APS-160 Automatic Power Selector - 160AThe Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, and the operation continues uninterrupted.Two independent power sources are wired to the APS and routed as a single output to the vital load. Alarm sense wires can be easily attached to input studs, providing a loss of power source signal. Features:
Easy installation
Rugged, rust-proof anodized aluminum case
Specifications:
Max Loads: 160 amps
Voltage Rating: 6 – 50 VDC, neg. ground
Stud Terminal Size: 6mm
Dimensions (inches): 9.0 x 4.5 x 3.1
Weight (lbs): 5
19mm Push Button Switch - Off/On Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-On (standard contact)
Off/On: Blue/red
Rear Mark Page: Red dot
Switch Rating: 15A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: ON-OFF
Color: Blue/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
PT-24-13W Battery Charger“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features:
24-volt model
“Smart” circuitry provides three-stage charging – bulk, absorption, float
Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
Multiple isolated output banks; ammeter indicates total output current
The optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage from overloading
Use as a power supply; can power loads without a battery in line
Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
Install in conjunction with PT-MCU for additional control and monitoring
ABS-type approval for battery charging and power supplies
Specifications:
Input VAC (50-60 Hz.): 90 – 132, 180 – 264
Input Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4
Power Factor: .7
Max Output Amps: 13
Output Banks: 3
Battery Capacity (Amp-Hours): 26 – 130
Operating Temp. Rating Reference: T-2
Case Size Reference: A-1
Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Optional Temp. Sensor Model: TCS-12/24
Remote Panel Model: RP
Compliance Reference: CG, ABS
Temperature Rating References:
Temperature: -10 degrees C to +60 degrees C
Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C
Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):
Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
Compliance References:
UL: UL 1950 (per DNB report)
CG: USCG CFR 183.410 (Ignition protected)
EN: EN 60335-1
CE: Carries the CE mark
ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
Options:Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Charger Input - Voltage: 115/230v
Charger Output - Amps: 13a
Charger Output Voltage: 24v
Charging Banks: 3
Portable: No
Inverter Input Voltage: 115/230v
Inverter Output Voltage: 24v
Outlet Qty: Hardwire
Box Dimensions: 10"H x 10"W x 16"L WT: 9 lbs
Owner's Manual (pdf)
Marine Grade Spiral Wrap 1/2" x 100'Features:
Permits flexible routing of cable harnesses
Provides abrasion protection for wire and cable
Allows lead-outs at any point for the greatest ease of installation
Split loom temperature range is -40°F to 275°F / -40°C to 135°C
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 8"H x 12"W x 12"L WT: 2.15 lbs
UPC: 091887457063
B.O.S. Battery Optimization System - 12V - 2-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruples run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in any application where batteries are in series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 3" - 3-Pack - BlackPackage of 3 Black 3"(7.6cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)Wire Range: 12-8 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs
UPC: 091887303360
Heavy Duty Lugs - 4 Gauge Wire - 3/8" & 5/16" Post - Combo PackCable Gauge: 4Screw Size: 3/8" & 5/16"
ANCOR Marine Grade lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Lugs
Post Size: 5/16" & 3/8"
Package Qty: 1
Heat Shrink: No
Gauge: 4 AWG
Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs
UPC: 091887802313
Quick Guide (pdf)
DC Analog Voltmeter
Simple 2-wire connection
Meter Senses Powers from same connection
Backlit meter face
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8066 Red LED Indicator Light Features:
Red
120V AC
0.5 Millamperes
Easily installed in any Blue Sea Systems circuit breaker panel
Simple push-in installation mounts in any thickness material
Useful as general indicator and alarm lights
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs
UPC: 632085080662
BlueSolar Charge Controllers MPPT 100/30A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.Ultra-Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.Remote Monitoring & ControlRemotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.Please contact your dealer for any returns, repairs or support issues related to this product. Brochure (pdf)
Replacement Key for 701This replacement knob replaces the existing knob for the 701 switch.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.