Electrical

Bilge Pump Cable - 14/3 STOW-A Jacket - 3x2mm² - 100'Features: UL1426 Premium Tinned Copper Boat Cable ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing Bilge Pump Cable features grey insulation with black, brown and red conductors specifically for bilge pumps. Oil resistant ANCOR's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105° C dry and 75° C wet, and is resistant to heat and abrasion STOW - A - Water resistant jacket Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards Made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blk/Red/Brown Length (Feet): 100' Gauge: 14/3 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 11.45 lbs UPC: 091887807264

Read more less

Yellow 12 AWG Primary Wire - 100'Features: ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to ibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Yellow Length (Feet): 100' Gauge: 12 AWG Box Dimensions: 3"H x 4"W x 4"L WT: 2.8 lbs UPC: 091887107081 Quick Guide (pdf)Brochure (pdf)

Read more less

Sportsman Series HF Battery Charter - 20 Amp - 2 BankSS2HF - High Frequency Charger! 2 x 10A banks - 20A total Selectable Algorithms (Lithium, Wet Cell & AGM) Lightweight: 7 lb. Size: 3.25" x 8.0" x 9.3" For over three decades our transformer-based Sportsman Series chargers have set the standard in marine charging through best-in-class performance, trusted safety features, & unequalled durability.The Sportsman HF continues the SS legacy in a much lighter and smaller form factor.All SSHF chargers allow you to configure each bank to charge any combination of 12V Lithium (LiFePO4), Lead-Acid or AGM batteries.Applications Include: Inland Watercraft, Saltwater Watercraft, Golf Carts, Utility Carts, Farm Equipment, Garage/Shop Equipment, RV, Trailers & more!Key Features of Sportsman HF Chargers 10 AMP Banks: Powerful High Frequency charging capacity for a range of applications with true independent outputs that won't cut back like other chargers Selectable Algorithms: Designed to configure each bank separately to match your set up and battery chemistry(s): Choose from Lithium (LiFePO4), Wet Cell or AGM Rugged & Reliable: Waterproof (IP67) construction for fresh & saltwater use Safety Features: Zero spark technology, reverse polarity protection, and ignition protection (US Coast Guard compliant) User-Friendly Indicators: LED lights display the state of charge with on-board diagnostic codes Battery System Compatibility: Supports 12V – 48V systems with independent outputs for precise, multi-stage charging PRO TIP 1: Add a PRO Charging Systems Battery Gauge to monitor battery status on both the gauge and your smart device using the free app. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: 12v Charging Banks: 2 Portable: No Box Dimensions: 7"H x 12"W x 12"L WT: 6.95 lbs UPC: 738562003596 Brochure (pdf)

Read more less

30 Amp Surface Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Flexible mounting for both panel mount and surface mount setups Compact design makes integration easy in tight spaces Specifications: Amperage: 30a Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs UPC: 810196330009 Quick Guide (pdf)Brochure (pdf)

Read more less

C-Series Toggle DC Double PolePN: 7269Poles: 2Color: WhiteAmperage: 200AFeatures: Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 632085072698

Read more less

16-14 AWG Heat Shrink Female Bullet Terminal - 25 PackDisconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.Features: Female bullet terminal Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Disconnect & reconnectable Creates solid connections Meets multiple compliances Benefits: Environmentally sealed  Built for durability Tinned Copper  Long Lasting Easy to install Characteristics: Insulation Color: Blue Wire AWG: 16-14 AWG Package Size: Twenty-five included Bullet Terminal Size (inch): 0.156" Shrink Ratio: Approximately 3:1 at 135 °C Operating Temperature: -55 °C - 125 °C Volume Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248207157 Quick Guide (pdf)

Read more less

Argo FET Battery Isolator - 200AMP - 2 BatteriesSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

Orion-TR 12/24-10A (240W) Isolated DC-DC ConverterIsolated Model - separate in and out (-) leads Remote On/Off TerminalThe remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch. All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.  High Temperature Protected The output current will reduce at high ambient temperatures.  IP43 Protection When installed with the screw terminals oriented downward.  Screw Terminals No special tools are needed for installation.  Input Fuse (not replaceable) On 12 V and 24 V input models only.  Adjustable Output Voltage Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).Specifications: Input Voltage Range: 8-17 V Under Voltage Shut Down: 7 V Under Voltage Restart: 7.5 V Nominal Output Voltage: 12.2 V Output Voltage Adjust Range: 10-15 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 10 A Maximum Output Current (10 S) at Nominal Output Voltage: 15 A Short Circuit Output Current: 25 A Cont. Output Power at 25 Degrees C: 280 W Cont. Output Power at 40 Degrees C: 240 W Efficiency: 88 % No Load Input Current (2): < 100 mA  Current Consumption: < 200uA when disabled via its remote port Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 16 mm² AWG6 Weight: 1.3 kg (3 lb) Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) Safety Standards: EN 60950 Emission: EN 61000-6-3, EN 55014-1 Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Liquid Electrical Tape - Red - 4 oz Creates an airtight, waterproof, and UV-resistant seal on electrical connections and wires. Designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs. The flexible coating withstands temperatures from -50°F to +275°F and provides superior dielectric protection.Directions:Wires or terminals to be sealed must be clean and dry. Squeeze Star brite® Liquid Electrical Tape onto the electrical connection area. Allow to dry for 5 minutes and apply a second coat if a greater thickness of seal is needed. Additional coats may be applied at 5-minute intervals to build up extremely thick protection. The product fully cures in 24 hours.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Liquid Electrical Tape - White - 4 oz Creates an airtight, waterproof, and UV-resistant seal on electrical connections and wires. Designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs. The flexible coating withstands temperatures from -50°F to +275°F and provides superior dielectric protection.Directions:Wires or terminals to be sealed must be clean and dry. Squeeze Star brite® Liquid Electrical Tape onto the electrical connection area. Allow to dry for 5 minutes and apply a second coat if a greater thickness of seal is needed. Additional coats may be applied at 5-minute intervals to build up extremely thick protection. The product fully cures in 24 hours.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Liquid Electrical Tape - Green - 1 ozCreates an airtight, waterproof, and UV-resistant seal on electrical connections and wires. Designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs. The flexible coating withstands temperatures from -50°F to +275°F and provides superior dielectric protection.Directions:Wires or terminals to be sealed must be clean and dry. Squeeze Star brite® Liquid Electrical Tape onto the electrical connection area. Allow to dry for 5 minutes and apply a second coat if a greater thickness of seal is needed. Additional coats may be applied at 5-minute intervals to build up extremely thick protection. The product fully cures in 24 hours.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Liquid Electrical Tape - Red - 1 ozCreates an airtight, waterproof, and UV-resistant seal on electrical connections and wires. Designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs. The flexible coating withstands temperatures from -50°F to +275°F and provides superior dielectric protection.Directions:Wires or terminals to be sealed must be clean and dry. Squeeze Star brite® Liquid Electrical Tape onto the electrical connection area. Allow to dry for 5 minutes and apply a second coat if a greater thickness of seal is needed. Additional coats may be applied at 5-minute intervals to build up extremely thick protection. The product fully cures in 24 hours.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less