Electrical

16-14 AWG Fully-Insulated Male Disconnect Terminal - Blue - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 16-14 Disc./Bullet Size: 0.250 in. Insulation Color: Blue Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248207591 Brochure (pdf)

Read more less

Tinned Lug 2 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2 Stud Size: 3/8” Length: 1.625” Width: 0.609” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.25 lbs UPC: 840248205610 Brochure (pdf)

Read more less

Tinned Lug 2/0 AWG - 1/4" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2/0 Stud Size: 1/4” Length: 2.063” Width: 0.813” Clearance: 0.500” Package Size: 10 Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/4" Type: Lugs Box Dimensions: 1"H x 5"W x 8"L WT: 0.5 lbs UPC: 840248205511 Brochure (pdf)

Read more less

Tinned Lug 2/0 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2/0 Stud Size: 3/8” Length: 2.063” Width: 0.813” Clearance: 0.500” Package Size: 10 Specifications: Gauge: 2/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.5 lbs UPC: 840248205535 Brochure (pdf)

Read more less

Orange 20-22 AWG Wire Ferrule - 6mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 20-22 Insulation Color: Orange Ferrule Length: 6mm (0.24 in.) Stripping Length: 8mm (0.31 in.) Quick Guide (pdf)

Read more less

Push/Pull Switch Two-PositionTwo-position, off/on. For operating one set of lights or other accessory.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-OFF Color: Chrome Plated Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs UPC: 022697756336

Read more less

115-12-35CD Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 7.5 Maximum Input Current @230: 3.5 Output Amperage (Intermittent): 35 Output Amperage (Continuous): 35 Weight: 32 lbs. / 14.6 kg Case Size:H x W x D (inch): 6.5” x 9.5” x 14.0”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureC.D. Units - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 13.6 VDC (internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

4 12V Battery Parallel Quick Connect System4 12V parallel Quick connect Battery system for extended weekend RV or off-the-grid fun. 6 gauge marine grade tinned wire with 60 to 110 amp capability.The Connect-Ease RCE412VRV allows connecting four 12-volt batteries in parallel to provide users with a much longer runtime when away from any wired, plug-in power source. Connect-Ease designed this (4) 12V parallel system specifically with RV and off-grid enthusiasts in mind whose power requirements are much greater than the limited runtime a single 12V battery can provide.Features: Plug & Play Connections are Lithium Compatible The serious off-roader needs a lot of power camping rig Dispersed Camping takes plenty of power. Handles 60 to 240 amps of DC power Lithium Compatible

Read more less

Outboard Dual Battery Isolator/ACR & ACCSConnect another battery for increased fishing time, and power all of your electronics all day without the worry of draining your starting battery. This unique system allows you to quickly add another battery to your house or starting battery with ACR capability to isolate your starting battery for powering large outboards like the Verado. Add an RCE12VB4 or RCE124F connector to connect your console and extra electronics.A Dual Parallel Battery Connection for Boats is needed to isolate the starting battery for Large outboards. The battery draws power independently but will charge off the alternator, or charge at the same time.at the same time. 300 HP and up need full clean voltage to start, using this product you can run all your electronics, live wells, and bilge pumps off the secondary battery, without drawing any power from your main starting battery, always have power for starting your motor.. always have the power you need for spending more time on the water. Dual 12V Starting Battery/with isolated house battery w/Accessories kit, we’ve got the perfect solution for rigging your outboard to power via 6 gauge wire leads on both ends and an 8 gauge accessories connector add an RCE12VB4 to connect multiple graphs, live imaging, and/or forward-facing sonar transducers and black boxes.Features: Plug & Play Connections  Lithium Compatible UL 1977 60 to 240 amps of DC power

Read more less

Outboard Motor Dual Battery Kit 6 AWGConnect another battery for increased fishing time, and power all of your electronics all day without the worry of draining your starting battery.This unique system allows you to quickly add another battery to your house or start a battery.Add an RCE12VB4 or RCE124VBF connector to connect your console and extra electronics.RCE12VBM6PK, Dual Parallel Battery Connection for Boats needed to create more power for running your electronics, live wells, bilge pumps, power poles, and more starting batteries for Large outboards, battery draw power from both batteries and will charge together off the alternator, or charger at the same time. If you need more power and voltage to start, using this product you can run all your electronics, live wells, and bilge pumps off a dual battery setup this is the product to power your boat for longer days on the water without the worry of draining your main battery, always have the power you need for spending more time on the water. Dual 12V Starting Battery/Outboard Motor with accessories kit, we’ve got the perfect solution for rigging your outboard to power via 6 gauge wire leads on both ends and an 8 gauge battery side connector add an RCE12VB4 to connect multiple graphs, live imaging, and/or forward-facing sonar transducers and black boxes, This kit sets your boat up with perfect connections for your starting motor.Features: Plug & Play Connections  Lithium Compatible UL 1977 60 to 240 amps of DC power

Read more less

36V Trolling Motor Separated Battery SystemThis is a 5 ft. extension on the RCE36VB5CHK kit. Designed for boats with two batteries in one compartment and the third in a different compartment.Features: Plug & play connections 8-gauge marine grade wire with 60” separated battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible

Read more less

Multi 4 Lead Accessory for Main BatteryThe Multi 4 connector is for connecting your fishing, ice fishing, or other accessories. Connect an onboard charger, depth finders, downriggers, radios, lights, and a host of other accessories. Use with:  RCE12VBPK RCE12VB0MK RCE12VBM6K RCE12VBM6CK RCE12VBM6ICK  RCE12VBM6PK Features: Multi 4 connection to power your outdoor equipment easily and quickly Plug & Play Connections  Lithium Compatible Suitable for use t-40° to 221° UL1977  120 Amp Rating

Read more less