285-Series Circuit Breaker Panel Mount - 60A
Drop in replacement for 185-Series Circuit Breakers
Visible reset lever shows open condition
"Trip Free" - cannot be held closed after tripWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 60a
Box Dimensions: 2"H x 5"W x 8"L WT: 0.3 lbs
UPC: 632085170844
Brochure (pdf)
WeatherDeck Water Resistant Circuit Breaker PanelPN: 4378Color: GrayFeatures:
Rated IP67-temporary immersion for 30 minutes
Designed for flybridge and open cockpit applications
Independent label backlighting allows switching and dimming
Compatible with all Blue Sea Systems Digital Dimmers
Each panel can be mounted in four different orientations
UV stabilized and weather resistant faceplate
Constructed from corrosion resistant materials
Green LEDs illuminate circuit labels
Includes 4215 - 30 Square Format Labels
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Waterproof: Waterproof
AC/DC: DC
Voltage: 12/24v
Max Breaker Quantity: 8
Box Dimensions: 5"H x 6"W x 11"L WT: 1.7 lbs
UPC: 632085043780
Quick Guide (pdf)Owner's Manual (pdf)
7623Manual Control: YesCoil Voltage: 24vFeatures:
Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
500 Ampere continuous rating
Magnetic Latch (ML)-ACR draws very low current (<10 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Start Isolation (SI)-Can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)-Can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
Supports high-output alternators up to 500 Amps
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit protection
Silver alloy contacts provide high reliability for switching live loads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)
6011m-Series (Mini) Battery Switch Dual Circuit Plus
Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery
The "Combine Batteries" function offers the ability to combine the two battery banks in the event of a low Start battery
Features:
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Positions: 1
Lockable: Yes
Continuous Amperage: 600a
Box Dimensions: 3"H x 4"W x 7"L WT: 0.9 lbs
UPC: 632085060114
8293 Contura Actuator Removal Tool
Mounts on any Blue Sea Systems Contura Switch
Construced of thermal plasitic polycarbonate with a hard nylon surface overlay
For each embedded LED there is a corresponding number of lenses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8/2 AWG Duplex Cable - Flat Cable - Red/Black - 100'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits. Pacer manufactures 8 AWG Duplex boat cable in house in the USA for the best quality. First, the cable is built from finely stranded, Type III tinned copper conductors. These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 8 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating. How does it do that? During the extrusion process, the spaces between wires are filled. This leaves no space for moisture or air to accumulate. After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed. Just another reason 8 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features:
Extruded exterior cable insulation with no gaps
Highly flexible color coded wire insulation
Stranded, tinned copper conductors
Annealed Finely Stranded Tinned Copper ASTM B172 Class K
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture
Compliances:
UL Standard - 1426
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
No. of Conductors - 2
Type of Cable - Duplex
*Sold as an Individual Specifications:
Color: Red/Black
Gauge: 8/2 AWG
Length (Feet): 100'
Box Dimensions: 7"H x 10"W x 10"L WT: 20.85 lbs
UPC: 840248200479
Brochure (pdf)
Black 2 AWG Battery Cable - 50' Pacer's 2 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality. Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 2 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable. It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features:
Easy to strip, bend, and route
Excellent flexibility with the durable properties of PVC
Technical Specifications:
Conductor - Annealed fine stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C Flexible, Color Coded PVC
Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil
Voltage Rating - 600V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture
*Sold as an Individual Specifications:
Color: Black
Gauge: 2 AWG
Length (Feet): 50'
Box Dimensions: 7"H x 7"W x 7"L WT: 13.6 lbs
UPC: 840248203975
Brochure (pdf)
SCM25 MPPT Solar ChargeMasterThe SCM25 MPPT is Mastervolt's smallest MPPT charge regulator and just as powerful as its big brother. With 200 to 700 Wp in solar panels, switchable output and buzzer, this Solar ChargeMaster is very well suited to small and medium systems.The innovative technology in the Mastervolt MPPT charge regulators increases the efficiency of the solar panels. The SCM25 MPPT charges your batteries up to 30% faster than PWM regulators - with the same number of panels.MPPT Charge Regulator For All Solar PanelsBesides the traditional 36 and 72-cell panels, the SCM25 MPPT is also ideal for the inexpensive 60-cell panels. The high PV voltage makes it possible to connect several panels in series, significantly reducing the required cable length, installation time and power loss in solar cables. Easy To Use, Safe & FlexibleThe SCM25 MPPT is suitable for all battery types, including Mastervolt Lithium Ion. The charging profiles for all types of batteries are pre-programmed and can be selected at the push of a button. The SCM25 MPPT is quiet and equipped with a very user-friendly, clear display. Built-in protection against overload, high/low battery voltage, overheating, short circuits and reverse polarity ensures that safety comes first. Moreover, the SCM25 MPPT has a robust casing and is protected against condensation in conformity with IP23.Features:
Very high efficiency for faster charging
Stable, accurate Mastervolt Maximum Power Point Tracker
Up to 30% faster charging compared with PWM technology
Suitable for inexpensive 60-cell panels
Capacity for solar panel configurations from 200 to 700 Wp
Suitable for all battery types, including Mastervolt Lithium Ion
Automatic 12/24 V detection
Flexible charging characteristics
Battery temperature sensor for long lifespan
Large and bright display
Secure switchable output
Safe operation, audio signal in case of malfunctions
Very quiet operation
Robust casing, suitable for humid environments (IP23)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output - Amps: 18a
Charger Output Voltage: 12/24v
Box Dimensions: 5"H x 7"W x 9"L WT: 3.8 lbs
UPC: 816882020452
Owner's Manual (pdf)
Orion-Tr Smart DC-DC Charger Isolated 48/12 20A (240W)The Orion-Tr Smart DC-DC charger is an adaptive 3-stage charger (bulk – absorption – float) designed for dual-battery systems, such as in vehicles or on boats, where the starter battery (hence the alternator) is used to charge the service battery. The name "Smart" originates from its built-in Bluetooth connection, which allows the charger to be monitored and configured remotely via Bluetooth. It also features a remote on/off switch and an engine running detection mechanism. This isolated model allows the input and output to have separate chassis grounds.The Orion-Tr Smart charger can be used in 12V, 24V, or 48V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W, and unlimited multiple units can be connected in parallel to increase output power.Suitable for high temperatures up to 55°C with a full rated output up to 40°C.Features:
Remote on/off terminal - The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low-power switch, or, for example, the engine run/stop switch.
