Green 6 AWG Tinned Copper Wire - 50'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 6 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Length (Feet): 50'
Gauge: 6 AWG
Color: Green
Box Dimensions: 5"H x 6"W x 6"L WT: 6.2 lbs
UPC: 091887119305
Dual PowerPost Connectors
Designed for connecting high amp conductors
Includes one black and one red insulator
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.
Available both in single and dual versions (for either two equal or two different outputs)
Both single or dual paddle can be positioned at various angles for the most confortable choice
Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version)
Max load 5 Amp @ 12VDC
For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay
Uflex® trim tabs require the use of the KTR - 42860S kit relay
Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”)
Easy to install on the following Ultraflex® steering systems:
- front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately
8666 Contura 4 Bilge Pump Control PanelBlue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp Features:
Designed for 12 or 24V DC systems
ON - OFF - AUTO Contura Switch
Watertight mounting gasket
Fuse holders accept commonly available AGC and MDL glass fuses
"ON” LED embedded in switch indicates the pump is running
Completely wired and ready to install
Specifications:
Weatherproof - Water Resistant
No. of Bilge Pumps - four (4)
Nominal Voltage - 12/24V
Panel Cumulative Rating - 45A
Switch Rating: 20A @ 12V DC / 15A @ 24V DC
Dimensions (H x W x D) - 3.75" x 5.25" x 3"
In the Box:
Panel Mount AGC/MDL Fuse Holder (P/N 5021) x four (4)
Contura III Switch SPDT - On - OFF - (ON) (P/N 7944) x four (4)
Black 60 Label Set (P/N 8214)
*Sold as an Individual Specifications:
Action: ON-OFF-AUTO
Color: Black/Grey
Throw/Pole: SPDT
Box Dimensions: 5"H x 7"W x 9"L WT: 0.75 lbs
UPC: 632085086664
Owner's Manual (pdf)
4365 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 12V Socket, 2x 2.1A Dual USB ChargersEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features:
Pre-wired harness included in all panels for easy installation
Silicon breaker boots and gasket protects against water ingress
Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw
Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode
12V DC only
Specifications:
Positions: 1
Nominal Voltage: 12V DC
Terminal FuseColor: LimeAmperage: 80A
Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks
Ignition protected-safe for installation aboard gasoline powered boats
Clear window-visual indication of blown condition
Must be used with terminal fuse block
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 80a
Fuse Type: Terminal
Type: Fuses
Box Dimensions: 1"H x 3"W x 4"L WT: 0.05 lbs
UPC: 632085051815
8385 DC 8 Position HorizontalFeatures:
Voltage 12 VDC/24 VDC
Amperage 100A
All positive, negative and grounding buses installed, fully pre-wired
Panels with meters include toggle switch for mounting up to 3 battery banks
All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Panel Labels
Over 500 individual labels available
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Max Breaker Quantity: 8
AC/DC: DC
Voltage: 12/24v
Box Dimensions: 5"H x 9"W x 12"L WT: 3 lbs
UPC: 632085083854
Quick Guide (pdf)Owner's Manual (pdf)
5135ANL Fuse350A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats
Silver-plated connector blades for corrosion resistance
Visible indication of blown condition
6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks
For use with Blue Sea Systems' ANL Fuse Blocks
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 350a
Fuse Type: ANL
Type: Fuses
Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs
UPC: 632085051358
36V Trolling Motor Wiring Kit with 70A Plug & ReceptacleThe Marinco Trolling Motor Wiring Kit makes trolling motor installation simple, packaging everything you need for a clean and professional set-up into a single box. Take the guesswork out of trolling motor installation with the Marinco Trolling Motor Wiring Kit. Bringing together the industry’s most trusted brands, the kit features marine-grade equipment for quality installations that go the distance. Clear instructions and color coding make installation quick and easy. And get total peace of mind, knowing you’ve got everything you need for a professional set-up – all in a single box.Features:
Pre-terminated Connections for Quick and Easy Installation
Bonded Cable for Ease of Routing
Ancor® Lugs and Heat Shrink Tubing
Includes Jumper to put Batteries in Series
Kit Includes:
44ft of 6/2AWG Bonded Cable
60A Blue Sea Systems® 285 Series Circuit Breaker
Pre-terminated Lug Connections (5/16” lugs for universal battery terminal connections, color coordinated for positive and negative)
Two Series Jumpers for Battery Connection
70A Marinco Trolling Motor Plug and Receptacle
16-14 AWG - Nylon 3-Way Connector - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Specialty Connectors
Package Qty: 25
Heat Shrink: No
Gauge: 16-14 AWG
Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs
UPC: 091887215106
Brochure (pdf)
On-Board Battery Charger 8A / 12V - 2 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.Features:
All high frequency, digital charging technology
Fully automatic 5-stage performance charging
Dedicated battery charging, sensing and control per bank
Expanded LED charge status monitor
Wiring and battery fault detection
Auto-maintain energy saver mode
Up to 40 percent lighter
100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
All models are pre-wired for easy installation
For all 12 volt flooded and AGM lead acid batteries
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
2 year warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output Voltage: 12/24v
Charger Output - Amps: 8a
Charging Banks: 2
Portable: No
Charger Input - Voltage: 120v
Box Dimensions: 6"H x 10"W x 13"L WT: 5.55 lbs
UPC: 046904904082
Owner's Manual (pdf)Brochure (pdf)
16-14 AWG - #6 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 16-14 AWG
Type: Ring Terminals
Post Size: #6
Package Qty: 25
Heat Shrink: No
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 091887212112
Brochure (pdf)