4005 Standard CableCap - Small PairFeatures:
Cable Size - 4, 2, 1
Pair - Red/Black
Insulates battery terminals which have added adapter terminals
For batteries with marine adapter terminals added on
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
4028 AC Isolation Cover - 7-1/2 x 10-1/2x3Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
2101 PowerPost Plus Cable Connector - 1/4" StudEnables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features:
150AMP bus allows small wire connections at high amperage cable connections
Connects high amperage cables securely
Stud dimensions: 1/4" x 1"
Base Material is Black Nylon 8231 GHS
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
3002 HD-Series Battery Switch SelectorFeatures:
500 Ampere Continuous Rating
Accepts 4/0 battery cables
Ignition protected - safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept 4 or more cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw TerminalFeatures:
Combines negative and positive buses on one block
Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation require
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
9002e e-Series Battery Switch Selector with Alternator Field Disconnect Features:
Switches isolated battery banks to all loads or combines battery banks to all loads
Includes AFD (Alternator Field Disconnect)
Make-before-break contact design allows switching between battery banks without power interruption
Ignition protected—safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Includes:
AFD (Alternator Field Disconnect)
CE Marked
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Tactile textures indicate knob position by feel only
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Positions: 2
AFD: Yes
Lockable: No
Box Dimensions: 3"H x 7"W x 9"L WT: 1.2 lbs
UPC: 632085900250
Owner's Manual (pdf)Brochure (pdf)
5015 ST Glass Fuse Block with Negative Bus Features:
Clear insulating cover with label recesses for accept Large Format Labels
Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses
Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit
Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Fuse Type: AGC/MDL
Type: Fuse Blocks
Box Dimensions: 2"H x 4"W x 8"L WT: 0.6 lbs
UPC: 632085050153
Owner's Manual (pdf)
9218 Terminal Block Jumpers for 2400 Series Blocks - Package of 5Features:
Jumpers allow creation of common circuits on independent connectors
Fits 20 AMP terminal blocks (2400 Series)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Xantrex system components expand power system functionalityThe Automatic Generator Start (AGS) is a Xanbus Enabled device that can automatically activate a generator to provide an MS or RS Inverter/Charger with power to recharge depleted batteries or assist with heavy loads. Compatible with popular generators, the AGS adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads.The AGS can be customized to suit each users preferences. A user can define whether the generator should be activated by low battery voltage, battery state of charge, thermostat operation, or load size on the inverter. A Quiet Time setting prevents the generator from starting at inconvenient times like nightfall. LED lights display the status of the AGS, while all user defined settings are programmed through the System Control Panel.Product Features
Designed for use with the System Control Panel and MS and RS Inverter/Chargers
Comprehensive triggers
User programmable quite times and generator start & stop settings
Built-in emergency shutdown
Compatible with Onan, Kohler, Westerbeke, Northern Lights, Generac, and Powertech generators
Meets UL458 Marine and RV standards
Xanbus Enabled
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
8261 Waterproof Panel 8 Position - Slate GreyFeatures:
Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
Designed for flybridge and open cockpit applications
ON-OFF Contura Switches
ON indicating LEDs embedded in switches
Watertight mounting gasket included
Countersunk mounting holes throughout
Two-part polyurethane slate gray finish
Industry standard height and width
Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
Completely wired and ready to install
Specifications:
Weatherproof: Water Resistant
Positions: 8
Nominal Voltage: 12v / 24v
Panel Cumulative Rating: 90A
Switch Rating: 20A @ 12v DC / 15A @ 24v DC
Height: 3.75"
Width: 9.37"
Depth: 3"
Included:
(8) 5021 Panel Mount AGC/MDL Fuse Holder
(1) 8214 Black 60 Label Set
(8) 8230 Contura Switch SPST Gray - Off-On
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Waterproof: Resistant
AC/DC: DC
Max Breaker Quantity: 8
Voltage: 12/24v
Box Dimensions: 7"H x 10"W x 10"L WT: 5.6 lbs
UPC: 632085082611
Owner's Manual (pdf)
1003 CableClam 1.39" Features:
Perfect for antenna installation
Waterproof co-axial installation without removing connectors
Save the expense of removing and replacing connectors
Avoid poor connections from removing factory connectors
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
2301 150AMP Common BusBar 10 x #8-32 Screw Terminal Features:
Stud design provides direct terminal to bus contact for low resistant connection
Stainless steel studs and screws allow high torquing for excellent electrical contact
Tin-plated copper bus for maximum conductivity and resistance to corrosion
UL 94-VO rated (self extinguishing) base material resists high heat
Raised bus provides easy access to multiple wires on a single screw
UL 94-VO rated base material resists high heat
Captive star type lock washers for anti-rotation and eliminate handling of small, easily dropped parts
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.