Electrical

3746 products


  • Sale -33%Last stock! Ancor Heavy Duty 6 AWG #10 Tinned Lug - 25-Pack [242243]

    Ancor Heavy Duty 6 AWG #10 Tinned Lug - 25-Pack [242243]

    5 in stock

    Heavy Duty 6 AWG #10 Tinned Lug - 2-PackAncor Marine Grade lugs are manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Seamless barrel design allows for maximum strength when crimped. Closed end design seals out moisture so cables stay dry and corrosion free. 100% Tinned Copper UL 486A WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 6 AWG Type: Lugs Post Size: #10 Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 1"W x 4"L WT: 0.3 lbs UPC: 091887242027

    5 in stock

    $40.99$27.50

  • Sale -32%Last stock! Ancor 22-18 Gauge - #8 Heat Shrink Spade Terminals - 25-Pack [313225]

    Ancor 22-18 Gauge - #8 Heat Shrink Spade Terminals - 25-Pack [313225]

    2 in stock

    22-18 Gauge - #8 Heat Shrink Spade Terminals - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.Features: Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength UL listed and CSA recognized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Spade connectors Post Size: #8 Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 091887316315 Quick Guide (pdf)

    2 in stock

    $32.99$22.50

  • Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 5/16" Post - 2-Pack [252285]

    Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 5/16" Post - 2-Pack [252285]

    18 in stock

    Heavy Duty Lugs - 1/0 Gauge Wire - 5/16" Post - 2-PackCable Gauge: 1/0Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 2 Gauge: 1/0 AWG Heat Shrink: No Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887256048 Quick Guide (pdf)

    18 in stock

    $10.50

  • Sale -10%Last stock! ARCO Marine Mercury/Mariner Outboard Relay w/Shroud  Grommet [R151] ARCO Marine Mercury/Mariner Outboard Relay w/Shroud  Grommet [R151]

    ARCO Marine Mercury/Mariner Outboard Relay w/Shroud Grommet [R151]

    3 in stock

    Mercury/Mariner Outboard Relay with Shroud & GrommetMercury/Mariner outboard relay that will fit Mercury & Mariner Outboards. 12 Volt, 30 AmpReplaces:Mercury Marine 828151Mercury Marine 828151A1Mercury Marine 882751A1*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs UPC: 693006009575

    3 in stock

    $19.43$17.50

  • Sale -41% Scanstrut DS30-P-BLK Vertical Cable Seal - Black *3-Pack [DS30-P-BLK-3] Scanstrut DS30-P-BLK Vertical Cable Seal - Black *3-Pack [DS30-P-BLK-3]

    Scanstrut DS30-P-BLK Vertical Cable Seal - Black *3-Pack [DS30-P-BLK-3]

    11 in stock

    DS30-P-BLK Vertical Cable Seal - Black *3-PackScanstrut premium IP68 waterproof cable seal provides easy-fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and the outer dome provides an additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to 1.18" (30 mm) in diameter  Height - .81" (20.5 mm) Color - Black Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 1.05 lbs Quick Guide (pdf)Brochure (pdf)

    11 in stock

    $128.97$75.50

  • Sale -15% Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) [GDI000032000] Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) [GDI000032000]

    Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted) [GDI000032000]

    6 in stock

    Galvonic Isolator VDI-32A 32A Max Waterproof (Potted)The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.The isolator is installed directly behind your boat's 120V - 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.Terminal posts are 6mm (1.4")This item is not ABYC A-28 approvedPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

    6 in stock

    $293.00$249.05

  • Sale -27% Scanstrut DS30-P-BLK Vertical Cable Seal - Black [DS30-P-BLK] Scanstrut DS30-P-BLK Vertical Cable Seal - Black [DS30-P-BLK]

    Scanstrut DS30-P-BLK Vertical Cable Seal - Black [DS30-P-BLK]

    36 in stock

    DS30-P-BLK Vertical Cable Seal - BlackScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to 1.18" (30 mm) in diameter  Height - .81" (20.5 mm) Color - Black Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114797376 Quick Guide (pdf)Brochure (pdf)

    36 in stock

    $42.99$31.50

  • Sale -50%Last stock! Mastervolt Mac Plus 12/48-15 [81203205] Mastervolt Mac Plus 12/48-15 [81203205]

