Electrical

DS30-SL Starlink Cable Seal - BlackThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features: IP68 waterproof rated Made from premium marine-grade UV-stable materials Includes 316 stainless steel fixings and a waterproof 3M gasket Captive nuts ensure an easy and reliable repeat installation No messy sealant on bungs Split bungs for ease of installation Install connectors up to Ø30mm (1.18") in diameter Fully customizable with self-drill bung options 2 bungs - 1x blank & 1x 8.5mm (0.34”) Specifications: Material: High Impact Plastic  Height: 20.5mm (0.81") Color: Black Diameter of Cable Seal: 59mm (2.32") Diameter of Connector: Ø30mm (1.18") Bungs: 1 x blank / 1 x 8.5 mm (0.34") Compatible with: Flat High Performance / Performance (Gen 2) High Performance / Performance (Gen 1) Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs UPC: 5060114799714 Quick Guide (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Five (5) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.75 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

285-Series Thermal Circuit Breaker Surface Mount, 30A Drop-in replacement for 185-series Circuit Breakers Visible reset lever shows open condition "Trip Free" - cannot be held closed after tripWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 2"H x 5"W x 8"L WT: 0.4 lbs UPC: 632085171810 Brochure (pdf)

Read more less

285-Series Thermal Circuit Breaker Surface Mount, 40A Drop-in replacement for 185-series Circuit Breakers Visible reset lever shows open condition "Trip Free" - cannot be held closed after tripWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 40a Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 632085171827 Brochure (pdf)

Read more less

Pre-Charge CableThe Pre-charge Cable allows internal capacitors of an inverter, inverter/charger, or MPPT to be pre-charged via the DC terminals before connecting the battery. This method ensures that connecting the battery will not result in arcing at the connection point.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

2 Position Bus/Base - Only 10mmThis heavy-duty dual stud busbar features two 3/8” studs for high-current connections. It supports large cable lugs and is ideal for linking batteries, power inverters, or distribution panels.The corrosion-resistant construction ensures long-lasting performance in harsh marine or off-road environments. This busbar offers a reliable solution for compact yet powerful electrical layouts where durability and efficiency are critical.Its compact footprint makes it easy to mount in tight spaces, while the high-conductivity design ensures minimal voltage drop across demanding circuits. Built for serious power distribution, it’s a staple for any professional-grade setup.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16  Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4″ Screws Quick Guide (pdf)Brochure (pdf)

Read more less

Orion-TR Smart 12/12-18A (220W) Isolated DC-DC Charger or Power SupplyThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.Bluetooth Smart Enabled Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product Fully programmable Battery charge algorithm (configurable) or fixed output.  Smart Alternator Compatibility: engine running detection mechanism Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged For lithium batteries, the absorption time is fixed; the default is 2 hours Alternatively, a fixed output voltage can be chosen Suitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).Remote On/OffA remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.High Temperature ProtectedThe output current will reduce at high ambient temperatures.IP43 ProtectionWhen installed with the screw terminals oriented downward.Screw TerminalsNo special tools are needed for installation. Input fuse (not replaceable) *Input fuse (not replaceable) Specifications: Input Voltage Range: 8-17 V Under Voltage Shut Down: 7 V Under Voltage Restart: 7.5 V Nominal Output Voltage: 12.2 V Output Voltage Adjust Range: 10-15 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 18 A Maximum Output Current (10 S) at Nominal Output Voltage minus 20%: 25 A Short Circuit Output Current: 40 A Cont. Output Power at 25 Degrees C: 280 W Cont. Output Power at 40 Degrees C: 220 W Efficiency: 87 % No Load Input Current (2): < 80 mA  Standby Current: Less than 1A Can Be Used as Power Supply: Yes, output voltage can be set with Bluetooth  Galvanic Isolation: 200 VDC between input, output, and case  Operating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C)  Humidity: Max. 95 % non-condensing  DC Connection: Screw terminals  Maximum Cable Cross-Section: 16 mm²  AWG6  Weight: 1,8 kg (3 lb)  Dimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch)  Protection Category IP43 (electronic components), IP22 (connection area)  Safety Standards: EN 60950 Emission/Immunity Standards: EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Portable: No Charging Banks: 1 Charger Output Voltage: 12v Charger Output - Amps: 18a Charger Input - Voltage: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 2.95 lbs UPC: 8719076046066 Quick Guide (pdf)Brochure (pdf)

