22mm Push Button Switch - Off/(On) Momentary Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off/(On)" momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-(On) (momentary contact)
Off/On: Blue/red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: OFF/(ON)
Color: Blue/Red
Box Dimensions: 1"H x 1"W x 1"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Nav/Anc Contact - Blue/Green/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a “Nav/Anc" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Nav/Anc
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: White dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: OFF/ON/ON
Color: Blue/Green/Red
Box Dimensions: 1"H x 1"W x 1"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/On Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question. Features:
1 ft. lead
4-wire harness
Rear Mark Page: Red dot
Specifications:
Function: Off-On (standard contact)
Off/On: Blue/red
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: OFF/ON
Color: Blue/Red
Box Dimensions: 1"H x 1"W x 1"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/(On)/(On) Double Momentary Contact - Blue/Green/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off-(On)-(On)" double momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-(On)-(On) (double momentary contact)
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: OFF/(ON)/(ON)
Color: Blue/Green/Red
Box Dimensions: 1"H x 1"W x 1"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/On/On Contact - Blue/Green/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off-On-On" standard contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-On-On (standard contact)
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: Blue dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: OFF/ON/ON
Color: Blue/Green/Red
Box Dimensions: 1"H x 1"W x 1"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
Freedom X & XC Remote Panel with Bluetooth & 25' Network CableConnect with Bluetooth:
View key system information via FREEDOM X app on your smartphone or tablet
Configure and monitor important parameters and settings
Fault and error codes
Compatible with all FREEDOM X, XC, XC PRO models in 120Vac/60Hz or 230Vac/50Hz models
Download the FXC Control App on the iOS App Store or Android Google Play Store:
Easily monitor system status
Monitor alerts
Change settings conveniently
Compatible With:All FREEDOM X inverters and FREEDOM XC inverter/chargers: 817-1000, 817-2000, 817-2000-21, 817-3000, 817-1050, 817-2080, 818-2010, 818-3010, 806-1212
Xantrex Freedom SW3012 Inverter/Charger815-301212V, 3000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.NEW - PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features
Pure sine wave output to operate sensitive electronics
Advanced configuration options for customized applications
Parallel and series stacking capability
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power factor corrected, multi-stage charger for fast, efficient charging
Temperature compensated charging for a vareity of climate conditions
Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3
Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
Conformal coated circuit boards for humid environments
Dual input / Dual output AC interface for 3000 W model
Ability to charge batteries drained to extremely low voltage
Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915)
3When used with the remote panel4Sold separatelyProtection Features
Battery over-voltage and under-voltage protection
Over-temperature shutdown
Automatic overload protection
Short-circuit protection
Integrated, resettable AC breakers
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Charger Output Voltage: 12v
Inverter Output Voltage: 120v
Inverter Input Voltage: 12v
Charger Input - Voltage: 120v
Outlet Qty: Optional
Charging Banks: 1
Inverter Cont. Output Wattage: 3000w
Charger Output - Amps: 150a
Box Dimensions: 12"H x 18"W x 21"L WT: 69.4 lbs
UPC: 008153012413
Quick Guide (pdf)Owner's Manual (pdf)
30 Amp Power Cord Plus Cordset - 35' - YellowAll Marinco cordsets are made of the highest quality marine-grade construction with features you won't find on other power cords.Features:
Watertight molded plug and connector for safety and durability
Heavy-duty, super flexible marine-grade cable (30 amp 10 gauge, 50 amp 6 gauge)
All models include a standard threaded ring for hook-up to ordinary threaded inlets
Corrosion-resistant, nickel-plated contacts
Power Indicator Light: Boatside connector features a molded-in LED light
