Original Equipment Quality Replacement Solenoid for Mercruiser & Mercury - Isolated base, 12VReplacement solenoid that will fit Mercruiser and Mercury. Isolated base, 12 Volt, white housing.Replaces:
MERCURY 89-818864
MERCURY 89-818864T
SIERRA 18-5818
*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Galvanic Isolator VDI-16A, 16 AMP Max Waterproof PottedThe galvanic isolator prevents electrolytic corrosion. It blocks low-voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft, and so on.The galvanic isolator consists internally of two diodes which are connected in an anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.The isolator is installed directly behind your boat's 120V - 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.Please contact your dealer for any returns, repairs or support issues related to this product. Owner's Manual (pdf)
GX Touch 50 Protection CoverThe GX Touch 50 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Model (inch): 5"Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Type: Covers
Box Dimensions: 1"H x 4"W x 6"L WT: 0.1 lbs
UPC: 8719076060093
Quick Guide (pdf)
GX Touch 70 Protection CoverThe GX Touch 70 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Model (inch): 7"Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Type: Covers
Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs
UPC: 8719076060109
Quick Guide (pdf)
Round 6 Conductor Cable - 250' - 16/6 AWG - Black, Brown, Red, Green, Blue & WhiteRound boat cable is the ideal choice for installation in tight spaces like boat hulls. All Pacer round boat cable is manufactured in Sarasota FL, USA. Pacer's manufactured 16 AWG round boat cable is UL approved. The tinned copper conductors provide resistance to corrosion. This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons. One reason it works so well is the fact that it can bend in any direction. With other, flatter cables, your range of motion is limited. It is also made from Type III finely stranded tinned copper conductors and it has a flexible high-quality PVC insulation and jacket. These things work together to make this the best boat cable available and the easiest to install in small workspaces. It also withstands the frequent vibration and flex commonly found in marine environments. Features:
16 AWG round boat cable
250 ft. of cable
No. of Conductors: 6
Pacer's boat cable is the perfect choice for many marine jobs
It's ideal for running through sailing spars, poling platforms, and t-tops
Also, it is the perfect choice for small hulls or other tight areas
Type III, stranded, tinned copper conductors
Highly flexible
Easy to install and organize
Easily sealed through bulkheads
Specifications:
Conductor Colors: Black, brown, red, green, blue & white
Conductor Stranding: 26/.0100
Jacket Color: Grey
Jacket Thickness (inch): 6 conductors @ 0.045"
Nom. Cable O.D. (inch): 6 conductors @ 0.455"
Characteristics:
Conductor: Annealed Fine Stranded Tinned Copper
ASTM B172 Class K
Insulation: -20 °C to 105 °C Flexible, Color Coded PVC
Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil
Voltage Rating: 600 V
Resistant to: acid, alkali, abrasion, flame, gasoline, oil, and moisture
Applications:Pacer's round boat cable is excellent for AC and DC internal wiring of boats and recreational vehiclesCompliances:
UL Standard 1426 (BC-5W2)
ABYC: E-11.16
Coast Guard: 33 CFR part 183
RoHS Compliant
Specifications:
Color: Black/Brown/Blue/Green/White/Red
Gauge: 16/6 AWG
Length (Feet): 250'
Box Dimensions: 12"H x 13"W x 14"L WT: 39.5 lbs
Quick Guide (pdf)
Standard Duplex Cable - Flat 16/2 AWG - 2 x 1mm² Red/Black -Sold by the FootAncor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. Specifications:
Color: Red/Black
Gauge: 16/2 AWG
Length (Feet): Sold By The Foot
Box Dimensions: 1"H x 1"W x 12"L WT: 0.2 lbs
Alternator 100 AMP 12V 1-2" Single Foot Spindle Mount J10 Pulley with Isolated GroundAlternator, 621 Series, 100A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces: 621-100-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 100A
Voltage: 12v
Box Dimensions: 9"H x 10"W x 10"L WT: 12.9 lbs
UPC: 676205500685
Brochure (pdf)
Inverter Remote On-Off CableUse this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350, or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
VE.Bus BMS: the Inverter will be switched off when the batteries are empty
BlueSolar MPPT Charger: connecting an inverter directly to the load output of a BlueSolar MPPT Charger is not possible; the inverter needs to be connected to the battery. Then use this cable to switch the inverter on and off with the load output.
Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)
Alternator 120 AMP Kit 12V 3.15" Dual Foot Saddle Dual Vee Pulley Regulator & Temp SensorKit Includes: a 60-120-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-120-DV Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-120-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 120A
Voltage: 12v
Box Dimensions: 10"H x 11"W x 14"L WT: 9 lbs
UPC: 676205000512
Brochure (pdf)
Alternator 100 AMP Kit 12V 1-2" Single Foot Spindle Mount J10 Pulley Regulator & Temp SensorKit Includes: 621-100-J10 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware621-100-J10 Alternator: 100A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces: 621-VUP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 100A
Voltage: 12v
Box Dimensions: 10"H x 11"W x 14"L WT: 15.85 lbs
UPC: 676205500722
Brochure (pdf)
Alternator 170 AMP 12V 3.15" Dual Foot Saddle K6 PulleyAlternator, XT Series, 170A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-165-12-IG, AT-DF-165-K6This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 170A
Voltage: 12v
Box Dimensions: 9"H x 9"W x 10"L WT: 14 lbs
Brochure (pdf)
Premium Replacement Inboard Alternator with 55mm Multi-Groove Pulley - 12V 65AReplacement alternator that will fit Late model Volvo Penta, 12 Volt, 75 Amp, 50-mm multi-groove serpentine pulley included.Features:
All alternators are engineered for performance and reliability
All alternators are engineered and manufactured with precision and quality
All alternators must meet or exceed OEM performance before being boxed
Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:VOLVO Alternator 3862665VOLVO Alternator 3884950SIERRA Alternator 18-5882SIERRA Alternator 18-6845This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 65A
Voltage: 12v
Box Dimensions: 8"H x 8"W x 9"L WT: 10.3 lbs
UPC: 693006009544
Quick Guide (pdf)