    Mastervolt Mac Plus 12/48-15 [81203205]

    2 in stock

    Mac Plus 12/48-15Boost Your Service BatteryToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus 48V and 36V solve that problem. With brand-new bi-directional technology, the Mac Plus can use each side as an input or output, delivering a reliable and consistent charge to both service and starter batteries.Proven Mastervolt QualityThe Mac Plus uses the proven Mastervolt 3-step+ charge algorithm, delivering a quick and easy charge, even to completely flat batteries. By knowing when the engine is running and providing charge, you can also be sure that the Mac Plus will never drain your starter battery.A robust design holds up in even the harshest conditions, with battery temperature-optimized charging and high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.Total Power FlexibilityWith a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.Parallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 36/48V to 12/24V and vice versa.Analog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.Superior Monitoring & ControlCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.Features: Bi-directional technology Get either 48V or 36V power from a single unit Fast and safe charging, even during short trips Fanless design for silent operation Suitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4) Even charges fully depleted batteries Engine run detection protects the starter battery Adjustable current limits to meet Euro 5/6 requirements Voltage stabilization protects sensitive equipment, lights, and loads Parallel operation to obtain charging capacities well over 100 Amps MasterBus, CZone, and NMEA 2000 compatible, with intelligent system monitoring and automation Temperature compensation and voltage sense for an optimal charging result E-Mark/R10 certification for mobile applications Power supply mode offers stable power for sensitive loads Heavy-duty connections for easy installation and quick setup via DIP switches General Specifications: Battery Voltage Sense: Yes Status indicator: Yes, 3 color double LED Communication protocol: MasterBus, CZone & NMEA 2000 Output voltage: 30-60 V DC Nominal output voltage: 36/48 V Output voltage stabilization: 2 % at extremes of temps, load, and input Output voltage ripple (peak-peak): Max. 1 % Max. output power: 900 W Max. output current: 15 A Nominal input voltage: 12 V DC Input voltage range: 8-16 V Max. input current: 60 A Galvanic isolation: No Efficiency: > 95 % (at nom. input voltage, full load); 97 % peak Parallel configuration: Yes, up to 4 Alarm contact: Yes, through MasterBus, CZone, DIP Switch, or remote switch Engine run signal input: Yes (active high/active low) DIP switches: Yes, for basic setup Dimensions, hxwxd: 255x165x66 mm, 10.0 x 6.5 x 2.6 inch Weight: 2 kg, 4.4 lb Compliance: CE, E-Mark, SAE J1171, ISO 8846 ignition protected, ABYC & UKCA Technical Specifications: Battery types: Gel, AGM, Lithium Ion, user-defined Power consumption: < 5 mA, < 10 mA in CZone, < 1 mA in MasterBus Temperature range (ambient temp.): - 25 °C to 60 °C; derating > 40 °C/104 °F Cooling: Natural cooling Protection degree: IP23 Protections: Overload, over-temperature, DC short circuit, reversed polarity (fuse) Specifications: Charger Input - Voltage: 12v Charger Output - Amps: 15a Charger Output Voltage: 36/48V Box Dimensions: 4"H x 9"W x 15"L WT: 5.6 lbs UPC: 816882023446 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    2 in stock

    $1,054.99$527.50

  • Sale -27% Mastervolt ChargeMaster Plus 12/50-3 Battery Charger [44310505] Mastervolt ChargeMaster Plus 12/50-3 Battery Charger [44310505]

    Mastervolt ChargeMaster Plus 12/50-3 Battery Charger [44310505]