When it glows red, you know you have power to the boat
Contour Grip with Thumbnail Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the noon position, the blades line up for easy connection
Marinco Easy Lock system: Quickly locks the cord set to the inlet in just 1/8 of a turn
Exclusive locking tabs engage slots built into all Marinco inlets
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 30a
Length: 35'
Type: Cordset
Box Dimensions: 4"H x 12"W x 12"L WT: 10.4 lbs
UPC: 093344051197
Heavy-Duty Battery Selector SwitchThe 721 Battery Selector Switch is our heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries. Please note selector switches will not separate electronics from harmful engine starting spikes.Specifications:
DC Voltage: 48
Stud Size (Imperial): 3 x 3/8"
Stud Size (Metric): 2 x 10mm
Continuous Rating: 350
Intermittent Rating: 500
Cranking Rating: 1500
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Ventura Series Dual AC Outlet - 125V - 20AEnjoy the convenience of a dual 125V 20A AC outlet right on the exterior of your vehicle. Designed for outdoor reliability, the Scanstrut Ventura Series keeps you powered no matter where your journey takes you.Need quick access to dual 125V AC power on your boat? The Scanstrut Dual 125V 20A AC Outlet is built for seamless, reliable outdoor performance.With its compact, sleek design, this outlet delivers instant mains power, perfect for running portable Starlinks, blending cocktails, or making smoothies while out on the water.Designed for effortless use, simply lift the waterproof lid and plug in for instant connectivity.Crafted with Scanstrut marine-grade innovation, these sockets undergo rigorous UV exposure and waterproof testing (IPX6-rated). Built with 316 stainless steel components, they promise durability and performance in any environment.Upgrade your boat with a refined, high-performance power solution exactly where you need it.Features:
IP68 & IP69K waterproof (with lid closed)
Cover Sprung to Fully Open 180°
90° Holding Bump Feature
Premium click-to-close design
Marine-grade 316 stainless steel hardware
Durable matte black plastics
Built-in gaskets for a watertight seal
Corrosion-resistant design
Commercial-grade receptacle included
Built-in strain relief
Compatible with flat and round cables
Mounting Gasket
UV Resistant
Specifications:
Rating: 20A, 125V
Cable: 12AWG Triplex Recommended; Copper cable must be used for installation
Receptacle: Replace the receptacle only with Scanstrut P/N SC-UTIL-P-006285 (Qualtek 740W-F/06)
Certification: ROHS
Specifications:
Type: Electric
Box Dimensions: 3"H x 5"W x 5"L WT: 0.5 lbs
UPC: 5060114799295
Brochure (pdf)
MRBF Single Output Terminal Fuse Block with Cover - 30-300 AmpFeatures:
Protects Electrical Circuits from short circuit events and over-current loads, preventing wire insulation overheating and subsequent destruction.
Ignition Protected When Used With Egis Mobile Electric MRBF Fuses safe for installation in closed compartments with potentially explosive gases Harsh Environment design with shock and vibration resistance ideal for marine and vehicle electrical systems.
Sealed Against Dust & Water Intrusion to ensure reliable circuit protection for the life of the electrical system installation
58 Vdc Rating: easily supports 12 to 48V nominal applications.
4-Year Warranty: We stand behind our product's ability to meet your needs.
Specifications:
Continuous Current (Amps): 30-300A
Stud Size: M8 (5/16")
Mounting Hole Size: M10 (3/8")
Interrupt Rating @ 48 Vdc (Amps): 5,000
Interrupt Rating @ 58Vdc (Amps): 2,000
Ingress Protection: IP66
Specifications:
Amperage: 30-300
Fuse Type: Terminal
Type: Fuse Blocks
Box Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbs
UPC: 850053879524
Brochure (pdf)
300W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 21.0 - 33.0 VDC
LED indicators for power and protections
Low idle power draw
Dual GFCI protected AC outlets
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Detachable cable with 12V plug adapter
Detachable cable with battery clamps
Safety certified to UL standards, FCC compliant
Specifications:
Input: 24 VC
Output: 120 VAC
Watts: 300
Surge: 500 Watts
Weight: 3.46 (lbs)
Weight: 1.57 (kg)
Dimensions: 6.1 x 9.69 x 2.58 (in)
Dimensions: 155 x 246 x 65.5 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Inverter Cont. Output Wattage: 300w
Outlet Qty: 2 Duplex GFCI
Inverter Input Voltage: 24v
Waveform: Pure Sine Wave
Box Dimensions: 5"H x 8"W x 12"L WT: 4.9 lbs
UPC: 622988072147
Owner's Manual (pdf)Brochure (pdf)