DT Deutsch Receptacle Repair Kit - 14-18 AWG (3 Position)Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 18-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (18-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 3
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Pins
Operating Temperature: -55°C to 125°C
Contents:
(1) 3 pos. receptacle
(1) 3 pos. wedge lock
(4) pins
(1) cavity plug
Quick Guide (pdf)
Battery Isolator - 1 Alternator - 3 Battery - 70 AMPProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps. Owner's Manual (pdf)
ProSportHD 8 Gen 4 - 8 Amp - 2 Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Portable: No
Charging Banks: 2
Charger Output Voltage: 12/24v
Charger Output - Amps: 8a
Charger Input - Voltage: 120v
Box Dimensions: 7"H x 9"W x 12"L WT: 6.05 lbs
UPC: 031669440081
DPDT Rocker Switch - 12V/24V - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time.Features:
Nominal voltage is 12V DC
Rated for 25A at 12V DC
Six 1/4" blade terminals
Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Same as Cole Hersee part number 58027-11
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Throw/Pole: DPDT
Color: Black
Action: (ON)-OFF-(ON)
Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs
UPC: 870216046341
DC Master 24V to 12V Converter - 12A w/IsolatorPower you can rely onThe required voltage for DC current can vary. Some equipment requires 24 V, while onboard equipment usually requires 12 V. For custom DC current, Mastervolt offers a series of compact and made to measure DC-DC converters for both 12 V and 24 V battery systems that offer stable power with the right current for any connected consumer. There is a wide range of DC Master converters available, including insulated and non-insulated models.Benefits
Recreational and semi-professional use.
Easy to install using included mounting bracket, screws and fasteners.
Smart electronics mean no unnecessary heat generation.
Continuous output.
Insulated and non-insulated models available.
Two minutes of extra power for short power boosts.
Excellent price/performance ratio.
Intelligent DC-DC convertersA large benefit of the DC Master models is their two minutes of extra capacity; ideal if you need a short power boost.Complete package DC MasterAll DC Master converters are delivered with mounting bracket, screws and fasteners.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Input - Voltage: 24v
Charger Output - Amps: 12a
Charger Output Voltage: 12v
Box Dimensions: 2"H x 4"W x 7"L WT: 1.5 lbs
UPC: 852968002554
Owner's Manual (pdf)Brochure (pdf)
22-18 Gauge - 3/8" Heat Shrink Ring Terminal - 25-PackWire Range:22-18Screw Size: 3/8"Quantity: 25Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 22-18 AWG
Package Qty: 25
Heat Shrink: Yes
Type: Ring Terminals
Post Size: 3/8"
Box Dimensions: 1"H x 3"W x 4"L WT: 0.08 lbs
UPC: 091887311150
Quick Guide (pdf)
All Digital Electronic ChargingIndustry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today's power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.ProMar Digital Performance ChargingProMar Digital Charging Performance - 12 Selectable ProfilesUp to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.Power Factor Correction - Global AC InputAuto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.Distributed On Demand TechnologyAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.Digital Self-Calculating Absorption and Battery Health Re-Conditioning ModeAutomatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.Conservation Energy Saver ModeAfter 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles) Service and Fault Mode LED IndicatorsReal time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system.Automatic Fan Speed ControlQuiet operation. Innovative front exhaust prevents restriction of air flow and cooling.Automatic Temperature Compensation and Built-in SafetyRemote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output - Amps: 40a
Charging Banks: 3
Portable: No
Charger Input - Voltage: 120/240v
Charger Output Voltage: 12v
Box Dimensions: 6"H x 11"W x 13"L WT: 6.8 lbs
UPC: 031669631403
Owner's Manual (pdf)Brochure (pdf)
ProSafe FAILSAFE 60amp Galvanic IsolatorProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
ABYC A-28 July '08 Compliant and Fail Safe CertifiedCertified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
Flat Pack High Power SemiconductorsRobust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
Ignition ProtectedMeets ISO 8846 and can be mounted within an engine compartment.
Gold Plated Terminations WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
Current Model Outboard Solenoid with Flat Isolated BaseThe outboard solenoid will fit the current model Mercruiser and Mercury. Isolated base, 12 Volt.Replaces:MERCURY 89-850189MERCURY 89-850189TMERCURY 89-91975MERCURY 89-96054MERCURY 89-96054T*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Parts
Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs
UPC: 693006001616
Tank Level Monitor Sender InterfaceThe 600-TLM-SIF signal converter module is used to convert from 10-180 ohm, or 240-33 ohm tank sender outputs, to a 0-5V output. BEP equipment that uses a 0-5 volt signal input includes the DCSM DC/Systems Monitor, CZone Digital Switching/Monitoring, and the 600-TLM tank monitor.
5235ATO/ATC Fuse1A
Fast-acting type fuse ideal for electronic devices
Standard circuit protection device for automobiles and trucks
Tin-plated connector blades for corrosion resistance
Visible indication of blown condition
Sold in packages of 2
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 1a
Fuse Type: ATO/ATC
Type: Fuses
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 632085052355
Battery Switch Key Lock Replacement - RedReplacement Key Lock for Battery SwitchWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.