Battery charge algorithm (configurable) or fixed output.  Smart Alternator Compatibility: engine running detection mechanism Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged For lithium batteries, the absorption time is fixed; the default is 2 hours Alternatively, a fixed output voltage can be chosen Suitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).Remote On/OffA remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.High Temperature ProtectedThe output current will reduce at high ambient temperatures.IP43 ProtectionWhen installed with the screw terminals oriented downward.Screw TerminalsNo special tools are needed for installation. Input fuse (not replaceable) *Input fuse (not replaceable) Specifications: Input Voltage Range: 10-17 V Under Voltage Shut Down: 7 V Under Voltage Restart: 7.5 V Nominal Output Voltage: 12.2 V Output Voltage Adjust Range: 10-15 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 30 A Maximum Output Current (10 S) at Nominal Output Voltage minus 20%: 40 A Short Circuit Output Current: 60 A Cont. Output Power at 25 Degrees C: 430 W Cont. Output Power at 40 Degrees C: 360 W Efficiency: 87 % No Load Input Current (2): < 80 mA  Standby Current: Less than 1A Can Be Used as Power Supply: Yes, output voltage can be set with Bluetooth  Galvanic Isolation: 200 VDC between input, output, and case  Operating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C)  Humidity: Max. 95 % non-condensing  DC Connection: Screw terminals  Maximum Cable Cross-Section: 16 mm²  AWG6  Weight: 1,8 kg (3 lb)  Dimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch)  Protection Category IP43 (electronic components), IP22 (connection area)  Safety Standards: EN 60950 Emission/Immunity Standards: EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Output - Amps: 30a Charger Input - Voltage: 12v Portable: No Charging Banks: 1 Charger Output Voltage: 12v Box Dimensions: 4"H x 6"W x 9"L WT: 4.45 lbs UPC: 8719076047698 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

PROLITE Series Dolphin Battery Charger - 12V, 25A, 110/220VAC - 3 OutputsDolphin Chargers are known as a yacht-quality product that is professionally designed and manufactured in Europe with the latest components to be more efficient and reliable than the competition. In 2019, Dolphin set out to create this line of small, water-resistant chargers with the same philosophy for the outboard and gasoline boat markets. The PROLITE chargers are smaller, lighter, and more efficient than the competition and boast the latest in connectivity with a standard Bluetooth interface. Features: The Dolphin Connect App (iOS and Android) will allow you to monitor and control your charger from your mobile device Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks 40% smaller and 50% lighter than most competitors Includes 6 ft. AC and DC cables and fusing 25 amp has 3 outputs IP 65 water resistant ISO-certified 8846 for use in gasoline boats Works with any battery technology on the market Will charge from 0 VDC Bluetooth interface Simple installation 92% Super efficient 12V - 25A Specifications: Charger Input - Voltage: 110/220v Charger Output - Amps: 25a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 4"H x 6"W x 16"L WT: 5 lbs UPC: 786142992259 Owner's Manual (pdf)

Read more less

Phoenix Smart IP43 Charger 12/50 (1+1) 120-240VAC Requires 5-15P Mains CordWith boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120/240v Charger Output - Amps: 50a Charger Output Voltage: 12v Charging Banks: 1+(1) Portable: No Box Dimensions: 6"H x 10"W x 11"L WT: 7 lbs UPC: 8719076053507 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SS3 Auto 3 Bank Battery Charger with 3 Bank B.O.S.This kit combines Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s SS3 Auto 30A - 3-Bank Lithium/AGM Battery Charger (PN: SS3AUTO).B.O.S. (Battery Optimization System) - 12V - 3-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features: Available in 6V, 8V, and 12V configuration Up to six batteries in a series Battery Selection and Prediction (BSAP-24) algorithm Less than 1mA sleep mode Transfer rate up to 7.5A Self-powered Any type of battery chemistry Used in Any Application Where Batteries Are in Series: Marine Golf Industrial Aerial Equipment Solar Power Electrical Vehicles Communications Defense/Military SS3 Auto 30A - 3-Bank Lithium/AGM Battery Charger Detects if a battery is Lithium or AGM Automatically charges both Lithium and AGM batteries for optimal performance Fully automatic. Completely and safely charges both Lithium and AGM batteries Algorithms designed and validated with battery manufacturers for a 100% charge The startup feature will wake up batteries that have turned off due to low-voltage protection Auto return to charging feature Quickest charge times in its class Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO® Features: Waterproof - Use on land and in fresh and saltwater TROUBLE-FREE—Just Plug It In and Forget It! Independent outputs Fully automatic/multi-stage charging On-board diagnostic codes FCC 15 Parts A & B interference compliant Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410) 3-Year Warranty AutoProfile Intuitive Charging Technology Lithium/AGMProfessional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.AutoProfile Intuitive Charging Technology provides flexibility for a charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 30a Charger Output Voltage: 12/24/36v Charging Banks: 3 Portable: No Box Dimensions: 3"H x 6"W x 9"L WT: 20 lbs Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

