Angled 22 to 8 AWG Single Crimp Ratcheting CrimperFeatures:
For crimping heat shrink terminals
Angled head design is ideal for use in tight spaces
Self-releasing mechanism ensures a proper crimp
Ratcheting operation and ergonomic handles prevent fatigue
Length: 9.5" (24 cm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
On-Board Battery Charger 30A / 12V - 3 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.Features:
All high frequency, digital charging technology
Fully automatic 5-stage performance charging
Dedicated battery charging, sensing and control per bank
Expanded LED charge status monitor
Wiring and battery fault detection
Auto-maintain energy saver mode
Up to 40 percent lighter
100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
All models are pre-wired for easy installation
For all 12 volt flooded and AGM lead acid batteries
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
2 year warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output Voltage: 12/24/36v
Charger Output - Amps: 30a
Charging Banks: 3
Portable: No
Charger Input - Voltage: 120v
Box Dimensions: 10"H x 11"W x 14"L WT: 11 lbs
UPC: 046904904143
Owner's Manual (pdf)Brochure (pdf)
On-Board Battery Charger 5A / 12V - 1 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.Features:
All high frequency, digital charging technology
Fully automatic 5-stage performance charging
Dedicated battery charging, sensing and control per bank
Expanded LED charge status monitor
Wiring and battery fault detection
Auto-maintain energy saver mode
Up to 40 percent lighter
100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
All models are pre-wired for easy installation
For all 12 volt flooded and AGM lead acid batteries
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
2 year warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output Voltage: 12v
Charger Output - Amps: 5a
Charging Banks: 1
Portable: No
Charger Input - Voltage: 120v
Box Dimensions: 6"H x 10"W x 11"L WT: 4.1 lbs
UPC: 046904904099
Owner's Manual (pdf)Brochure (pdf)
These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. All models meet the stringent UL458 regulatory requirements. Product Features:
Portable power for AC products
Two GFCI AC receptacles for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency - converts virtually all the battery's available power to AC
Mounting brackets for convenient installation
Heavy duty stud connectors
Remote on/off switch included
Protection Features:
Overload and over temperature shutdown
Over voltage protection (15.0 VDC)
Low voltage alarm (11.0 VDC)
Low voltage cut-out (10.5 VDC)
Product Applications:
Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans
Handheld Power Tools: drills, jigsaws, sanders and buffers
Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment
Office Equipment: computers with 17" monitors, facsimile machinesWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 3000w
Inverter Input Voltage: 12v
Waveform: Modified Sine Wave
AC Connection Type: Hardwire
Inverter Output Voltage: 115v +/- 5%
Inverter Cont. Output Wattage: 1500w
Box Dimensions: 6"H x 8"W x 17"L WT: 7.2 lbs
UPC: 715535896478
Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
PRO Series InvertersPerformance inverters designed for RVs and boatsDesigned for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. DescriptionThe Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1000W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features
Inverter easily powers TVs, small appliances, and other electronics
Built-in 15A circuit breaker to protect GFCI connected loads
Up to 25A pass through for hardwired loads
Digital remote control displays power output, AC source and battery voltage
Detachable remote control can be mounted wherever convenient
Conformal coated electronics provide moisture resistance
Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)
Protection Features
Battery over-voltage and under-voltage protection
Over temperature shutdown
Automatic overload protection
Short-circuit protection
Ground fault protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Inverter Input Voltage: 12v
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 2000w
Waveform: Modified Sine Wave
Inverter Output Voltage: 120v
AC Connection Type: Hardwire
Inverter Cont. Output Wattage: 1000w
Box Dimensions: 6"H x 10"W x 13"L WT: 10 lbs
UPC: 715535113520
Owner's Manual (pdf)Brochure (pdf)
Battery Selector Switch with AFDPart No. 2110ADescriptionContinuous Amps: 230Momentary Amps: 345Dimensions: 5"D x 2-3/4"H
Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including "off" without damage to alternator or electrical system. AFD is required on some electrical systems.Heavy duty copper sweep contacts"Make before break" contacts allow selection of all positions except "off" while engine is runningUse with 6, 12, 24 or 36 volt systemsNew design is easy to retrofit into existing hole patternsBuilt-in skirt protects connectionsExclusive flat 360 degree "sweep" contact design provides up to 60% more contact area than other switch designsSurface or rear panel mountingMarine grade constructionOne year warrantyWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
7718100 - ML-Series Solenoid Switch - Deutsch Connector - 12VFor applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.Features:
Silver alloy contacts provide high reliability for switching live loads
LED output to remotely indicate switch state
3/8"- 16 tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece stainless flange nuts for safe and secure connections
Label recesses for circuit identification
Technical Specifications:
Control Circuit Voltage - 10.1 to 16.5 V DC
Control Circuit Connection - Deutsch DTM
Nominal Voltage - 12V DC
Coil Function - Auto-releasing
Amperage Operating Current - OFF - 8mA and ON 13mA
Mechanical Endurance - 100,000 Cycles
Terminal Ring Diameter Clearance - 1.18" (30mm)
Terminal Stud Length - .875" (22mm)
Terminal Stud Size - 3/8" - 16 (M10)
In the Box:
7718100 Solenoid
Contura Switch w/integrated LED
Instruction Manual
*Sold as an Individual
5001 Fuse Block MEGA 100-300A with Cover Features:
The most economical system for 100-300 Ampere fusing
Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow wire access in any direction
For use on systems up to 32V DC
5/16" stud terminals accept 5/16" (M8) Ring Terminals, 14AWG to 2/0 AWG Wire
Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
UL 94-V0 base resists high heat
Insert molded studs ensure secure fuse mounting
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Fuse Type: MEGA/AMG
Type: Fuse Blocks
Box Dimensions: 2"H x 4"W x 8"L WT: 0.4 lbs
UPC: 632085050016
Self-Extinguishing Split Loom 3/4" x 100'Features:
Permits flexible routing of cable harnesses
Provides abrasion protection for wire and cable
Allows lead-outs at any point for the greatest ease of installation
Split loom temperature range is -40°F to 275°F / -40°C to 135°C
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 12"H x 12"W x 24"L WT: 4.6 lbs
UPC: 091887967524
12-10 AWG - #6 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 12-10 AWG
Post Size: #6
Package Qty: 25
Heat Shrink: No
Type: Ring Terminals
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 091887212211
Brochure (pdf)
6 AWG - 1/4" Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Ring Terminals
Post Size: 1/4"
Package Qty: 25
Heat Shrink: No
Gauge: 6 AWG
Box Dimensions: 1"H x 3"W x 4"L WT: 0.4 lbs
UPC: 091887212440
Brochure (pdf)