All models are short-circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.
High temperature protected - The output current will reduce at high ambient temperature.
IP43 protection - When installed with the screw terminals oriented downwards.
Screw terminals - No special tools are needed for installation.
Input fuse (not replaceable) - On 12 V and 24 V input models only.
Adjustable output voltage - Not intended for battery charging. Please consider using an Orion-Tr Smart for battery charging.
ChargeMaster Plus 12/35-3 Battery ChargerMake the most of your batteries with the ChargeMaster series, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. Thanks to Mastervolt’s innovative 3-step+ charging process, batteries also perform better and last longer.All ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection (with the exception of the ChargeMaster 12/10, ChargeMaster 12/15-2, and ChargeMaster 24/6). What’s more, you have the option for central, local, or remote monitoring, configuration, and control of your system.Clear DisplayA clearly lit display on the ChargeMaster provides all essential information: charge current, charge voltage, charge phase, and battery content measurement and/or battery condition measurement as a percentage of available Ah capacity. The display also provides an indication of MasterBus communication. Three buttons adjacent to the read-out panel allow for easy operating of the entire system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.Features:
For recreational and semi-professional use.
Suitable for any type of battery, including Lithium-Ion batteries.
3-Step+ charging technology for fast and complete charging also charges depleted batteries.
Memory function prevents overcharging in case of unreliable mains.
Safe and complete charging due to standard safety features.
Charging capacity up to 1000 Ah battery banks.
Easy to connect and quick to install.
Can charge multiple battery banks simultaneously.
Built-in system functionality (MasterBus) in combination with other Mastervolt products.
Clear control panel (with the exception of the ChargeMaster 12/10, ChargeMaster 12/15-2, and ChargeMaster 24/6).
Supplies your system without a battery.
Charging your batteries with every voltageThe Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1-regulation gets the most out of limited generator capacity.Robust Connections Solid metal-to-metal connectors equipped with strain relief prevent corrosion and overheating.Charging multiple battery banksThe ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two meters of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.DC Power SupplyEven if the batteries are not connected, Mastervolt ChargeMaster battery chargers can provide a constant DC output allowing you to turn on lights or keep the fridge cold.Specifications:
Nominal output voltage: 12V
Total charge current: 35 A at 14.4 V
Number of battery outlets: 3
Charge current second output: 35 A
Charge current third output: 35 A
Battery bank size: 70-350 Ah
Nominal input voltage: 120/230 V (90-265 V), 50/60 Hz
AC connection: Connector strips
Power supply mode: Yes
Galvanic isolation: Yes
Display/read-out: LED display
Specifications:
Charger Input - Voltage: 120/230v
Charger Output - Amps: 35a
Charger Output Voltage: 12v
Charging Banks: 3
Portable: No
Box Dimensions: 6"H x 12"W x 15"L WT: 9.2 lbs
UPC: 816882022876
Owner's Manual (pdf)
Alternator Temperature SensorWhen using the Alpha Pro in combination with non-Mastervolt alternators, this alternator temperature sensor may offer additional protection against over heating.
7156 Short Stop Circuit Breaker - 40A
Corrosion Resistant Material
IP 64 Water Resistant Boot
Push to Reset Only
Interrupt Capacity: 2,500A @ 28VDC
Red insulating boot included in retail package
Specifications
Amperage: 40A DC
Maximum Voltage: 28V DC
Interrupt Capacity: 2500A @ 28V DC
Minimum Operating Temperature: -10º C
Maximum Operating Temperature: 60º C
Screw Terminal Torque: 24 in-lb (2.71 Nm)
Terminal Stud: #10-32"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 40a
Box Dimensions: 2"H x 3"W x 7"L WT: 0.1 lbs
UPC: 632085071561