Read more less

SmartSolar MPPT 250/70-TR VE.CanThe SmartSolar MPPT is packed with advanced technology to get the most out of your solar panels whilst protecting your batteries. It operates at 98% efficiency with natural cooling and is engineered to withstand the toughest conditions.The lightning-fast maximum power point tracking converts all available sunlight into useful energy. Its charge algorithms enhance power output and extend battery life by intelligently managing charging cycles. Built-in SafetyShield+ features such as over-temperature, short-circuit, and reverse polarity protection safeguard your batteries from potential issues.Simply put: the SmartSolar MPPT is the smartest solar charge controller under the sun.Features: Lightning-fast maximum power point tracking Remote Management optional Intelligent charge algorithm VictronConnect App Wireless charging synchronisation SafetyShield+ Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 250V Charger Output - Amps: 70A Charger Output Voltage: 12V, 24V 36V, 48V Charging Banks: 1 Continuous Amperage: 35A/MC 4 conn Box Dimensions: 6"H x 10"W x 11"L WT: 8.3 lbs UPC: 8719076051213 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

50 AMP Male Non-Metallic Inlet Cover - WhiteSmartPlug’s 50 AMP 125/250 V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors.  The solid sleeve connection and weatherproof seal makes it a preferred option.  The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. Features: Reduces Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time-even in the dark! Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord. Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration. Quick and Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1698 Marine-Grade Dual GFCI ReceptacleFeatures: Delivers continuous ground fault protection Automatically self-tests to ensure it can respond to feedback The status indicator light provides simple, intuitive feedback Designed with stainless steel hardware Designed with UV-stabilized plastics Specifications: Amperage; 20A Color: White Trip Level: Class A, 5mA +/- 1mA Voltage: 125V AC

Read more less

MasterShunt 500 CZoneMasterShunt is the heart of every battery powered energy system. This integrated battery monitor shares information about the battery bank with other MasterBus, CZone or NMEA 2000 enabled devices such as battery chargers, inverter/chargers and displays. No surprises: allowing complete automation of your system, MasterShunt improves comfort, prolongs battery life and extends your runtime.The MasterShunt 500 provides all information needed for monitoring your battery bank and control of your system, such as voltage, current, state of charge and time remaining. All information is made available to the system by a single MasterBus or CZone cable. Extremely accurate measurement of current flow over state of charge enables the MasterShunt to precisely determine the time remaining.Programmable events and an integrated real time clock make it possible to fully automate your system. Examples are to start your generator automatically when the battery bank is low (or just delaying at night!), or to automatically generate a warning at a certain depth of discharge. The proven MasterShunt design has been upgraded to obtain an even higher level of accuracy and control. Taking into account battery specific parameters, MasterShunt takes reading accuracy to a whole new level.The MasterShunt 500 CZone allows freedom of choice with regards to fuse type, rating and location. The battery monitor is supplied with an internal bus bar, to be used in situations where an external fuse holder is selected. In case the MasterShunt is installed close to the battery, the bus bar may be replaced by either an ANL type or Class T main fuse, saving both space and cost.Features: MasterBus, CZone and NMEA 2000 communication. Fits in a CZone system including setup tools and configuration file. Digital shunt providing the energy system with extensive information and historical data. Very accurate and reliable determination of State of Charge (SOC). Service mode prevents memory loss during system maintenance. Realistic and precise indication of the time remaining. For higher current, multiple MasterShunt models may be installed in parallel. MasterConnect system makes connecting to the DC Distribution product very easy. Straight forward, easy to install. Freedom of choice for fuse type, rating and location. Suitable for T-fuse and ANL-fuse (to be ordered separately). Robust housing with isolation of the DC connections. Applications:Any application in marine, mobile, industrial, infrastructure where batteries need to be monitored for increased reliability, battery life, comfort and runtime. Owner's Manual (pdf)

Read more less

SPDT Chrome Plated Toggle Switch - ON/OFF/(ON)Single pole, double throw toggle switch turns one of two circuits on. Common applications include intermittent manual override and maintained float switch control for bilge pumps.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC Three #6-32 screw terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55088 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF-ON Color: Chrome Plated Throw/Pole: SPDT Box Dimensions: 1"H x 3"W x 5"L WT: 0.08 lbs UPC: 870216046747

Read more less