22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 100-PackWire Range:22-18Screw Size: 1/4"Quantity: 100Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 22-18 AWG
Heat Shrink: Yes
Post Size: 1/4"
Type: Ring Terminals
Package Qty: 100
Box Dimensions: 2"H x 3"W x 4"L WT: 0.3 lbs
UPC: 091887311082
Quick Guide (pdf)
Beige 2 AWG Wire Ferrule - 16mm Length - 10 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features:
Prevent strand separation while minimizing strand breakage
Insulated ferrules provide additional electrical insulation
Increase connection reliability when terminating stranded wire in terminal blocks
Specifications:
Package Size: 10
Wire Size (AWG): 2
Insulation Color: Beige
Ferrule Length: 16mm (0.63 in.)
Stripping Length: 18mm (0.75 in.)
Quick Guide (pdf)
DT Deutsch Plug Repair Kit - 14-18 AWG (4 Position)Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 4
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 4 pos. plug
(1) 4 pos. wedge lock
(5) sockets
(2) cavity plugs
Quick Guide (pdf)
Mounting Panel for Toggle Type Magnetic Circuit Breakers
Mounts A-Series Double Pole Toggle Circuit Breakers
Slate gray matches standard panel color
Mounts A-Series double pole toggle circuit breaker
1/8" aluminum 5052 alloy
Accepts Blue Sea Systems label
"Power On" and "Reverse Polarity" LEDs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Cruiser Series Battery Selector Switch without AFDThis battery switch can be used on 6, 12, 24 or 36V systems.Features:
Polycarbonate case
Surface mount
Cable Lug Size: 3/8"
Dimensions: 5.50" x 2.63"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Single Jack Coax USB-C ConnectorBuild or expand a SmartPlug data port with this single USB-C connector.Features:Single USB-C connector portSpecifications:
Material: Non-metallic
Color: Black
Quick Guide (pdf)
Single Jack USB ConnectorBuild or expand a SmartPlug data port with this single-jack USB connector.Features:Single USB-A connector portSpecifications:
Material: Non-metallic
Color: Black
Quick Guide (pdf)
Phoenix Inverter Control f/ VE.Direct InvertersThis panel is intended for all VE.DIRECT Phoenix Inverters.The panel connects to the inverter's remote on/off (H/L) port via two wires, not provided.*Sold as an IndividualPlease contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Color: Grey
Type: Switches
Box Dimensions: 2"H x 4"W x 5"L WT: 1 lbs
UPC: 8719076041344
Quick Guide (pdf)Brochure (pdf)
9353 AC Analog Voltmeter 0-150V ACFeatures:
Dial marked in 5V increments
Simple 2-wire connection to AC hot and neutral
Meter sense and powers from same connection
Backlit meter face
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
Bilge Pump Water Alarm Panel with SwitchThis bilge pump water alarm panel with a switch provides both an audible and visual means of warning that the water level in your bilge is above your bilge pump float switch level. There is no need for a separate bilge pump switch, as the control switch selects between the automatic and manual (momentary on) functions of the bilge pump.Features:
20A fuse holder
Constructed of injection molded ABS
Installs with a gasket and four RH fasteners (included)
Specifications:
Length (inch): 4-11/16"
Width (inch): 2-3/8"
Width Between Fasteners (inch): 1-1/2"
Length Between Fasteners (inch): 3-7/8"
Volts: 12
Weight: 0.33 lb.
Color: Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Box Dimensions: 3"H x 4"W x 7"L WT: 0.4 lbs
UPC: 035514423878
1-3-70 Battery IsolatorThis heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems. Features:
Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
Heavy-duty construction
Rated for systems up to 48 volts DC, negative ground
Rust-proof anodized aluminum case
Stainless steel mounting hardware is provided
Protective covers are provided for terminals
Specifications:
Alternator Sources: 1
Battery Bank: 3
Max. Amperage Input Capacity: 70
Stud Terminal Size: 6mm
Dimensions (L x W x H): 3.25 x 4.5 x 3.1 inches
Weight: 2 lbs.
Operating Temperature: -40 to +80 degrees
Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configurationThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)
Skylla-TG Charger - 24/30 GMDSSThis Victron Skylla-TG 24/30 Charger has been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight-wire UTP cable connects the charger to the panel.GMDSSThe Global Maritime Distress & Safety System (GMDSS) was developed by the International Maritime Organisation (IMO) to improve maritime distress and safety communications.Power SupplyThe Skylla TG has proven itself to be an excellent battery charger and power supply for GMDSS applications. However, when using a standard Skylla charger, additional equipment is needed to perform the monitoring and alarm functions required for GMDSS.Installation Made Easy: The Skylla GMDSSThe Victron Skylla GMDSS Charger has been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight-wire UTP cable connects the charger to the panel. Skylla TG 24 30 GMDSSNo Adjustments NeededThe whole system is ‘click and go’: the panels are pre-programmed for GMDSS functionality. A simple, intuitive menu allows changing of settings if required.Battery Time To GoThe Skylla GMDSS charger has a built-in battery controller. The capacity of the battery is fully monitored, so the panel can even indicate the ’time to go’ in case of a power supply blackout.Perfect Charger for Any Type of BatteryCharge voltage can be precisely adjusted to suit any VRLA or flooded battery system.Specifications:
Input Voltage (V AC): 120 / 230
Input Voltage Range (V AC): 90-265
Frequency (Hz): 45-65
Power Factor: 1
Charge Voltage ‘Absorption’ (V DC): 28,5
Charge Voltage 'Float' (V DC): 26,5
Charge Current (A): 30 (limited to 22 A at 110 V AC)
Charge Characteristic: IUoUo (three-step)
Temperature Sensor: Yes
Can Be Used as Power Supply: Yes
Forced Cooling: Yes
Protection: a, b, c, d
Operating Temp. Range: -40 to +50 degrees C (-40 – 122 degrees F)
Humidity (non-condensing): Max 95%
Enclosure Specifications:
Material & Color: Aluminium (blue RAL 5012)
Battery-Connection: Two 1,5 m Cables
GMDSS connection One 1,5 m cable (+ to be taken directly from the battery)
230 V AC-Connection: Three wire 2,5 mm² (AWG 6); Cable Length: 2 m
Protection Category: IP 21
Weight kg (lbs.): 6 (13)
Dimensions H x W x D in mm (H x W x D in inches): 485 x 250 x147 (19.1 x 9.9 x 5.8)
Accessories:
VE.Net GMDSS panel: To be ordered separately
UTP-cable: To be ordered separately
Standards
Safety: EN 60335-1, EN 60335-2-29
Emission Immunity: EN 55014-1, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-3-3
Maritime Nav. & Radiocomm: IEC 60945
Protection Key: a) Output short circuit; b) Battery reverse polarity detection; c) Battery voltage too high; d) Temperature too high IEC 60945 Remote panel GMDSS; 2) Up to 40 degrees C (100 degrees F) ambient
Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Charger Input - Voltage: 120/230v
Box Dimensions: 9"H x 13"W x 23"L WT: 19.2 lbs
UPC: 8719076025726
Quick Guide (pdf)Brochure (pdf)