    14 in stock

    ChargeMaster Plus 12/50-3 Battery ChargerMake the most of your batteries with the ChargeMaster series, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. Thanks to Mastervolt’s innovative 3-step+ charging process, batteries also perform better and last longer.All ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection (with the exception of the ChargeMaster 12/10, ChargeMaster 12/15-2, and ChargeMaster 24/6). What’s more, you have the option for central, local, or remote monitoring, configuration, and control of your system.Clear DisplayA clearly lit display on the ChargeMaster provides all essential information: charge current, charge voltage, charge phase, and battery content measurement and/or battery condition measurement as a percentage of available Ah capacity. The display also provides an indication of MasterBus communication. Three buttons adjacent to the read-out panel allow for easy operating of the entire system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.Features: For recreational and semi-professional use. Suitable for any type of battery, including Lithium-Ion batteries. 3-Step+ charging technology for fast and complete charging also charges depleted batteries. Memory function prevents overcharging in case of unreliable mains. Safe and complete charging due to standard safety features. Charging capacity up to 1000 Ah battery banks. Easy to connect and quick to install. Can charge multiple battery banks simultaneously. Built-in system functionality (MasterBus) in combination with other Mastervolt products. Clear control panel (with the exception of the ChargeMaster 12/10, ChargeMaster 12/15-2, and ChargeMaster 24/6). Supplies your system without a battery. Charging your batteries with every voltageThe Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1-regulation gets the most out of limited generator capacity.Robust Connections Solid metal-to-metal connectors equipped with strain relief prevent corrosion and overheating.Charging multiple battery banksThe ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two meters of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.DC Power SupplyEven if the batteries are not connected, Mastervolt ChargeMaster battery chargers can provide a constant DC output allowing you to turn on lights or keep the fridge cold.Specifications: Nominal output voltage: 12V Total charge current: 50 A at 14.4 V Number of battery outlets: 3 Charge current second output: 50 A Charge current third output: 50 A Battery bank size: 100-500 Ah Nominal input voltage: 120/230 V (90-265 V), 50/60 Hz AC connection: Connector strips Power supply mode: Yes Galvanic isolation: Yes Display/read-out: LED display Fastening: Mounting bracket (included) or 4x screw Specifications: Charger Input - Voltage: 120/230v Charger Output - Amps: 50a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 12"W x 15"L WT: 9.2 lbs UPC: 816882022883 Owner's Manual (pdf)

    14 in stock

    $1,385.99$1,007.99

  • Sale -37% Blue Sea 7443 UL-489 Circuit Breaker - 20A Flat Rocker [7443]

    Blue Sea 7443 UL-489 Circuit Breaker - 20A Flat Rocker [7443]

    6 in stock

    7443 UL-489 Circuit Breaker - 20A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 20A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 80V DC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type:  #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 10000A Specifications: Amperage: 20a Box Dimensions: 2"H x 3"W x 5"L WT: 0.25 lbs UPC: 632085074432

    6 in stock

    $63.99$40.50

  • Sale -26% Blue Sea 8231 Water Resistant Contura III Switch - OFF-(ON) - Grey [8231] Blue Sea 8231 Water Resistant Contura III Switch - OFF-(ON) - Grey [8231]

    Blue Sea 8231 Water Resistant Contura III Switch - OFF-(ON) - Grey [8231]

    9 in stock

    Water Resistant Contura Switch - OFF-(ON) - GreyFeatures: Vibration, shock, thermoshock, moisture, and salt spray resistant Specially manufactured for mounting in Blue Sea Systems' water-resistant panels Ignition Protected - Safe for installation aboard gasoline-powered boats Meets UL1500 and ISO8846 ignition protection requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Grey Throw/Pole: SPST Action: On/Off Box Dimensions: 1"H x 2"W x 4"L WT: 0.3 lbs UPC: 632085082314

    9 in stock

    $24.99$18.50

  • Sale -32% Blue Sea 8232 Water Resistant Contura III Switch - ON-OFF-ON - Grey [8232] Blue Sea 8232 Water Resistant Contura III Switch - ON-OFF-ON - Grey [8232]

    Blue Sea 8232 Water Resistant Contura III Switch - ON-OFF-ON - Grey [8232]

    7 in stock

    8232 Water Resistant Contura III Switch - ON-OFF-ON - GreyFeatures: Vibration, shock, thermoshock, moisture, and salt spray resistant Specially manufactured for mounting in Blue Sea Systems' water-resistant panels Ignition Protected - Safe for installation aboard gasoline-powered boats Meets UL1500 and ISO8846 ignition protection requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Grey Throw/Pole: SPDT Action: On/Off/On Box Dimensions: 1"H x 3"W x 4"L WT: 0.41 lbs UPC: 632085082321

    7 in stock

    $35.99$24.50

Electrical

© 2025 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account