Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line.
Compact footprint saves space
Clear, polycarbonate covers insulate and protect on three sides
Secure cover attachment does not interfere with cabling
Snap-out skirts for flexible cable entry
Radiused ends improve cable routing
Long, threaded studs to connect up to (4) large cable lugs
Plated brass nuts and stainless steel studs prevent thread galling during tightening
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
ProSafe FAILSAFE 30amp Galvanic IsolatorProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.
ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
ABYC A-28 July '08 Compliant and Fail Safe CertifiedCertified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
Flat Pack High Power SemiconductorsRobust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
Ignition ProtectedMeets ISO 8846 and can be mounted within an engine compartment.
Gold Plated Terminations
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
Horizontal Double Cable Seal - BlackThe DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. The seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two cables externally to internally on the roof of boats. Its low-profile design provides the best water ingress protection in class.Features:
Designed for two cables
IP68 watertight seal
Compact footprint - just 66.5mm (2.61”) W / 75.1mm (2.95”) L / 28.5 mm (1.12”) H
Easy-fit cable routing that cuts down your installation time through wood, metal, and GRP
Black high-impact plastic
Includes 316 stainless steel fixings and a waterproof 3M gasket
The low-profile construction is impact-resistant and provides extra protection from water
The materials have been selected to be UV- stable and hard-wearing
No messy sealant on bungs
Install 2 cables – select any combination:
6mm x 2
7mm x 2
8mm x 2
9mm x 2
10mm x 2
Blank x 2
Specifications:
Type: Deck Seal
Box Dimensions: 1"H x 4"W x 9"L WT: 0.4 lbs
UPC: 5060114798243
Brochure (pdf)
Orange 12 AWG Tinned Copper Wire - 100'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 12 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Orange
Length (Feet): 100'
Gauge: 12 AWG
Box Dimensions: 4"H x 4"W x 4"L WT: 2.8 lbs
UPC: 091887106886
Sealink Deluxe 12 Volt Receptacle12VRCWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Receptacles
Box Dimensions: 2"H x 4"W x 6"L WT: 0.1 lbs
UPC: 093344304484
Quick Guide (pdf)Brochure (pdf)
Pro Installer Link Joiner 3-WayPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high-purity copper and are tin-plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.Features:
Tin-plated high-purity copper for maximum conductivity and corrosion resistance
650 AMP continuous rating between two adjacent positions
525 AMP continuous rating across all positions
Bars can be doubled up to increase the rating
This link bar is intended to be used with 3/8" studs
Hole spacing is 2"
Overall dimensions 4.9" x 1"
Red 4/0 AWG Battery Cable - 25'Features:
Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis
Ultra flexible (Type 3) stranding resists fatigue due to ibration and flexing
Proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, asoline and ultra-violet radiation
Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion
Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Gauge: 4/0 AWG
Length (Feet): 25'
Box Dimensions: 5"H x 11"W x 11"L WT: 24.2 lbs
UPC: 091221802320
Black 6 AWG Battery Cable - 100'
ANCOR Marine Grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing.
ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion.
Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Length (Feet): 100'
Gauge: 6 AWG
Box Dimensions: 5"H x 11"W x 11"L WT: 13.2 lbs
UPC: 091887111286
Quick Guide (pdf)Owner's Manual (pdf)
50 Amp 125/250 Volt Locking Plug6365CRNProduct Features:
Corrosion resistant materials
50 amp 125/250 volt male plug
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Plugs
Box Dimensions: 3"H x 5"W x 9"L WT: 0.75 lbs
UPC: 093344006913
Owner's Manual (pdf)
Safety Duplex Cable - 8/2 AWG - Red/Yellow - Flat - 50'Ancor safety duplex cable features red and yellow Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available. These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. The premium vinyl insulation is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water,battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red/Yellow
Length (Feet): 50'
Gauge: 8/2 AWG
Box Dimensions: 5"H x 11"W x 11"L WT: 11.4 lbs
UPC: 091887805819
Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.
Compact, lightweight
Countersunk recesses for surface mount application
Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)
Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions
Standard interchange label system
Molded in high temperature, fiber reinforced plastics
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Zeus A8000-48V 8kW N62 Alternator with Clutch PulleyThe ARCO Zeus A8000-48V alternator turns on at lower RPMs, runs cooler, and provides more power than other 48V alternators that are larger and heavier. This alternator continuously generates over 3kW (55 Amps)at 2,500 RPM and almost 6kW (111 Amps) at 4,000 Alternator RPM. Put in real-world terms, a marine diesel engine charging at 1,200 RPM with a 3.13:1 pulley ratio is generating just over 5kW (97 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 3kW (55 Amps)!Instead of using rotors designed for 48 volts, many competitor alternators simply use their 12V rotors which is less efficient and limits output at all RPMs. In this scenario, your external smart regulator must drastically reduce field, by as much as 78%. If this is not done correctly, you run the risk of destroying the unit and damaging other components in your system. ARCO utilizes a native 48V rotor and field current. This results in our 48V alternator running cooler than competitor’s 48V alternators, having a direct impact on the alternator’s lifespan.Features:
Engineered for high energy production.
Suitable for marine, RV, military, and commercial applications.
Rapidly charges large battery banks.
Coolest operating temperatures for increased performance:
Heat shedding coatings
Rectifier located on housing exterior
Dual cooling fans
OEM components
Optimized for performance at idle speeds.
Reduces the need for a generator by creating additional power with your engine.
Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output.
Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging.
SAE J1171 Certified.
Proudly made in the U.S.A.
Technical Specifications:
Voltage - 48v
Field Type - P
Rotor Poles - 16
Stator Size - 138mm
Frame Size - Large
Weight - 15.89lbs/7.2kg
Regulation - External Only
Finish - (Black) E-coating
Cut-In RPM - 1,920 Alternator RPM
Maximum Alt RPM - 19,000
Battery Post - M8 Thread Post, Side Mount
Standard Pulley - 49K6 (6-groove, 49mm)
Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5
Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included)
Diodes - 6 positive, 6 negative, 80A Rated, Avalanche
Max Output (Cold, 9,000 RPM) at 53.5v - 180 Amps - 9,360 Watts – 14.8 kW PTO
Sustained Cruising Output (Hot, 6,000 RPM) at 53.5v - 138 Amps - 7,383 Watts – 10.5 kW PTO
Sustained Idle Output (Hot, 2,500 RPM) at 53.5v - 78 Amps 4,173 Watts – 6kW PTO
Max Continuous Operating Temperature - 100°C / 212°F
Mounting Application:Replaces factory dual alternator on many Sprinter RVs, including Roadtrek, Thor, Winnebago, and others. For all Mercedes Sprinter applications with the N62 option. Meets current Mercedes Upfitter weight and PTO requirements. Quick Guide (pdf)Brochure (pdf)