B.O.S. (Battery Optimization System) - 12V - 3-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruples run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features: Available in 6V, 8V, and 12V configuration Up to six batteries in series Battery Selection and Prediction (BSAP-24) algorithm Less than 1mA sleep mode Transfer rate up to 7.5A Self-powered Any type of battery chemistry Used in any application where batteries are in series: Marine Golf Industrial Aerial Equipment Solar Power Electrical Vehicles Communications Defense/Military This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Charge Mate Pro 40 - Electronics Charge RelayCurrent limited electronic charge relay with high efficiency and reverse current protectionA secondary battery on board requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro.A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips of the onboard electrical network.The Charge Mate Pro series consist of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications.Charge Mate Pro: for controlled charging from a single source.ApplicationsLeisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need of prioritised or current limited charging.Features Electronic charge coupling with very low voltage drop Makes effective dual charging possible Suitable for all battery types, including Lithium Ion Charge current secondary battery limited to 40 A High system reliability by prioritised charging of the main battery Unidirectional which blocks return current under all circumstances Prevents power dips of the onboard electrical network Suitable for all kinds of chargers and alternators Monitoring with LED status indication IP65 electronics in a corrosion resistant casing with aluminum heat sinks Fast and easy installation General specifications Remote switch functions:  on, off, auto, start assist Monitoring: LED (warnings and status indication) Output current: limited to 40 A Number of battery outlets: 2 Input voltage range: 9-32 V Parallel configuration: yes Battery voltage: automatic 12/24 V detection Dimensions, hxwxd: 157 x 140 x 80 mm / 6.2" x 5.5" x 3.1" Weight: 0.88 kg / 1.9 lb Approvals: CE Technical specifications Connection possibilities: 3 x fast-on connectors (switch, ground and status) o switch: for an optional single pole ON-OFF-ON switch for remote operation o status: for an optional LED indicator Power consumption: switch open: < 1 mA at 12/24 V DC Battery types: all types (Lithium Ion protection via Multi purpose contact, product code 77030500) Switch on voltage: 13.5 V (12 V) / 27 V (24 V) Switch on delay: 5 sec. Switch off voltage: 12.75 V (12 V) / 25.5 V (24 V) Switch off delay: 2.5 sec. Relay: electronically (mosfets with low voltage drop of max 0.2 V) Temperature range (ambient temp.): -40 °C to 60 °C -40 to 140 °F Protection degree: IP65 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Portable: No Charging Banks: 2 Charger Output Voltage: 12/24v Charger Output - Amps: 20a Charger Input - Voltage: 120v Box Dimensions: 7"H x 9"W x 16"L WT: 8.8 lbs UPC: 031669440203

Read more less

3 Bank On-Board Battery Charger - 12V - 30-AmpThe Pro-Guide PGC-310 is a 12V Lead Acid / AGM / Lithium on-board battery charger.Each Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 3 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A  x3 Length: 9.06" Width: 9.96" Height: 3.86" Weight: 15.9 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 30a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 8"H x 12"W x 14"L WT: 17 lbs UPC: 810145910764 Brochure (pdf)

Read more less

2 Bank On-Board Battery Charger - (1) 12V / (1) 24V - 20-AmpThe Pro-Guide PGC-1224 is a 12V Lead Acid / AGM / Lithium & 24V Lithium on-board battery charger.Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 24V Lithium Battery(s).Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V Lead Acid/AGM/Lithium & 24V Lithium Output Voltage: DC 12V x 1 & DC 24V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 28.8-29.2 for 24V Lithium Battery Output Current: 10A  x2 Length: 8.19" Width: 9.96" Height: 3.86" Weight: 14.3 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: (1)12v / (1)24v Charging Banks: 2 Portable: No Box Dimensions: 8"H x 11"W x 15"L WT: 14.7 lbs UPC: 810145910795 Brochure (pdf)

Read more less

1 Bank On-Board Battery Charger - 12V - 10-AmpThe Pro-Guide GPC-110 is a 12V on-board battery charger for lead-acid, AGM, and lithium batteries.Select one of three charge profiles.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure. With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A x 1 Length: 6.02" Width: 9.96" Height: 3.86" Weight: 9.5 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 10 amp Charger Output Voltage: 12v Charging Banks: 1 Portable: No Box Dimensions: 8"H x 8"W x 14"L WT: 9.9 lbs UPC: 810145910740

Read more less

1 Bank On-Board Battery Charger - 12V/16V - 10-AmpThe Pro-Guide PGC-116 is a 12V AGM / Lithium or 16V Lithium on-board battery charger.Select one of two charge profilesActivation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V AGM / Lithium & 16V Lithium Output Voltage: DC 12V/16V x 1 Max Output Voltage: 14.3-14.7 for 12V AGM Battery, 14.4-14.7 for 12V Lithium Battery, & 18-18.3 for 16V Lithium Battery Output Current: 10A  for 12/16V Bank Length: 6.02" Width: 9.96" Height: 3.86" Weight: 9.9 lbs IP Rating: 68 Brochure (pdf)

Read more less